IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v136y2012i2p366-377.html
   My bibliography  Save this article

Impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations

Author

Listed:
  • Nativi, Juan Jose
  • Lee, Seokcheon

Abstract

The integration of environmental practices in a supply chain has been study for the past few decades. However, most of the work relies on centralized decisions made by one player. Few papers address the complex dynamics of environmental decentralized supply chains and how these dynamics can affect environmental and economic outcomes. To study this problem, we consider a supply chain with a manufacturer and two different suppliers: a recycled-material and a raw-material supplier. The players make individual inventory decisions to satisfy demand and reduce cost. Further, this supply chain encompasses stochastic elements such as in demands, returns, and collection leadtimes. These decentralized decisions and random factors can cause underperforming results; therefore, new inventory models and technologies are needed to help companies increase coordination within these systems. We model the implementation of Radio Frequency Identification (RFID) in the supply chain to determine if real-time inventory monitoring and information sharing can help the system attain higher environmental benefits (more returns) and higher economic benefits (less cost). We study two scenarios through a simulation-based analysis: No RFID and RFID. Numerical studies show that environmental benefits are significantly increased with the attainment of more returns. However, although economic benefits are realized, they are less significant than the environmental benefits. Further regression and sensitivity analyses on the cost performance measures reveal that economic benefits depend on several drivers inside the system. We present managerial insights that illustrate what configurations within this complex system can lead to the achieving of environmental as well as economic benefits.

