IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v137y2019icp45-55.html
   My bibliography  Save this article

Numerical and experimental study of building integrated solar tile collectors

Author

Listed:
  • Fekete, István
  • Farkas, István

Abstract

This paper is dealing with the development of a new type of shell-structured solar collector for the heat exploitation of solar energy for building use and to determine its thermal efficiency. The literature review confirms that solar collectors appreciated not only by their usefulness, but also according to their aesthetic considerations. In addition to traditional solar collectors it is viable to study the solutions how the structural elements of the buildings can also be used to capture solar energy, when the architectural design would not change, but the required surface operates as solar collector. During the modelling and simulation of the shell-structured solar system strong consideration was given to the efficiency issues. The energy balance equation of the collector includes the influencing factors especially the radiation and heat convection, which are expressed by their heat loss coefficients. Based on the measurements it can be stated that in the case of the simplest structural design (no thermal insulation, no surface covering) the working fluid can warm up to 20–25 °C. Concerning to the structural design the built-in pipe diameter cannot be increased over the half of the concrete tile thickness, and it is not suggested to increase the pipe length beyond 3 m within the tile. A recommended use of such architectural elements can be designed for renovation of buildings, along with the active utilization of solar energy in order to meet the increasingly stringent energy standards for buildings.

Suggested Citation

  • Fekete, István & Farkas, István, 2019. "Numerical and experimental study of building integrated solar tile collectors," Renewable Energy, Elsevier, vol. 137(C), pages 45-55.
  • Handle: RePEc:eee:renene:v:137:y:2019:i:c:p:45-55
    DOI: 10.1016/j.renene.2018.02.103
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148118302477
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2018.02.103?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Deng, Jie & Xu, Yupeng & Yang, Xudong, 2015. "A dynamic thermal performance model for flat-plate solar collectors based on the thermal inertia correction of the steady-state test method," Renewable Energy, Elsevier, vol. 76(C), pages 679-686.
    2. Mekhilef, S. & Saidur, R. & Safari, A., 2011. "A review on solar energy use in industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 1777-1790, May.
    3. Navarro, Lidia & de Gracia, Alvaro & Colclough, Shane & Browne, Maria & McCormack, Sarah J. & Griffiths, Philip & Cabeza, Luisa F., 2016. "Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systems," Renewable Energy, Elsevier, vol. 88(C), pages 526-547.
    4. Juanicó, Luis & Dilalla, Nicolás, 2016. "The pulsed-flow design: A new low-cost solar collector," Renewable Energy, Elsevier, vol. 87(P1), pages 422-429.
    5. Navarro, Lidia & de Gracia, Alvaro & Niall, Dervilla & Castell, Albert & Browne, Maria & McCormack, Sarah J. & Griffiths, Philip & Cabeza, Luisa F., 2016. "Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system," Renewable Energy, Elsevier, vol. 85(C), pages 1334-1356.
    6. Martinopoulos, G. & Missirlis, D. & Tsilingiridis, G. & Yakinthos, K. & Kyriakis, N., 2010. "CFD modeling of a polymer solar collector," Renewable Energy, Elsevier, vol. 35(7), pages 1499-1508.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sun, Chengpeng & Wu, Haifeng & Wang, Ruixiang & Xing, Meibo & Tang, Wentao, 2022. "An improvement approach for the solar collector by optimizing the interface of assembling structure," Renewable Energy, Elsevier, vol. 195(C), pages 688-700.
    2. Vassiliades, C. & Agathokleous, R. & Barone, G. & Forzano, C. & Giuzio, G.F. & Palombo, A. & Buonomano, A. & Kalogirou, S., 2022. "Building integration of active solar energy systems: A review of geometrical and architectural characteristics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 164(C).
    3. Chengyi Li & Qunwu Huang & Yiping Wang, 2020. "Effect of Color Coating of Cover Plate on Thermal Behavior of Flat Plate Solar Collector," Energies, MDPI, vol. 13(24), pages 1-16, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Homod, Raad Z., 2018. "Analysis and optimization of HVAC control systems based on energy and performance considerations for smart buildings," Renewable Energy, Elsevier, vol. 126(C), pages 49-64.
