IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v127y2018icp125-133.html
   My bibliography  Save this article

Deterioration of seals of automotive fuel systems upon exposure to straight Jatropha oil and diesel

Author

Listed:
  • Farfan-Cabrera, Leonardo Israel
  • Pérez-González, José
  • Gallardo-Hernández, Ezequiel Alberto

Abstract

Straight vegetable oils (SVO's) are currently used as renewable sources of fuel in diesel engines for electricity production, transport or agricultural mechanization. Despite various environmental benefits, the use of SVO's may result in shortcomings for the engine operation, in particular, degradation of seals and polymeric components. Thus, deterioration of seals into contact with SVO's in engines must be analyzed to make a safe use of these alternative fuels. In this work, the deterioration of silicone rubber (VMQ), fluoroelastomer/Viton® (FKM), ethylene-propylene-diene monomer (EPDM) and neoprene/chloroprene rubber (CR), upon exposure to straight Jatropha oil (SJO), diesel, and a blend 80% diesel-20% SJO (B20), respectively, was analyzed by immersion tests with measurements of changes in mass, volume, tensile and tear strengths, and hardness. Complementary measurements of changes in viscoelasticity, surface morphology, topography, and chemical composition provided further insight into the understanding of deterioration of the elastomers. Overall, the four elastomers exhibited negligible deterioration with SJO while only FKM exhibited minimal deterioration with diesel and B20. VMQ and FKM were the less deteriorated elastomers by SJO and diesel, respectively. These experimental results were found to be in good agreement with predictions of compatibility based on the use of the Hansen solubility theory.

