IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v197y2022icp627-642.html
   My bibliography  Save this article

Performance assessment of a modified wells turbine using an integrated casing groove and Gurney flap design for wave energy conversion

Author

Listed:
  • Kotb, Ahmed T.M.
  • Nawar, Mohamed A.A.
  • Attai, Youssef A.
  • Mohamed, Mohamed H.

Abstract

The present study investigates the effect of a triangular casing groove depth and width on Wells turbine performance. Furthermore, it presents an integrated method to boost the power produced by the Wells turbine and delay the stall. This integrated method is implemented by combining the effect of the triangular casing groove with a rectangular Gurney flap (GF). The Gurney flap (GF) increases the lift coefficient by modifying the Kutta condition at the trailing edge. At the same time, the triangular casing groove improves the flow near the blade tip, leading to a delay in the stall inception. The Wells turbine performance is evaluated by solving numerically 3D incompressible Reynolds-Averaged Navier-Stokes equations. To solve the flow characteristics through the turbine, an SST k-ω turbulence model is used, which is validated and verified using previous experimental and numerical works. The results proved that the Wells turbine average torque coefficient increased by 81.11% when using a triangular casing groove and a rectangular Gurney flap. Moreover, the stall inception is delayed from a flow coefficient of 0.225–0.350, which increases the operating range by 55.50% and reduces the maximum efficiency compared with the conventional Wells turbine.

