IDEAS home Printed from https://ideas.repec.org/a/eee/jomega/v24y1996i6p615-629.html
   My bibliography  Save this article

An environmental life cycle optimization model for the European pulp and paper industry

Author

Listed:
  • Bloemhof-Ruwaard, J. M.
  • Van Wassenhove, L. N.
  • Gabel, H. L.
  • Weaver, P. M.

Abstract

Will paper recycling reduce the environmental impact of the European pulp and paper sector? If so, is maximal paper recycling the best policy to optimize the life cycle of the pulp and paper sector? We explore these questions using an approach that combines materials accounting methods and optimization techniques. Environmental impact data are inputs for a linear programming network flow model to find optimal configurations for the sector. These configurations consist of a mix of different pulping technologies, a geographical distribution of pulp and paper production, and a level of recycling consistent with the lowest environmental impacts. We use the model to analyse scenarios with different recycling strategies. Recycling offers a reduction in environmental impact in regions with a high population and a large production of paper and board products. Regions with a large production of graphic products should focus on cleaner virgin pulp production with energy recovery. We conclude that relocation of paper production also offers a reduction in environmental impact. However, the severe effects on the economy make this policy less attractive than a combination of recycling, cleaner pulp production and energy recovery.

Suggested Citation

  • Bloemhof-Ruwaard, J. M. & Van Wassenhove, L. N. & Gabel, H. L. & Weaver, P. M., 1996. "An environmental life cycle optimization model for the European pulp and paper industry," Omega, Elsevier, vol. 24(6), pages 615-629, December.
    • Handle: RePEc:eee:jomega:v:24:y:1996:i:6:p:615-629
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0305-0483(96)00026-6
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Paul Weaver & H. Gabel & Jacqueline Bloemhof-Ruwaard & Luk Wassenhove, 1997. "Optimizing environmental product life cycles," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 9(2), pages 199-224, March.
    2. Chinneck, J. W. & Moll, R. H. H., 1995. "Processing network models for forest management," Omega, Elsevier, vol. 23(5), pages 499-510, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Quariguasi Frota Neto, J. & Walther, G. & Bloemhof, J. & van Nunen, J.A.E.E. & Spengler, T., 2009. "A methodology for assessing eco-efficiency in logistics networks," European Journal of Operational Research, Elsevier, vol. 193(3), pages 670-682, March.
    2. Pati, Rupesh Kumar & Vrat, Prem & Kumar, Pradeep, 2006. "Economic analysis of paper recycling vis-a-vis wood as raw material," International Journal of Production Economics, Elsevier, vol. 103(2), pages 489-508, October.
    3. Ramin Sahamie & Dennis Stindt & Christian Nuss, 2013. "Transdisciplinary Research in Sustainable Operations – An Application to Closed‐Loop Supply Chains," Business Strategy and the Environment, Wiley Blackwell, vol. 22(4), pages 245-268, May.
    4. Michael W. Toffel & Antoinette Stein & Katharine L. Lee, 2008. "Extending Producer Responsibility: An Evaluation Framework for Product Take-Back Policies," Harvard Business School Working Papers 09-026, Harvard Business School.
    5. Jena, Sarat Kumar & Sarmah, S.P., 2016. "Price and service co-opetiton under uncertain demand and condition of used items in a remanufacturing system," International Journal of Production Economics, Elsevier, vol. 173(C), pages 1-21.
    6. Krikke, H.R. & Zuidwijk, R., 2008. "Disposition Choices Based on Energy Footprints instead of Recovery Quota," Other publications TiSEM e8654e2a-9cf2-4d88-aa83-2, Tilburg University, School of Economics and Management.
    7. Martí, Joana M. Comas & Tancrez, Jean-Sébastien & Seifert, Ralf W., 2015. "Carbon footprint and responsiveness trade-offs in supply chain network design," International Journal of Production Economics, Elsevier, vol. 166(C), pages 129-142.
    8. Frota Neto, J. Quariguasi & Bloemhof-Ruwaard, J.M. & van Nunen, J.A.E.E. & van Heck, E., 2008. "Designing and evaluating sustainable logistics networks," International Journal of Production Economics, Elsevier, vol. 111(2), pages 195-208, February.
    9. Bloemhof-Ruwaard, J.M. & van Nunen, J.A.E.E. & Vroom, J. & van der Linden, A., 2001. "One and Two Way Packaging in the Dairy Sector," ERIM Report Series Research in Management ERS-2001-58-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    10. Harris, Irina & Mumford, Christine L. & Naim, Mohamed M., 2014. "A hybrid multi-objective approach to capacitated facility location with flexible store allocation for green logistics modeling," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 66(C), pages 1-22.
    11. Zhou, Xiaoguang & Zhou, Yanhui, 2015. "Designing a multi-echelon reverse logistics operation and network: A case study of office paper in Beijing," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 58-69.
