IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v77y2013icp13-21.html
   My bibliography  Save this article

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Author

Listed:
  • Corsten, Mariëlle
  • Worrell, Ernst
  • Rouw, Magda
  • van Duin, Armande

Abstract

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO2 emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3MtCO2 annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7MtCO2/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO2 emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.

Suggested Citation

  • Corsten, Mariëlle & Worrell, Ernst & Rouw, Magda & van Duin, Armande, 2013. "The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands," Resources, Conservation & Recycling, Elsevier, vol. 77(C), pages 13-21.
    • Handle: RePEc:eee:recore:v:77:y:2013:i:c:p:13-21
    DOI: 10.1016/j.resconrec.2013.04.002
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344913000888
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2013.04.002?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Woolridge, Anne C. & Ward, Garth D. & Phillips, Paul S. & Collins, Michael & Gandy, Simon, 2006. "Life cycle assessment for reuse/recycling of donated waste textiles compared to use of virgin material: An UK energy saving perspective," Resources, Conservation & Recycling, Elsevier, vol. 46(1), pages 94-103.
    2. Worrell, E. & van Heijningen, R.J.J. & de Castro, J.F.M. & Hazewinkel, J.H.O. & de Beer, J.G. & Faaij, A.P.C. & Vringer, K., 1994. "New gross energy-requirement figures for materials production," Energy, Elsevier, vol. 19(6), pages 627-640.
    3. Allwood, Julian M. & Ashby, Michael F. & Gutowski, Timothy G. & Worrell, Ernst, 2011. "Material efficiency: A white paper," Resources, Conservation & Recycling, Elsevier, vol. 55(3), pages 362-381.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ajayi, Saheed O. & Oyedele, Lukumon O. & Bilal, Muhammad & Akinade, Olugbenga O. & Alaka, Hafiz A. & Owolabi, Hakeem A. & Kadiri, Kabir O., 2015. "Waste effectiveness of the construction industry: Understanding the impediments and requisites for improvements," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 101-112.
    2. Christis, Maarten & Geerken, Theo & Vercalsteren, An & Vrancken, Karl C., 2015. "Value in sustainable materials management strategies for open economies case of Flanders (Belgium)," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 110-124.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    2. Yuancheng Lin & Honghua Yang & Linwei Ma & Zheng Li & Weidou Ni, 2021. "Low-Carbon Development for the Iron and Steel Industry in China and the World: Status Quo, Future Vision, and Key Actions," Sustainability, MDPI, vol. 13(22), pages 1-28, November.
    3. Isaac Lyatuu & Georg Loss & Andrea Farnham & Goodluck W. Lyatuu & Günther Fink & Mirko S. Winkler, 2021. "Associations between Natural Resource Extraction and Incidence of Acute and Chronic Health Conditions: Evidence from Tanzania," IJERPH, MDPI, vol. 18(11), pages 1-12, June.
    4. Mutu Tantrige Osada Vishvajith Peiris & Gileemalege Lalithri Navodya Dayarathne, 2023. "Application of Life Cycle Framework for Municipal Solid Waste Management: a Circular Economy Perspective from Developing Countries," Circular Economy and Sustainability, Springer, vol. 3(2), pages 899-918, June.
    5. Manda, B. M. Krishna & Worrell, Ernst & Patel, Martin K., 2015. "Prospective life cycle assessment of an antibacterial T-shirt and supporting business decisions to create value," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 47-57.
    6. Leonidas Milios, 2021. "Towards a Circular Economy Taxation Framework: Expectations and Challenges of Implementation," Circular Economy and Sustainability, Springer, vol. 1(2), pages 477-498, September.
    7. Dhar, Subash & Pathak, Minal & Shukla, Priyadarshi R., 2020. "Transformation of India's steel and cement industry in a sustainable 1.5 °C world," Energy Policy, Elsevier, vol. 137(C).
    8. Ruth Lane, 2014. "Understanding the Dynamic Character of Value in Recycling Metals from Australia," Resources, MDPI, vol. 3(2), pages 1-16, April.
    9. Mariale Moreno & Carolina De los Rios & Zoe Rowe & Fiona Charnley, 2016. "A Conceptual Framework for Circular Design," Sustainability, MDPI, vol. 8(9), pages 1-15, September.
    10. Colin M. Rose & Julia A. Stegemann, 2018. "From Waste Management to Component Management in the Construction Industry," Sustainability, MDPI, vol. 10(1), pages 1-21, January.
    11. Ardente, Fulvio & Mathieux, Fabrice & Recchioni, Marco, 2014. "Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 158-171.
    12. Yaolin Wang & Chenyang Liu & Xi Zhang & Shaoting Zeng, 2023. "Research on Sustainable Furniture Design Based on Waste Textiles Recycling," Sustainability, MDPI, vol. 15(4), pages 1-18, February.
    13. Magee, Christopher L. & Devezas, Tessaleno C., 2017. "A simple extension of dematerialization theory: Incorporation of technical progress and the rebound effect," Technological Forecasting and Social Change, Elsevier, vol. 117(C), pages 196-205.
    14. Ke, Jing & Price, Lynn & McNeil, Michael & Khanna, Nina Zheng & Zhou, Nan, 2013. "Analysis and practices of energy benchmarking for industry from the perspective of systems engineering," Energy, Elsevier, vol. 54(C), pages 32-44.
    15. Chembessi Chedrak & Gohoungodji Paulin & Juste Rajaonson, 2023. "“A fine wine, better with age”: Circular economy historical roots and influential publications: A bibliometric analysis using Reference Publication Year Spectroscopy (RPYS)," Journal of Industrial Ecology, Yale University, vol. 27(6), pages 1593-1612, December.
    16. Pérez-Sánchez, Laura À. & Velasco-Fernández, Raúl & Giampietro, Mario, 2022. "Factors and actions for the sustainability of the residential sector. The nexus of energy, materials, space, and time use," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    17. Yingying Lu & Heinz Schandl, 2021. "Do sectoral material efficiency improvements add up to greenhouse gas emissions reduction on an economy‐wide level?," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 523-536, April.
    18. Stoppato, A., 2008. "Life cycle assessment of photovoltaic electricity generation," Energy, Elsevier, vol. 33(2), pages 224-232.
    19. Henning Wigger & Till Zimmermann & Christian Pade, 2015. "Broadening our view on nanomaterials: highlighting potentials to contribute to a sustainable materials management in preliminary assessments," Environment Systems and Decisions, Springer, vol. 35(1), pages 110-128, March.
    20. Dunant, Cyrille F. & Drewniok, Michał P. & Sansom, Michael & Corbey, Simon & Allwood, Julian M. & Cullen, Jonathan M., 2017. "Real and perceived barriers to steel reuse across the UK construction value chain," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 118-131.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:77:y:2013:i:c:p:13-21. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.