Suggested Citation

  • Nativi, Juan Jose & Lee, Seokcheon, 2012. "Impact of RFID information-sharing strategies on a decentralized supply chain with reverse logistics operations," International Journal of Production Economics, Elsevier, vol. 136(2), pages 366-377.
  • Handle: RePEc:eee:proeco:v:136:y:2012:i:2:p:366-377
    DOI: 10.1016/j.ijpe.2011.12.024
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527311005408
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ijpe.2011.12.024?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Inderfurth, Karl & van der Laan, Erwin, 2001. "Leadtime effects and policy improvement for stochastic inventory control with remanufacturing," International Journal of Production Economics, Elsevier, vol. 71(1-3), pages 381-390, May.
    2. R Teunter & E van der Laan & D Vlachos, 2004. "Inventory strategies for systems with fast remanufacturing," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 55(5), pages 475-484, May.
    3. Erwin van der Laan & Marc Salomon & Rommert Dekker & Luk Van Wassenhove, 1999. "Inventory Control in Hybrid Systems with Remanufacturing," Management Science, INFORMS, vol. 45(5), pages 733-747, May.
    4. Charles H. Fine & Evan L. Porteus, 1989. "Dynamic Process Improvement," Operations Research, INFORMS, vol. 37(4), pages 580-591, August.
    5. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    6. Gila E. Fruchter & Shlomo Kalish, 1997. "Closed-Loop Advertising Strategies in a Duopoly," Management Science, INFORMS, vol. 43(1), pages 54-63, January.
    7. Hao Zhao, 2000. "Raising Awareness and Signaling Quality to Uninformed Consumers: A Price-Advertising Model," Marketing Science, INFORMS, vol. 19(4), pages 390-396, January.
    8. Szmerekovsky, Joseph G. & Zhang, Jiang, 2008. "Coordination and adoption of item-level RFID with vendor managed inventory," International Journal of Production Economics, Elsevier, vol. 114(1), pages 388-398, July.
    9. Bottani, Eleonora & Rizzi, Antonio, 2008. "Economical assessment of the impact of RFID technology and EPC system on the fast-moving consumer goods supply chain," International Journal of Production Economics, Elsevier, vol. 112(2), pages 548-569, April.
    10. Evan L. Porteus, 1986. "Optimal Lot Sizing, Process Quality Improvement and Setup Cost Reduction," Operations Research, INFORMS, vol. 34(1), pages 137-144, February.
    11. Lee, In & Lee, Byoung-Chan, 2010. "An investment evaluation of supply chain RFID technologies: A normative modeling approach," International Journal of Production Economics, Elsevier, vol. 125(2), pages 313-323, June.
    12. Sarac, Aysegul & Absi, Nabil & Dauzère-Pérès, Stéphane, 2010. "A literature review on the impact of RFID technologies on supply chain management," International Journal of Production Economics, Elsevier, vol. 128(1), pages 77-95, November.
    13. Vincent P. Simpson, 1978. "Optimum Solution Structure for a Repairable Inventory Problem," Operations Research, INFORMS, vol. 26(2), pages 270-281, April.
    14. van der Laan, Erwin & Salomon, Marc & Dekker, Rommert, 1999. "An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies," European Journal of Operational Research, Elsevier, vol. 115(1), pages 195-214, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ahmed Musa & Al-Amin Abba Dabo, 2016. "A Review of RFID in Supply Chain Management: 2000–2015," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 17(2), pages 189-228, June.
    2. Saxena, Neha & Sarkar, Biswajit, 2023. "How does the retailing industry decide the best replenishment strategy by utilizing technological support through blockchain?," Journal of Retailing and Consumer Services, Elsevier, vol. 71(C).
    3. Wang, Hui & Gong, Qiguo & Wang, Shouyang, 2017. "Information processing structures and decision making delays in MRP and JIT," International Journal of Production Economics, Elsevier, vol. 188(C), pages 41-49.
    4. Dev, Navin K. & Shankar, Ravi & Swami, Sanjeev, 2020. "Diffusion of green products in industry 4.0: Reverse logistics issues during design of inventory and production planning system," International Journal of Production Economics, Elsevier, vol. 223(C).
    5. Lina Tang & Taho Yang & Yiliu Tu & Yizhong Ma, 2021. "Supply chain information sharing under consideration of bullwhip effect and system robustness," Flexible Services and Manufacturing Journal, Springer, vol. 33(2), pages 337-380, June.
    6. Volker Frehe & Frank Teuteberg, 2017. "Information and communication technology in green logistics: status quo and research gaps," Management Review Quarterly, Springer, vol. 67(2), pages 65-96, April.
    7. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    8. Pablo Becerra & Josefa Mula & Raquel Sanchis, 2022. "Sustainable Inventory Management in Supply Chains: Trends and Further Research," Sustainability, MDPI, vol. 14(5), pages 1-19, February.
    9. Mehr Sadat Salami & Mohammadreza Eslamipirharati & Alireza Bakhshi & Amir Aghsami & Fariborz Jolai & Maziar Yazdani, 2022. "Does a Buyback Contract Coordinate a Reverse Supply Chain Facing Remanufacturing Capacity Disruption and Returned Product Quality Uncertainty?," Sustainability, MDPI, vol. 14(23), pages 1-20, November.
    10. Simonetto, Marco & Sgarbossa, Fabio & Battini, Daria & Govindan, Kannan, 2022. "Closed loop supply chains 4.0: From risks to benefits through advanced technologies. A literature review and research agenda," International Journal of Production Economics, Elsevier, vol. 253(C).
    11. Zhitao Xu & Adel Elomri & Roberto Baldacci & Laoucine Kerbache & Zhenyong Wu, 2024. "Frontiers and trends of supply chain optimization in the age of industry 4.0: an operations research perspective," Annals of Operations Research, Springer, vol. 338(2), pages 1359-1401, July.
    12. Jasmina Žic & Samir Žic & Goran Đukić & Svetlana Dabić-Miletić, 2024. "Exploring Green Inventory Management through Periodic Review Inventory Systems—A Comprehensive Literature Review and Directions for Future Research," Sustainability, MDPI, vol. 16(13), pages 1-17, June.
    13. Ilkka Ritola & Harold Krikke & Marjolein C.J. Caniëls, 2020. "Learning from Returned Products in a Closed Loop Supply Chain: A Systematic Literature Review," Logistics, MDPI, vol. 4(2), pages 1-13, April.
    14. Green, Kenneth W. & Inman, R.Anthony & Birou, Laura M. & Whitten, Dwayne, 2014. "Total JIT (T-JIT) and its impact on supply chain competency and organizational performance," International Journal of Production Economics, Elsevier, vol. 147(PA), pages 125-135.
