IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i11p6583-6595.html
   My bibliography  Save this article

Impact of injection conditions on flame characteristics from a parallel multi-jet burner

Author

Listed:
  • Mi, Jianchun
  • Li, Pengfei
  • Zheng, Chuguang

Abstract

This numerical study systematically investigates the influence of initial injection conditions of reactants on flame characteristics from a parallel multi-jet burner in a laboratory-scale furnace. In particular, varying characteristics from visible flame to invisible Moderate or Intense Low-oxygen Dilution (MILD) combustion is explored. Different parameters examined include the initial separation of fuel and air streams (S), air nozzle diameter (Da), fuel nozzle diameter (Df), and air preheat temperature (Ta). The present simulations agree qualitatively well with previous measurements reported elsewhere for two reference cases investigated by experiment. A number of new and significant findings are then deduced from the simulations. For instance, all S, Da and Df are found to play significant roles in achieving a proper confluence location of air and fuel jets for establishing the MILD combustion. Particularly, varying Da is most effective for controlling the combustion characteristics. It is also found that the stability limits of the non-premixed MILD combustion varies with different combustor systems and inlet reactant properties. Moreover, for the first time, several analytical approximations are obtained that relate the flue-gas recirculation rate and the fuel-jet penetration to Da, Df, S and also reactant properties.

