IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v55y2013icp114-126.html
   My bibliography  Save this article

Composition optimisation of working fluids for Organic Rankine Cycles and Kalina cycles

Author

Listed:
  • Victor, Rachel Anne
  • Kim, Jin-Kuk
  • Smith, Robin

Abstract

An optimisation model for the composition of mixed working fluids for (Organic Rankine Cycles) ORCs and Kalina cycles has been developed. The temperatures investigated were 100 °C–250 °C for the heat source and 30 °C for the heat sink. The optimisation method of the composition was carried out with Simulated Annealing technique with the objective function of maximising the thermal efficiency of the cycle, based on 1 MW of heat source. The results show that the pure component organic fluids are more energy-efficient than mixed organic fluids. The selection of organic working fluids was studied for achieving maximum cycle efficiency at a given operating temperature. The composition of the Kalina cycle was also optimised and it was found that for a maximum temperature of 250 °C, the minimum ammonia concentration in the ammonia–water mixture was 73.8% mol fraction. A novel consideration of employing alcohol–water mixtures in the cycle was also investigated and the most efficient mixture at 250 °C was methanol and water mixture when compared to the Kalina cycle and steam Rankine Cycle. The study showed overall that the optimal choice of working fluids for a particular type of cycle would depend on the operating temperature and pressure. The developed design method can be useful for engineers to evaluate the performance of the cycles considering a wide range of working fluids, and determines the optimal choice of working fluids and operating conditions of the cycle.

