IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i10p6156-6164.html
   My bibliography  Save this article

Economic and environmental impacts of insulation in district heating pipelines

Author

Listed:
  • Başoğul, Yusuf
  • Keçebaş, Ali

Abstract

The determination of optimum thickness of insulation is often applied to energy technologies and building projects. In this study, the energy, economic and environmental evaluations of thermal insulation in district heating pipeline are discussed. The optimum insulation thickness, energy saving over a lifetime of 10 years, payback period and emissions of CO2, CO and SO2 are calculated for nominal pipe sizes and fuel types based on heating loads in Afyonkarahisar/Turkey. The life cycle cost analysis is used to determine the optimum thickness of the pipeline material in order to take into account the change in inflation that directly affect both the cost of pipeline material and fuels depending on fuel type. The results show that the highest value of optimum insulation thickness, energy savings, emissions and the lowest payback period are reached for a nominal pipe size of 200 mm. About three times more energy saving results by making 200 mm nominal pipe instead of 50 mm. Considering the economical and environmental advantages, the geothermal energy is a better choice and then fuel-oil. When thermal insulation is done in a district heating pipeline, there will be a significant reduction of 21% in the amount of CO2 emitted to the atmosphere.

Suggested Citation

  • Başoğul, Yusuf & Keçebaş, Ali, 2011. "Economic and environmental impacts of insulation in district heating pipelines," Energy, Elsevier, vol. 36(10), pages 6156-6164.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:10:p:6156-6164
    DOI: 10.1016/j.energy.2011.07.049
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211005238
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.07.049?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ogulata, R. Tugrul, 2002. "Sectoral energy consumption in Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 6(5), pages 471-480, October.
    2. Öztürk, İ.T. & Karabay, H. & Bilgen, E., 2006. "Thermo-economic optimization of hot water piping systems: A comparison study," Energy, Elsevier, vol. 31(12), pages 2094-2107.
    3. Fayaz, Rima & Kari, Behrouz M., 2009. "Comparison of energy conservation building codes of Iran, Turkey, Germany, China, ISO 9164 and EN 832," Applied Energy, Elsevier, vol. 86(10), pages 1949-1955, October.
    4. DombaycI, Ö. Altan & Gölcü, Mustafa & Pancar, Yasar, 2006. "Optimization of insulation thickness for external walls using different energy-sources," Applied Energy, Elsevier, vol. 83(9), pages 921-928, September.
    5. Østergaard, Poul Alberg & Lund, Henrik, 2011. "A renewable energy system in Frederikshavn using low-temperature geothermal energy for district heating," Applied Energy, Elsevier, vol. 88(2), pages 479-487, February.
    6. Alberg Østergaard, Poul & Mathiesen, Brian Vad & Möller, Bernd & Lund, Henrik, 2010. "A renewable energy scenario for Aalborg Municipality based on low-temperature geothermal heat, wind power and biomass," Energy, Elsevier, vol. 35(12), pages 4892-4901.
    7. Lund, H. & Möller, B. & Mathiesen, B.V. & Dyrelund, A., 2010. "The role of district heating in future renewable energy systems," Energy, Elsevier, vol. 35(3), pages 1381-1390.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Karlsson, Kenneth B. & Petrović, Stefan N. & Næraa, Rikke, 2016. "Heat supply planning for the ecological housing community Munksøgård," Energy, Elsevier, vol. 115(P3), pages 1733-1747.
    2. Mathiesen, B.V. & Lund, H. & Connolly, D. & Wenzel, H. & Østergaard, P.A. & Möller, B. & Nielsen, S. & Ridjan, I. & Karnøe, P. & Sperling, K. & Hvelplund, F.K., 2015. "Smart Energy Systems for coherent 100% renewable energy and transport solutions," Applied Energy, Elsevier, vol. 145(C), pages 139-154.
    3. David Maya-Drysdale & Louise Krog Jensen & Brian Vad Mathiesen, 2020. "Energy Vision Strategies for the EU Green New Deal: A Case Study of European Cities," Energies, MDPI, vol. 13(9), pages 1-20, May.