Suggested Citation

  • Mi, Jianchun & Li, Pengfei & Zheng, Chuguang, 2011. "Impact of injection conditions on flame characteristics from a parallel multi-jet burner," Energy, Elsevier, vol. 36(11), pages 6583-6595.
  • Handle: RePEc:eee:energy:v:36:y:2011:i:11:p:6583-6595
    DOI: 10.1016/j.energy.2011.09.003
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211006001
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2011.09.003?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Schaffel-Mancini, Natalia & Mancini, Marco & Szlek, Andrzej & Weber, Roman, 2010. "Novel conceptual design of a supercritical pulverized coal boiler utilizing high temperature air combustion (HTAC) technology," Energy, Elsevier, vol. 35(7), pages 2752-2760.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Cheong, Kin-Pang & Wang, Guochang & Si, Jicang & Mi, Jianchun, 2021. "Nonpremixed MILD combustion in a laboratory-scale cylindrical furnace: Occurrence and identification," Energy, Elsevier, vol. 216(C).
    2. de Azevedo, Cláudia Gonçalves & de Andrade, José Carlos & de Souza Costa, Fernando, 2015. "Flameless compact combustion system for burning hydrous ethanol," Energy, Elsevier, vol. 89(C), pages 158-167.
    3. Cheong, Kin-Pang & Wang, Guochang & Wang, Bo & Zhu, Rong & Ren, Wei & Mi, Jianchun, 2019. "Stability and emission characteristics of nonpremixed MILD combustion from a parallel-jet burner in a cylindrical furnace," Energy, Elsevier, vol. 170(C), pages 1181-1190.
    4. Kuang, Yucheng & He, Boshu & Wang, Chaojun & Tong, Wenxiao & He, Di, 2021. "Numerical analyses of MILD and conventional combustions with the Eddy Dissipation Concept (EDC)," Energy, Elsevier, vol. 237(C).
    5. Zhao, Zhenghong & Zhang, Zewu & Zha, Xiaojian & Gao, Ge & Li, Xiaoshan & Wu, Fan & Luo, Cong & Zhang, Liqi, 2023. "Internal association between combustion behavior and NOx emissions of pulverized coal MILD-oxy combustion affected by adding H2O," Energy, Elsevier, vol. 263(PD).
    6. Wang, Feifei & Li, Pengfei & Mei, Zhenfeng & Zhang, Jianpeng & Mi, Jianchun, 2014. "Combustion of CH4/O2/N2 in a well stirred reactor," Energy, Elsevier, vol. 72(C), pages 242-253.
    7. Wang, G. & Si, J. & Xu, M. & Mi, J., 2019. "MILD combustion versus conventional bluff-body flame of a premixed CH4/air jet in hot coflow," Energy, Elsevier, vol. 187(C).
    8. Gao, Xuan & Duan, Fei & Lim, Seng Chuan & Yip, Mee Sin, 2013. "NOx formation in hydrogen–methane turbulent diffusion flame under the moderate or intense low-oxygen dilution conditions," Energy, Elsevier, vol. 59(C), pages 559-569.
    9. Tian, Junjian & Liu, Xiang & Shi, Hao & Yao, Yurou & Ni, Zhanshi & Meng, Kengsheng & Hu, Peng & Lin, Qizhao, 2024. "Experimental study on MILD combustion of methane under non-preheated condition in a swirl combustion furnace," Applied Energy, Elsevier, vol. 363(C).
    10. Lawal, Mohammed S. & Fairweather, Michael & Gogolek, Peter & Ingham, Derek B. & Ma, Lin & Pourkashanian, Mohamed & Williams, Alan, 2013. "CFD predictions of wake-stabilised jet flames in a cross-flow," Energy, Elsevier, vol. 53(C), pages 259-269.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yang, D.L. & Tang, G.H. & Fan, Y.H. & Li, X.L. & Wang, S.Q., 2020. "Arrangement and three-dimensional analysis of cooling wall in 1000 MW S–CO2 coal-fired boiler," Energy, Elsevier, vol. 197(C).
    2. Liu, Chunlong & Li, Zhengqi & Kong, Weiguang & Zhao, Yang & Chen, Zhichao, 2010. "Bituminous coal combustion in a full-scale start-up ignition burner: Influence of the excess air ratio," Energy, Elsevier, vol. 35(10), pages 4102-4106.
    3. Gładysz, Paweł & Stanek, Wojciech & Czarnowska, Lucyna & Węcel, Gabriel & Langørgen, Øyvind, 2017. "Thermodynamic assessment of an integrated MILD oxyfuel combustion power plant," Energy, Elsevier, vol. 137(C), pages 761-774.
    4. Gao, Xuan & Duan, Fei & Lim, Seng Chuan & Yip, Mee Sin, 2013. "NOx formation in hydrogen–methane turbulent diffusion flame under the moderate or intense low-oxygen dilution conditions," Energy, Elsevier, vol. 59(C), pages 559-569.
    5. Yu, Byeonghun & Kum, Sung-Min & Lee, Chang-Eon & Lee, Seungro, 2012. "An experimental study of heat transfer and pollutant emission characteristics at varying distances between the burner and the heat exchanger in a compact combustion system," Energy, Elsevier, vol. 42(1), pages 350-357.
    6. Tu, Yaojie & Xu, Shunta & Xu, Mingchen & Liu, Hao & Yang, Wenming, 2020. "Numerical study of methane combustion under moderate or intense low-oxygen dilution regime at elevated pressure conditions up to 8 atm," Energy, Elsevier, vol. 197(C).
    7. Szewczyk, Dariusz & Ślefarski, Rafał & Jankowski, Radosław, 2017. "Analysis of the combustion process of syngas fuels containing high hydrocarbons and nitrogen compounds in Zonal Volumetric Combustion technology," Energy, Elsevier, vol. 121(C), pages 716-725.
    8. Kuang, Yucheng & He, Boshu & Tong, Wenxiao & Wang, Chaojun & Ying, Zhaoping, 2020. "Effects of oxygen concentration and inlet velocity on pulverized coal MILD combustion," Energy, Elsevier, vol. 198(C).
    9. Adamczyk, Wojciech P. & Bialecki, Ryszard A. & Ditaranto, Mario & Gladysz, Pawel & Haugen, Nils Erland L. & Katelbach-Wozniak, Anna & Klimanek, Adam & Sladek, Slawomir & Szlek, Andrzej & Wecel, Gabrie, 2017. "CFD modeling and thermodynamic analysis of a concept of a MILD-OXY combustion large scale pulverized coal boiler," Energy, Elsevier, vol. 140(P1), pages 1305-1315.
    10. Gładysz, Paweł & Stanek, Wojciech & Czarnowska, Lucyna & Sładek, Sławomir & Szlęk, Andrzej, 2018. "Thermo-ecological evaluation of an integrated MILD oxy-fuel combustion power plant with CO2 capture, utilisation, and storage – A case study in Poland," Energy, Elsevier, vol. 144(C), pages 379-392.
    11. Cai, Yongtie & Tay, Kunlin & Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zeng, Guang & Li, Zhiwang & Keng Boon, Siah & Subbaiah, Prabakaran, 2018. "Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review," Applied Energy, Elsevier, vol. 230(C), pages 1447-1544.
    12. Yang, D.L. & Tang, G.H. & Li, X.L. & Fan, Y.H., 2022. "Capacity-dependent configurations of S–CO2 coal-fired boiler by overall analysis with a unified model," Energy, Elsevier, vol. 245(C).
    13. Xu, Qilong & Wang, Shuai & Luo, Kun & Mu, Yanfei & Pan, Lu & Fan, Jianren, 2023. "Process modelling and optimization of a 250 MW IGCC system: Model setup, validation, and preliminary predictions," Energy, Elsevier, vol. 272(C).
    14. Lee, Seungro & Kum, Sung-Min & Lee, Chang-Eon, 2011. "An experimental study of a cylindrical multi-hole premixed burner for the development of a condensing gas boiler," Energy, Elsevier, vol. 36(7), pages 4150-4157.
    15. Yu, Byeonghun & Kum, Sung-Min & Lee, Chang-Eon & Lee, Seungro, 2013. "Combustion characteristics and thermal efficiency for premixed porous-media types of burners," Energy, Elsevier, vol. 53(C), pages 343-350.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:11:p:6583-6595. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.