Suggested Citation

  • Victor, Rachel Anne & Kim, Jin-Kuk & Smith, Robin, 2013. "Composition optimisation of working fluids for Organic Rankine Cycles and Kalina cycles," Energy, Elsevier, vol. 55(C), pages 114-126.
    • Handle: RePEc:eee:energy:v:55:y:2013:i:c:p:114-126
    DOI: 10.1016/j.energy.2013.03.069
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421300265X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.03.069?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ibrahim, Mounir B. & Kovach, Ronald M., 1993. "A Kalina cycle application for power generation," Energy, Elsevier, vol. 18(9), pages 961-969.
    2. Peng, Shuo & Hong, Hui & Jin, Hongguang & Wang, Zhifeng, 2012. "An integrated solar thermal power system using intercooled gas turbine and Kalina cycle," Energy, Elsevier, vol. 44(1), pages 732-740.
    3. Bénédicte Vidaillet & V. d'Estaintot & P. Abécassis, 2005. "Introduction," Post-Print hal-00287137, HAL.
    4. Badr, O. & Probert, S.D. & O'Callaghan, P.W., 1985. "Selecting a working fluid for a Rankine-cycle engine," Applied Energy, Elsevier, vol. 21(1), pages 1-42.
    5. Saleh, Bahaa & Koglbauer, Gerald & Wendland, Martin & Fischer, Johann, 2007. "Working fluids for low-temperature organic Rankine cycles," Energy, Elsevier, vol. 32(7), pages 1210-1221.
    6. Zhang, Xinxin & He, Maogang & Zhang, Ying, 2012. "A review of research on the Kalina cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5309-5318.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bao, Junjiang & Zhao, Li, 2012. "Exergy analysis and parameter study on a novel auto-cascade Rankine cycle," Energy, Elsevier, vol. 48(1), pages 539-547.
    2. Zhu, Zilong & Zhang, Zhi & Chen, Yaping & Wu, Jiafeng, 2016. "Parameter optimization of dual-pressure vaporization Kalina cycle with second evaporator parallel to economizer," Energy, Elsevier, vol. 112(C), pages 420-429.
    3. Le, Van Long & Feidt, Michel & Kheiri, Abdelhamid & Pelloux-Prayer, Sandrine, 2014. "Performance optimization of low-temperature power generation by supercritical ORCs (organic Rankine cycles) using low GWP (global warming potential) working fluids," Energy, Elsevier, vol. 67(C), pages 513-526.
    4. Larsen, Ulrik & Pierobon, Leonardo & Haglind, Fredrik & Gabrielii, Cecilia, 2013. "Design and optimisation of organic Rankine cycles for waste heat recovery in marine applications using the principles of natural selection," Energy, Elsevier, vol. 55(C), pages 803-812.
    5. Vélez, Fredy & Segovia, José J. & Martín, M. Carmen & Antolín, Gregorio & Chejne, Farid & Quijano, Ana, 2012. "A technical, economical and market review of organic Rankine cycles for the conversion of low-grade heat for power generation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 4175-4189.
    6. Huster, Wolfgang R. & Schweidtmann, Artur M. & Mitsos, Alexander, 2020. "Globally optimal working fluid mixture composition for geothermal power cycles," Energy, Elsevier, vol. 212(C).
    7. Wang, Jiangfeng & Yan, Zhequan & Wang, Man & Dai, Yiping, 2013. "Thermodynamic analysis and optimization of an ammonia-water power system with LNG (liquefied natural gas) as its heat sink," Energy, Elsevier, vol. 50(C), pages 513-522.
    8. Lecompte, S. & Huisseune, H. & van den Broek, M. & De Schampheleire, S. & De Paepe, M., 2013. "Part load based thermo-economic optimization of the Organic Rankine Cycle (ORC) applied to a combined heat and power (CHP) system," Applied Energy, Elsevier, vol. 111(C), pages 871-881.
    9. Pezzuolo, Alex & Benato, Alberto & Stoppato, Anna & Mirandola, Alberto, 2016. "The ORC-PD: A versatile tool for fluid selection and Organic Rankine Cycle unit design," Energy, Elsevier, vol. 102(C), pages 605-620.
    10. Eyidogan, Muharrem & Canka Kilic, Fatma & Kaya, Durmus & Coban, Volkan & Cagman, Selman, 2016. "Investigation of Organic Rankine Cycle (ORC) technologies in Turkey from the technical and economic point of view," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 885-895.
    11. Meftahpour, Haleh & Saray, Rahim Khoshbakhti & Aghaei, Ali Tavakkol & Bahlouli, Keyvan, 2024. "Comprehensive analysis of energy, exergy, economic, and environmental aspects in implementing the Kalina cycle for waste heat recovery from a gas turbine cycle coupled with a steam generator," Energy, Elsevier, vol. 290(C).
    12. Khatita, Mohammed A. & Ahmed, Tamer S. & Ashour, Fatma. H. & Ismail, Ibrahim M., 2014. "Power generation using waste heat recovery by organic Rankine cycle in oil and gas sector in Egypt: A case study," Energy, Elsevier, vol. 64(C), pages 462-472.
    13. Oyewunmi, Oyeniyi A. & Kirmse, Christoph J.W. & Haslam, Andrew J. & Müller, Erich A. & Markides, Christos N., 2017. "Working-fluid selection and performance investigation of a two-phase single-reciprocating-piston heat-conversion engine," Applied Energy, Elsevier, vol. 186(P3), pages 376-395.
    14. Oluleye, Gbemi & Jobson, Megan & Smith, Robin & Perry, Simon J., 2016. "Evaluating the potential of process sites for waste heat recovery," Applied Energy, Elsevier, vol. 161(C), pages 627-646.
    15. Shalaby, S.M., 2017. "Reverse osmosis desalination powered by photovoltaic and solar Rankine cycle power systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 789-797.
    16. Steven Lecompte & Oyeniyi A. Oyewunmi & Christos N. Markides & Marija Lazova & Alihan Kaya & Martijn Van den Broek & Michel De Paepe, 2017. "Case Study of an Organic Rankine Cycle (ORC) for Waste Heat Recovery from an Electric Arc Furnace (EAF)," Energies, MDPI, vol. 10(5), pages 1-16, May.
    17. Kuo, Chi-Ron & Hsu, Sung-Wei & Chang, Kai-Han & Wang, Chi-Chuan, 2011. "Analysis of a 50kW organic Rankine cycle system," Energy, Elsevier, vol. 36(10), pages 5877-5885.
    18. Ibarra, Mercedes & Rovira, Antonio & Alarcón-Padilla, Diego-César & Blanco, Julián, 2014. "Performance of a 5kWe Organic Rankine Cycle at part-load operation," Applied Energy, Elsevier, vol. 120(C), pages 147-158.
    19. Macián, V. & Serrano, J.R. & Dolz, V. & Sánchez, J., 2013. "Methodology to design a bottoming Rankine cycle, as a waste energy recovering system in vehicles. Study in a HDD engine," Applied Energy, Elsevier, vol. 104(C), pages 758-771.
    20. Markides, Christos N. & Solanki, Roochi & Galindo, Amparo, 2014. "Working fluid selection for a two-phase thermofluidic oscillator: Effect of thermodynamic properties," Applied Energy, Elsevier, vol. 124(C), pages 167-185.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:55:y:2013:i:c:p:114-126. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.