    4. Jie, Pengfei & Kong, Xiangfei & Rong, Xian & Xie, Shangqun, 2016. "Selecting the optimum pressure drop per unit length of district heating piping network based on operating strategies," Applied Energy, Elsevier, vol. 177(C), pages 341-353.
    5. Oropeza-Perez, Ivan & Østergaard, Poul Alberg, 2014. "Energy saving potential of utilizing natural ventilation under warm conditions – A case study of Mexico," Applied Energy, Elsevier, vol. 130(C), pages 20-32.
    6. Connolly, D. & Lund, H. & Mathiesen, B.V. & Werner, S. & Möller, B. & Persson, U. & Boermans, T. & Trier, D. & Østergaard, P.A. & Nielsen, S., 2014. "Heat Roadmap Europe: Combining district heating with heat savings to decarbonise the EU energy system," Energy Policy, Elsevier, vol. 65(C), pages 475-489.
    7. Dalla Rosa, A. & Christensen, J.E., 2011. "Low-energy district heating in energy-efficient building areas," Energy, Elsevier, vol. 36(12), pages 6890-6899.
    8. Harrestrup, M. & Svendsen, S., 2014. "Heat planning for fossil-fuel-free district heating areas with extensive end-use heat savings: A case study of the Copenhagen district heating area in Denmark," Energy Policy, Elsevier, vol. 68(C), pages 294-305.
    9. Bloess, Andreas & Schill, Wolf-Peter & Zerrahn, Alexander, 2018. "Power-to-heat for renewable energy integration: A review of technologies, modeling approaches, and flexibility potentials," EconStor Open Access Articles and Book Chapters, ZBW - Leibniz Information Centre for Economics, vol. 212, pages 1611-1626.
    10. Østergaard, P.A. & Lund, H. & Thellufsen, J.Z. & Sorknæs, P. & Mathiesen, B.V., 2022. "Review and validation of EnergyPLAN," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    11. Li, Yan & Fu, Lin & Zhang, Shigang & Zhao, Xiling, 2011. "A new type of district heating system based on distributed absorption heat pumps," Energy, Elsevier, vol. 36(7), pages 4570-4576.
    12. Chittum, Anna & Østergaard, Poul Alberg, 2014. "How Danish communal heat planning empowers municipalities and benefits individual consumers," Energy Policy, Elsevier, vol. 74(C), pages 465-474.
    13. Dalla Rosa, A. & Boulter, R. & Church, K. & Svendsen, S., 2012. "District heating (DH) network design and operation toward a system-wide methodology for optimizing renewable energy solutions (SMORES) in Canada: A case study," Energy, Elsevier, vol. 45(1), pages 960-974.
    14. Lund, Henrik & Werner, Sven & Wiltshire, Robin & Svendsen, Svend & Thorsen, Jan Eric & Hvelplund, Frede & Mathiesen, Brian Vad, 2014. "4th Generation District Heating (4GDH)," Energy, Elsevier, vol. 68(C), pages 1-11.
    15. Sperling, Karl & Möller, Bernd, 2012. "End-use energy savings and district heating expansion in a local renewable energy system – A short-term perspective," Applied Energy, Elsevier, vol. 92(C), pages 831-842.
    16. Jimenez-Navarro, Juan-Pablo & Kavvadias, Konstantinos & Filippidou, Faidra & Pavičević, Matija & Quoilin, Sylvain, 2020. "Coupling the heating and power sectors: The role of centralised combined heat and power plants and district heat in a European decarbonised power system," Applied Energy, Elsevier, vol. 270(C).
    17. Lund, Henrik & Østergaard, Poul Alberg & Connolly, David & Mathiesen, Brian Vad, 2017. "Smart energy and smart energy systems," Energy, Elsevier, vol. 137(C), pages 556-565.
    18. Tol, H.İ. & Svendsen, S., 2012. "Improving the dimensioning of piping networks and network layouts in low-energy district heating systems connected to low-energy buildings: A case study in Roskilde, Denmark," Energy, Elsevier, vol. 38(1), pages 276-290.
    19. Čulig-Tokić, Dario & Krajačić, Goran & Doračić, Borna & Mathiesen, Brian Vad & Krklec, Robert & Larsen, Jesper Møller, 2015. "Comparative analysis of the district heating systems of two towns in Croatia and Denmark," Energy, Elsevier, vol. 92(P3), pages 435-443.
    20. Kılkış, Şiir, 2015. "Exergy transition planning for net-zero districts," Energy, Elsevier, vol. 92(P3), pages 515-531.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:10:p:6156-6164. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.