    2. Fei, Wenbin & Bandeira Neto, Luis A. & Dai, Sheng & Cortes, Douglas D. & Narsilio, Guillermo A., 2023. "Numerical analyses of energy screw pile filled with phase change materials," Renewable Energy, Elsevier, vol. 202(C), pages 865-879.
    3. Behzadi, Amirmohammad & Holmberg, Sture & Duwig, Christophe & Haghighat, Fariborz & Ooka, Ryozo & Sadrizadeh, Sasan, 2022. "Smart design and control of thermal energy storage in low-temperature heating and high-temperature cooling systems: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).
    4. Drissi, Sarra & Ling, Tung-Chai & Mo, Kim Hung & Eddhahak, Anissa, 2019. "A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 467-484.
    5. Al-Jethelah, Manar & Tasnim, Syeda Humaira & Mahmud, Shohel & Dutta, Animesh, 2018. "Nano-PCM filled energy storage system for solar-thermal applications," Renewable Energy, Elsevier, vol. 126(C), pages 137-155.
    6. Yan, Tian & Zhou, Xuan & Xu, Xinhua & Yu, Jinghua & Li, Xianting, 2022. "Parametric analysis on performances of the pipe-encapsulated PCM (PenPCM) wall system coupled with gravity heat-pipe and nocturnal radiant cooler," Renewable Energy, Elsevier, vol. 196(C), pages 161-180.
    7. Juanicó, Luis E. & Di Lalla, Nicolás & González, Alejandro D., 2017. "Full thermal-hydraulic and solar modeling to study low-cost solar collectors based on a single long LDPE hose," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 187-195.
    8. Finck, Christian & Li, Rongling & Kramer, Rick & Zeiler, Wim, 2018. "Quantifying demand flexibility of power-to-heat and thermal energy storage in the control of building heating systems," Applied Energy, Elsevier, vol. 209(C), pages 409-425.
    9. Calabrese, Luigi & Brancato, Vincenza & Paolomba, Valeria & Proverbio, Edoardo, 2019. "An experimental study on the corrosion sensitivity of metal alloys for usage in PCM thermal energy storages," Renewable Energy, Elsevier, vol. 138(C), pages 1018-1027.
    10. Lizana, Jesús & Chacartegui, Ricardo & Barrios-Padura, Angela & Ortiz, Carlos, 2018. "Advanced low-carbon energy measures based on thermal energy storage in buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3705-3749.
    11. Cabeza, Luisa F. & de Gracia, Alvaro & Zsembinszki, Gabriel & Borri, Emiliano, 2021. "Perspectives on thermal energy storage research," Energy, Elsevier, vol. 231(C).
    12. Zhang, Yuan & Yang, Ke & Hong, Hui & Zhong, Xiaohui & Xu, Jianzhong, 2016. "Thermodynamic analysis of a novel energy storage system with carbon dioxide as working fluid," Renewable Energy, Elsevier, vol. 99(C), pages 682-697.
    13. Diego-Ayala, U. & Carrillo, J.G., 2016. "Evaluation of temperature and efficiency in relation to mass flow on a solar flat plate collector in Mexico," Renewable Energy, Elsevier, vol. 96(PA), pages 756-764.
    14. Atiq Ur Rehman & Shakil R. Sheikh & Zareena Kausar & Sarah J. McCormack, 2021. "Numerical Simulation of a Novel Dual Layered Phase Change Material Brick Wall for Human Comfort in Hot and Cold Climatic Conditions," Energies, MDPI, vol. 14(13), pages 1-19, July.
    15. Anh Tuan Le & Liang Wang & Yang Wang & Ngoc Tuan Vu & Daoliang Li, 2020. "Experimental Validation of a Low-Energy-Consumption Heating Model for Recirculating Aquaponic Systems," Energies, MDPI, vol. 13(8), pages 1-20, April.
    16. Zeyad Amin Al-Absi & Mohd Hafizal Mohd Isa & Mazran Ismail, 2020. "Phase Change Materials (PCMs) and Their Optimum Position in Building Walls," Sustainability, MDPI, vol. 12(4), pages 1-25, February.
    17. Cárdenas-Ramírez, Carolina & Gómez, Maryory A. & Jaramillo, Franklin & Fernández, Angel G. & Cabeza, Luisa F., 2021. "Experimental determination of thermal conductivity of fatty acid binary mixtures and their shape-stabilized composites," Renewable Energy, Elsevier, vol. 175(C), pages 1167-1173.
    18. Zheng, Huifan & Tian, Guoji & Yang, Chenwei & Zhao, Yahui & Cao, Luhan & Xin, Xin & Zhou, Jin & Zheng, Yunhan, 2022. "Experimental study on performance of phase change microcapsule cold storage solar composite refrigeration system," Renewable Energy, Elsevier, vol. 198(C), pages 1176-1185.
    19. Mohamed, Shamseldin A. & Al-Sulaiman, Fahad A. & Ibrahim, Nasiru I. & Zahir, Md. Hasan & Al-Ahmed, Amir & Saidur, R. & Yılbaş, B.S. & Sahin, A.Z., 2017. "A review on current status and challenges of inorganic phase change materials for thermal energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 1072-1089.
    20. Almalkawi, Areej T. & Soroushian, Parviz & Shrestha, Som S., 2019. "Evaluation of the Energy-Efficiency of an Aerated Slurry-Infiltrated Mesh Building System with Biomass-Based Insulation," Renewable Energy, Elsevier, vol. 133(C), pages 797-806.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:137:y:2019:i:c:p:45-55. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.