Suggested Citation

  • Farfan-Cabrera, Leonardo Israel & Pérez-González, José & Gallardo-Hernández, Ezequiel Alberto, 2018. "Deterioration of seals of automotive fuel systems upon exposure to straight Jatropha oil and diesel," Renewable Energy, Elsevier, vol. 127(C), pages 125-133.
    • Handle: RePEc:eee:renene:v:127:y:2018:i:c:p:125-133
    DOI: 10.1016/j.renene.2018.04.048
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148118304567
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2018.04.048?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pramanik, K, 2003. "Properties and use of jatropha curcas oil and diesel fuel blends in compression ignition engine," Renewable Energy, Elsevier, vol. 28(2), pages 239-248.
    2. Akhlaghi, Shahin & Gedde, Ulf W. & Hedenqvist, Mikael S. & Braña, Maria T. Conde & Bellander, Martin, 2015. "Deterioration of automotive rubbers in liquid biofuels: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1238-1248.
    3. Sidibé, S.S. & Blin, J. & Vaitilingom, G. & Azoumah, Y., 2010. "Use of crude filtered vegetable oil as a fuel in diesel engines state of the art: Literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2748-2759, December.
    4. Labeckas, Gvidonas & Slavinskas, Stasys, 2006. "Performance of direct-injection off-road diesel engine on rapeseed oil," Renewable Energy, Elsevier, vol. 31(6), pages 849-863.
    5. Haseeb, A.S.M.A. & Masjuki, H.H. & Siang, C.T. & Fazal, M.A., 2010. "Compatibility of elastomers in palm biodiesel," Renewable Energy, Elsevier, vol. 35(10), pages 2356-2361.
    6. Banapurmath, N.R. & Tewari, P.G. & Hosmath, R.S., 2008. "Performance and emission characteristics of a DI compression ignition engine operated on Honge, Jatropha and sesame oil methyl esters," Renewable Energy, Elsevier, vol. 33(9), pages 1982-1988.
    7. Nwafor, O. M. I. & Rice, G., 1996. "Performance of rapeseed oil blends in a diesel engine," Applied Energy, Elsevier, vol. 54(4), pages 345-354, August.
    8. No, Soo-Young, 2017. "Application of straight vegetable oil from triglyceride based biomass to IC engines – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 80-97.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Nabi, M.N. & Rasul, M.G. & Rahman, S.M.A. & Dowell, Ashley & Ristovski, Z.D. & Brown, R.J., 2019. "Study of performance, combustion and emission characteristics of a common rail diesel engine with tea tree oil-diglyme blends," Energy, Elsevier, vol. 180(C), pages 216-228.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mustafa, K.F. & Abdullah, S. & Abdullah, M.Z. & Sopian, K. & Ismail, A.K., 2015. "Experimental investigation of the performance of a liquid fuel-fired porous burner operating on kerosene-vegetable cooking oil (VCO) blends for micro-cogeneration of thermoelectric power," Renewable Energy, Elsevier, vol. 74(C), pages 505-516.
    2. Sidibé, S.S. & Blin, J. & Vaitilingom, G. & Azoumah, Y., 2010. "Use of crude filtered vegetable oil as a fuel in diesel engines state of the art: Literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2748-2759, December.
    3. Hossain, A.K. & Davies, P.A., 2010. "Plant oils as fuels for compression ignition engines: A technical review and life-cycle analysis," Renewable Energy, Elsevier, vol. 35(1), pages 1-13.
    4. Altarazi, Yazan S.M. & Abu Talib, Abd Rahim & Yu, Jianglong & Gires, Ezanee & Abdul Ghafir, Mohd Fahmi & Lucas, John & Yusaf, Talal, 2022. "Effects of biofuel on engines performance and emission characteristics: A review," Energy, Elsevier, vol. 238(PC).
    5. Russo, D. & Dassisti, M. & Lawlor, V. & Olabi, A.G., 2012. "State of the art of biofuels from pure plant oil," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 4056-4070.
    6. Vallinayagam, R. & Vedharaj, S. & Yang, W.M. & Roberts, W.L. & Dibble, R.W., 2015. "Feasibility of using less viscous and lower cetane (LVLC) fuels in a diesel engine: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1166-1190.
    7. Tatsidjodoung, Parfait & Dabat, Marie-Hélène & Blin, Joël, 2012. "Insights into biofuel development in Burkina Faso: Potential and strategies for sustainable energy policies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5319-5330.
    8. Hazar, Hanbey, 2010. "Cotton methyl ester usage in a diesel engine equipped with insulated combustion chamber," Applied Energy, Elsevier, vol. 87(1), pages 134-140, January.
    9. Jayed, M.H. & Masjuki, H.H. & Saidur, R. & Kalam, M.A. & Jahirul, M.I., 2009. "Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2452-2462, December.
    10. Oumer, A.N. & Hasan, M.M. & Baheta, Aklilu Tesfamichael & Mamat, Rizalman & Abdullah, A.A., 2018. "Bio-based liquid fuels as a source of renewable energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 82-98.
    11. Ceasar, S.A. & Ignacimuthu, S., 2011. "Applications of biotechnology and biochemical engineering for the improvement of Jatropha and Biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 5176-5185.
    12. Atabani, A.E. & Silitonga, A.S. & Ong, H.C. & Mahlia, T.M.I. & Masjuki, H.H. & Badruddin, Irfan Anjum & Fayaz, H., 2013. "Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 211-245.
    13. Ong, H.C. & Mahlia, T.M.I. & Masjuki, H.H. & Norhasyima, R.S., 2011. "Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3501-3515.
    14. Chauhan, Bhupendra Singh & Kumar, Naveen & Du Jun, Yong & Lee, Kum Bae, 2010. "Performance and emission study of preheated Jatropha oil on medium capacity diesel engine," Energy, Elsevier, vol. 35(6), pages 2484-2492.
    15. Subramaniam, D. & Murugesan, A. & Avinash, A. & Kumaravel, A., 2013. "Bio-diesel production and its engine characteristics—An expatiate view," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 361-370.
    16. Chandran, Davannendran, 2020. "Compatibility of diesel engine materials with biodiesel fuel," Renewable Energy, Elsevier, vol. 147(P1), pages 89-99.
    17. No, Soo-Young, 2011. "Inedible vegetable oils and their derivatives for alternative diesel fuels in CI engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 131-149, January.
    18. Basha, Syed Ameer & Gopal, K. Raja & Jebaraj, S., 2009. "A review on biodiesel production, combustion, emissions and performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(6-7), pages 1628-1634, August.
    19. Costa, Michela & Marchitto, Luca & Piazzullo, Daniele & Prati, Maria Vittoria, 2021. "Comparison between the energetic and environmental performance of a combined heat and power unit fueled with diesel and waste vegetable oil: An experimental and numerical study," Renewable Energy, Elsevier, vol. 168(C), pages 791-805.
    20. Hamid, M. Fadzli & Idroas, M. Yusof & Mazlan, M. & Sa'ad, S. & Teoh, Y.H. & Che Mat, S. & Miskam, M.A. & Abdullah, M.K., 2022. "Methods for improving the in-cylinder airflow characteristics for sustainable transportation using fuels with higher viscosity: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:127:y:2018:i:c:p:125-133. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.