    12. Hong, Paul & Jagani, Sandeep & Kim, Jinhwan & Youn, Sun Hee, 2019. "Managing sustainability orientation: An empirical investigation of manufacturing firms," International Journal of Production Economics, Elsevier, vol. 211(C), pages 71-81.
    13. Tognetti, Alice & Grosse-Ruyken, Pan Theo & Wagner, Stephan M., 2015. "Green supply chain network optimization and the trade-off between environmental and economic objectives," International Journal of Production Economics, Elsevier, vol. 170(PB), pages 385-392.
    14. Jianxiong Chen & Chung-Cheng Yang, 2021. "Competitive Revenue Strategies in the Medical Consumables Industry: Evidence from Human Resources, Research and Development Expenses and Industry Life Cycle," IJERPH, MDPI, vol. 18(6), pages 1-20, March.
    15. Rudberg, Martin & Waldemarsson, Martin & Lidestam, Helene, 2013. "Strategic perspectives on energy management: A case study in the process industry," Applied Energy, Elsevier, vol. 104(C), pages 487-496.
    16. A.J.D. Lambert & H.M. Boelaarts & M.A.M. Splinter, 2004. "Optimal Recycling System Design: With an Application to Sophisticated Packaging Tools," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 28(3), pages 273-299, July.
    17. Francis M Vanek, 2000. "The Transportation – Production Tradeoff in the Regional Environmental Impact of Industrial Systems: A Case Study in the Paper Sector," Environment and Planning A, , vol. 32(5), pages 817-832, May.
    18. Eskandarpour, Majid & Dejax, Pierre & Miemczyk, Joe & Péton, Olivier, 2015. "Sustainable supply chain network design: An optimization-oriented review," Omega, Elsevier, vol. 54(C), pages 11-32.
    19. Zoeteman, B.C.J. & Krikke, H.R. & Venselaar, J., 2010. "Handling WEEE waste flows : On the effectiveness of producer responsibility in a globalizing world," Other publications TiSEM cb6af1f5-e6b7-4cea-953e-1, Tilburg University, School of Economics and Management.
    20. Krikke, H.R. & Zuidwijk, R., 2008. "Disposition Choices Based on Energy Footprints instead of Recovery Quota," Discussion Paper 2008-74, Tilburg University, Center for Economic Research.
    21. Ioannis E. Nikolaou & Konstantinos I. Evangelinos, 2010. "Classifying current social responsibility accounting methods for assisting a dialogue between business and society," Social Responsibility Journal, Emerald Group Publishing Limited, vol. 6(4), pages 562-580, October.
    22. Xu, Jiuping & Li, Zongmin, 2012. "A review on Ecological Engineering based Engineering Management," Omega, Elsevier, vol. 40(3), pages 368-378.
    23. V. Daniel R. Guide & Luk N. Van Wassenhove, 2009. "OR FORUM---The Evolution of Closed-Loop Supply Chain Research," Operations Research, INFORMS, vol. 57(1), pages 10-18, February.
    24. Gamberini, Rita & Gebennini, Elisa & Manzini, Riccardo & Ziveri, Andrea, 2010. "On the integration of planning and environmental impact assessment for a WEEE transportation network—A case study," Resources, Conservation & Recycling, Elsevier, vol. 54(11), pages 937-951.
    25. Ioannis Nikolaou & Konstantinos Evangelinos, 2012. "Financial and non-financial environmental information: significant factors for corporate environmental performance measuring," International Journal of Managerial and Financial Accounting, Inderscience Enterprises Ltd, vol. 4(1), pages 61-77.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Frota Neto, J. Quariguasi & Bloemhof-Ruwaard, J.M. & van Nunen, J.A.E.E. & van Heck, E., 2008. "Designing and evaluating sustainable logistics networks," International Journal of Production Economics, Elsevier, vol. 111(2), pages 195-208, February.
    2. Hervani, Aref A., 2005. "Can oligopsony power be measured? The case of U.S. old newspapers market," Resources, Conservation & Recycling, Elsevier, vol. 44(4), pages 343-380.
    3. Umetani, Shunji & Fukushima, Yuta & Morita, Hiroshi, 2017. "A linear programming based heuristic algorithm for charge and discharge scheduling of electric vehicles in a building energy management system," Omega, Elsevier, vol. 67(C), pages 115-122.
    4. Baselli, Gianluca & Contreras, Felipe & Lillo, Matías & Marín, Magdalena & Carrasco, Rodrigo A., 2020. "Optimal decisions for salvage logging after wildfires," Omega, Elsevier, vol. 96(C).
    5. van Beukering, Pieter J. H. & Bouman, Mathijs N., 2001. "Empirical Evidence on Recycling and Trade of Paper and Lead in Developed and Developing Countries," World Development, Elsevier, vol. 29(10), pages 1717-1737, October.
    6. Anni Huhtala & Eva Samakovlis, 2002. "Does International Harmonization of Environmental Policy Instruments Make Economic Sense?," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 21(3), pages 259-284, March.
    7. Skorin-Kapov, Nina & Mesarić, Luka & García, Fernando Pereñíguez & Skorin-Kapov, Lea, 2024. "Scheduling aerial resource operations for the extinction of large-scale wildfires," Omega, Elsevier, vol. 122(C).
    8. Patricia Kandelaars & Jeroen Bergh, 1996. "Materials-product chains: Theory and an application to zinc and PVC gutters," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 8(1), pages 97-118, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:jomega:v:24:y:1996:i:6:p:615-629. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/375/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.