    15. Heydari, Jafar & Govindan, Kannan & Sadeghi, Razieh, 2018. "Reverse supply chain coordination under stochastic remanufacturing capacity," International Journal of Production Economics, Elsevier, vol. 202(C), pages 1-11.
    16. Zhong, Ray Y. & Huang, George Q. & Lan, Shulin & Dai, Q.Y. & Chen, Xu & Zhang, T., 2015. "A big data approach for logistics trajectory discovery from RFID-enabled production data," International Journal of Production Economics, Elsevier, vol. 165(C), pages 260-272.
    17. Juan Pedro Sepúlveda-Rojas & Rodrigo Ternero, 2020. "Analysis of the Value of Information and Coordination in a Dyadic Closed Loop Supply Chain," Sustainability, MDPI, vol. 12(20), pages 1-18, October.
    18. Jairo R. Montoya-Torres & Diego A. Ortiz-Vargas, 2014. "Collaboration and information sharing in dyadic supply chains: A literature review over the period 2000–2012," Estudios Gerenciales, Universidad Icesi, November.
    19. Agata Mesjasz-Lech, 2016. "Changes in the Use of ERP Systems Supporting Enterprise Logistics in Poland – Sectoral Analysis," Proceedings- 11th International Conference on Mangement, Enterprise and Benchmarking (MEB 2016),, Óbuda University, Keleti Faculty of Business and Management.
    20. Lui, Ariel K.H. & Lo, Chris K.Y. & Ngai, Eric W.T., 2019. "Does mandated RFID affect firm risk? The moderating role of top management team heterogeneity," International Journal of Production Economics, Elsevier, vol. 210(C), pages 84-96.
    21. Chen, Yi-Ting & Sun, Edward W. & Chang, Ming-Feng & Lin, Yi-Bing, 2021. "Pragmatic real-time logistics management with traffic IoT infrastructure: Big data predictive analytics of freight travel time for Logistics 4.0," International Journal of Production Economics, Elsevier, vol. 238(C).
    22. Alqahtani, Ammar Y. & Gupta, Surendra M. & Nakashima, Kenichi, 2019. "Warranty and maintenance analysis of sensor embedded products using internet of things in industry 4.0," International Journal of Production Economics, Elsevier, vol. 208(C), pages 483-499.
    23. Tarun Kumar Agrawal & Rudrajeet Pal, 2019. "Traceability in Textile and Clothing Supply Chains: Classifying Implementation Factors and Information Sets via Delphi Study," Sustainability, MDPI, vol. 11(6), pages 1-18, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zheng, Yanyan & Zhao, Yingxue & Wang, Nengmin & Meng, Xiaoge & Yang, Honglin, 2022. "Financing decision for a remanufacturing supply chain with a capital constrained retailer: A study from the perspective of market uncertainty," International Journal of Production Economics, Elsevier, vol. 245(C).
    2. Ahiska, S. Sebnem & King, Russell E., 2010. "Life cycle inventory policy characterizations for a single-product recoverable system," International Journal of Production Economics, Elsevier, vol. 124(1), pages 51-61, March.
    3. Ponte, Borja & Cannella, Salvatore & Dominguez, Roberto & Naim, Mohamed M. & Syntetos, Aris A., 2021. "Quality grading of returns and the dynamics of remanufacturing," International Journal of Production Economics, Elsevier, vol. 236(C).
    4. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    5. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    6. Kim, Eungab & Saghafian, Soroush & Van Oyen, Mark P., 2013. "Joint control of production, remanufacturing, and disposal activities in a hybrid manufacturing–remanufacturing system," European Journal of Operational Research, Elsevier, vol. 231(2), pages 337-348.
    7. de Brito, Marisa P. & Dekker, Rommert, 2003. "Modelling product returns in inventory control--exploring the validity of general assumptions," International Journal of Production Economics, Elsevier, vol. 81(1), pages 225-241, January.
    8. Corbacioglu, Umut & van der Laan, Erwin A., 2007. "Setting the holding cost rates in a two-product system with remanufacturing," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 185-194, September.
    9. Cai, Xiaoqiang & Lai, Minghui & Li, Xiang & Li, Yongjian & Wu, Xianyi, 2014. "Optimal acquisition and production policy in a hybrid manufacturing/remanufacturing system with core acquisition at different quality levels," European Journal of Operational Research, Elsevier, vol. 233(2), pages 374-382.
    10. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    11. Poles, Roberto, 2013. "System Dynamics modelling of a production and inventory system for remanufacturing to evaluate system improvement strategies," International Journal of Production Economics, Elsevier, vol. 144(1), pages 189-199.
    12. Chen, Jen-Ming & Chang, Chia-I, 2012. "The co-opetitive strategy of a closed-loop supply chain with remanufacturing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(2), pages 387-400.
    13. Zhiqiao Wu & C.K. Kwong & C.K.M. Lee & Jiafu Tang, 2016. "Joint decision of product configuration and remanufacturing for product family design," International Journal of Production Research, Taylor & Francis Journals, vol. 54(15), pages 4689-4702, August.
    14. Svetlana Nikolicic & Milorad Kilibarda & Marinko Maslaric & Dejan Mircetic & Sanja Bojic, 2021. "Reducing Food Waste in the Retail Supply Chains by Improving Efficiency of Logistics Operations," Sustainability, MDPI, vol. 13(12), pages 1-24, June.
    15. van der Laan, Erwin A. & Teunter, Ruud H., 2006. "Simple heuristics for push and pull remanufacturing policies," European Journal of Operational Research, Elsevier, vol. 175(2), pages 1084-1102, December.
    16. Jian Yang & Boaz Golany & Gang Yu, 2005. "A concave‐cost production planning problem with remanufacturing options," Naval Research Logistics (NRL), John Wiley & Sons, vol. 52(5), pages 443-458, August.
    17. Hosoda, Takamichi & Disney, Stephen M. & Gavirneni, Srinagesh, 2015. "The impact of information sharing, random yield, correlation, and lead times in closed loop supply chains," European Journal of Operational Research, Elsevier, vol. 246(3), pages 827-836.
    18. Lui, Ariel K.H. & Lo, Chris K.Y. & Ngai, Eric W.T., 2019. "Does mandated RFID affect firm risk? The moderating role of top management team heterogeneity," International Journal of Production Economics, Elsevier, vol. 210(C), pages 84-96.
    19. Kiesmuller, G. P., 2003. "A new approach for controlling a hybrid stochastic manufacturing/remanufacturing system with inventories and different leadtimes," European Journal of Operational Research, Elsevier, vol. 147(1), pages 62-71, May.
    20. Z P Bayındır & N Erkip & R Güllü, 2005. "Assessing the benefits of remanufacturing option under one-way substitution," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 56(3), pages 286-296, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:136:y:2012:i:2:p:366-377. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.