Suggested Citation

  • Kotb, Ahmed T.M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2022. "Performance assessment of a modified wells turbine using an integrated casing groove and Gurney flap design for wave energy conversion," Renewable Energy, Elsevier, vol. 197(C), pages 627-642.
    • Handle: RePEc:eee:renene:v:197:y:2022:i:c:p:627-642
    DOI: 10.1016/j.renene.2022.07.140
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148122011430
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2022.07.140?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Halder, Paresh & Samad, Abdus & Kim, Jin-Hyuk & Choi, Young-Seok, 2015. "High performance ocean energy harvesting turbine design–A new casing treatment scheme," Energy, Elsevier, vol. 86(C), pages 219-231.
    2. Kim, T.H. & Setoguchi, T. & Kaneko, K. & Raghunathan, S., 2002. "Numerical investigation on the effect of blade sweep on the performance of Wells turbine," Renewable Energy, Elsevier, vol. 25(2), pages 235-248.
    3. Govardhan, M. & Dhanasekaran, T.S., 2002. "Effect of guide vanes on the performance of a self-rectifying air turbine with constant and variable chord rotors," Renewable Energy, Elsevier, vol. 26(2), pages 201-219.
    4. Torresi, M. & Camporeale, S.M. & Strippoli, P.D. & Pascazio, G., 2008. "Accurate numerical simulation of a high solidity Wells turbine," Renewable Energy, Elsevier, vol. 33(4), pages 735-747.
    5. Halder, Paresh & Samad, Abdus & Thévenin, Dominique, 2017. "Improved design of a Wells turbine for higher operating range," Renewable Energy, Elsevier, vol. 106(C), pages 122-134.
    6. Mohamed, M.H. & Janiga, G. & Pap, E. & Thévenin, D., 2011. "Multi-objective optimization of the airfoil shape of Wells turbine used for wave energy conversion," Energy, Elsevier, vol. 36(1), pages 438-446.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Stefanizzi, Michele & Camporeale, Sergio Mario & Torresi, Marco, 2023. "Experimental investigation of a Wells turbine under dynamic stall conditions for wave energy conversion," Renewable Energy, Elsevier, vol. 214(C), pages 369-382.
    2. Kotb, Ahmed T.M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2023. "Performance enhancement of a Wells turbine using CFD-optimization algorithms coupling," Energy, Elsevier, vol. 282(C).
    3. Kotb, Ahmed T.M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2024. "Impact of tapered leading-edge micro-cylinder on the performance of wells turbine for wave energy conversion: CFD-optimization algorithms coupling study," Energy, Elsevier, vol. 293(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kotb, Ahmed T.M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2023. "Performance enhancement of a Wells turbine using CFD-optimization algorithms coupling," Energy, Elsevier, vol. 282(C).
    2. Kotb, Ahmed T.M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2024. "Impact of tapered leading-edge micro-cylinder on the performance of wells turbine for wave energy conversion: CFD-optimization algorithms coupling study," Energy, Elsevier, vol. 293(C).
    3. Halder, Paresh & Samad, Abdus & Thévenin, Dominique, 2017. "Improved design of a Wells turbine for higher operating range," Renewable Energy, Elsevier, vol. 106(C), pages 122-134.
    4. Das, Tapas K. & Samad, Abdus, 2020. "Influence of stall fences on the performance of Wells turbine," Energy, Elsevier, vol. 194(C).
    5. Paresh Halder & Hideki Takebe & Krisna Pawitan & Jun Fujita & Shuji Misumi & Tsumoru Shintake, 2020. "Turbine Characteristics of Wave Energy Conversion Device for Extraction Power Using Breaking Waves," Energies, MDPI, vol. 13(4), pages 1-17, February.
    6. Ansarifard, Nazanin & Kianejad, S.S. & Fleming, Alan & Henderson, Alan & Chai, Shuhong, 2020. "Design optimization of a purely radial turbine for operation in the inhalation mode of an oscillating water column," Renewable Energy, Elsevier, vol. 152(C), pages 540-556.
    7. Geng, Kaihe & Yang, Ce & Zhao, Ben & Zhao, Wei & Gao, Jianbing & Hu, Chenxing & Zhang, Hanzhi & Wu, Wangxia, 2023. "Residual circulation budget analysis in a Wells turbine with leading-edge micro-cylinders," Renewable Energy, Elsevier, vol. 216(C).
    8. Geng, Kaihe & Yang, Ce & Hu, Chenxing & Li, Yanzhao & Yang, Changmao, 2022. "Numerical investigation on the loss audit of Wells turbine with exergy analysis," Renewable Energy, Elsevier, vol. 189(C), pages 273-287.
    9. Nazeryan, Mohammad & Lakzian, Esmail, 2018. "Detailed entropy generation analysis of a Wells turbine using the variation of the blade thickness," Energy, Elsevier, vol. 143(C), pages 385-405.
    10. Halder, Paresh & Samad, Abdus & Kim, Jin-Hyuk & Choi, Young-Seok, 2015. "High performance ocean energy harvesting turbine design–A new casing treatment scheme," Energy, Elsevier, vol. 86(C), pages 219-231.
    11. Mohamed, M.H. & Shaaban, S., 2013. "Optimization of blade pitch angle of an axial turbine used for wave energy conversion," Energy, Elsevier, vol. 56(C), pages 229-239.
    12. Das, Tapas K. & Kumar, Kumud & Samad, Abdus, 2020. "Experimental Analysis of a Biplane Wells Turbine under Different Load Conditions," Energy, Elsevier, vol. 206(C).
    13. Abdullah Saad Alkhalifa & Mohammad Nasim Uddin & Michael Atkinson, 2022. "Aerodynamic Performance Analysis of Trailing Edge Serrations on a Wells Turbine," Energies, MDPI, vol. 15(23), pages 1-21, November.
    14. Shehata, Ahmed S. & Xiao, Qing & El-Shaib, Mohamed & Sharara, Ashraf & Alexander, Day, 2017. "Comparative analysis of different wave turbine designs based on conditions relevant to northern coast of Egypt," Energy, Elsevier, vol. 120(C), pages 450-467.
    15. Liu, Hua & Wang, Weijun & Wen, Yadong & Mao, Longbo & Wang, Wenqiang & Mi, Hongju, 2019. "A novel axial flow self-rectifying turbine for use in wave energy converters," Energy, Elsevier, vol. 189(C).
    16. Guo, Peng & Zhang, Yongliang & Chen, Wenchuang, 2023. "Numerical analysis on a self-rectifying impulse turbine with U-shaped duct for oscillating water column wave energy conversion," Energy, Elsevier, vol. 274(C).
    17. Dhanasekaran, T.S. & Govardhan, M., 2005. "Computational analysis of performance and flow investigation on wells turbine for wave energy conversion," Renewable Energy, Elsevier, vol. 30(14), pages 2129-2147.
    18. Licheri, Fabio & Ghisu, Tiziano & Cambuli, Francesco & Puddu, Pierpaolo, 2022. "Detailed investigation of the local flow-field in a Wells turbine coupled to an OWC simulator," Renewable Energy, Elsevier, vol. 197(C), pages 583-593.
    19. Luana Gurnari & Pasquale G. F. Filianoti & Marco Torresi & Sergio M. Camporeale, 2020. "The Wave-to-Wire Energy Conversion Process for a Fixed U-OWC Device," Energies, MDPI, vol. 13(1), pages 1-25, January.
    20. Nishi, Yasuyuki & Mori, Nozomi & Yamada, Naoki & Inagaki, Terumi, 2022. "Study on the design method for axial flow runner that combines design of experiments, response surface method, and optimization method to one-dimensional design method," Renewable Energy, Elsevier, vol. 185(C), pages 96-110.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:197:y:2022:i:c:p:627-642. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.