IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v275y2023ics0360544223007739.html
   My bibliography  Save this article

Technical feasibility and sensitivity analysis of medical waste gasification by the converter gas

Author

Listed:
  • Qin, Linbo
  • Zhu, Shiquan
  • Xu, Zhe
  • Zhao, Bo
  • Chen, Wangsheng
  • Zhang, Qiang
  • Han, Jun

Abstract

The temperature of the converter gas at the outlet of the converter is as high as 1600 °C, and the output is about 120–150 Nm3/tons steel. In order to improve the utilization efficiency of heat energy, and the recovery rate and calorific value of the converter gas, medical waste (MW) gasification of by the converter gas was proposed. At the same time, the technical feasibility and sensitivity analysis of MW gasification were conducted by Aspen Plus soft on the basis of Gibbs free energy minimization. The simulated results were successfully validated with the experimental data from MW gasification in a bench scale gasifier. Moreover, the influence of the gasification temperature, steam/MW ratio and MW/converter gas ratio on the composition, the low heating value (LHV), gas yield (GY), and carbon conversion efficiency (CCE) were evaluated. During the simulation, the mixed gas (CO: CO2: N2 = 40: 20: 40) was used as the simulated converter. The simulated results demonstrated that the optimum parameters were 1050 °C gasification temperature, 0.8 steam/MW ratio, and 0.08 kg/m3 MW/converter gas ratio, CO, H2, and CO2 reached to 46.54%, 38.09%, and 0.10% due to Boudouard reaction and water-gas shift reaction. After MW gasification, CO2 content in the converter gas was decreased from 20% to 0.10%, and LHV was increased from 5480 to 10,021 kJ/Nm3.

Suggested Citation

  • Qin, Linbo & Zhu, Shiquan & Xu, Zhe & Zhao, Bo & Chen, Wangsheng & Zhang, Qiang & Han, Jun, 2023. "Technical feasibility and sensitivity analysis of medical waste gasification by the converter gas," Energy, Elsevier, vol. 275(C).
    • Handle: RePEc:eee:energy:v:275:y:2023:i:c:s0360544223007739
    DOI: 10.1016/j.energy.2023.127379
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223007739
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127379?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tavares, Raquel & Monteiro, Eliseu & Tabet, Fouzi & Rouboa, Abel, 2020. "Numerical investigation of optimum operating conditions for syngas and hydrogen production from biomass gasification using Aspen Plus," Renewable Energy, Elsevier, vol. 146(C), pages 1309-1314.
    2. Ajorloo, Mojtaba & Ghodrat, Maryam & Scott, Jason & Strezov, Vladimir, 2022. "Modelling and statistical analysis of plastic biomass mixture co-gasification," Energy, Elsevier, vol. 256(C).
    3. Zhang, Qi & Zhao, Xiaoyu & Lu, Hongyou & Ni, Tuanjie & Li, Yu, 2017. "Waste energy recovery and energy efficiency improvement in China’s iron and steel industry," Applied Energy, Elsevier, vol. 191(C), pages 502-520.
    4. Song, Yuhang & Tian, Ye & Zhou, Xiong & Liang, Shimang & Li, Xuanyu & Yang, Yu & Yuan, Liang, 2021. "Simulation of air-steam gasification of pine sawdust in an updraft gasification system for production of hydrogen-rich producer gas," Energy, Elsevier, vol. 226(C).
    5. Jiao, Liguo & Li, Jian & Yan, Beibei & Chen, Guanyi & Ahmed, Sarwaich, 2022. "Microwave torrefaction integrated with gasification: Energy and exergy analyses based on Aspen Plus modeling," Applied Energy, Elsevier, vol. 319(C).
    6. Zhou, Chuanbin & Yang, Guang & Ma, Shijun & Liu, Yijie & Zhao, Zhilan, 2021. "The impact of the COVID-19 pandemic on waste-to-energy and waste-to-material industry in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ünal, Berat Berkan & Onaygil, Sermin & Acuner, Ebru & Cin, Rabia, 2022. "Application of energy efficiency obligation scheme for electricity distribution companies in Turkey," Energy Policy, Elsevier, vol. 163(C).
    2. Wang, Can & Zheng, Xinzhu & Cai, Wenjia & Gao, Xue & Berrill, Peter, 2017. "Unexpected water impacts of energy-saving measures in the iron and steel sector: Tradeoffs or synergies?," Applied Energy, Elsevier, vol. 205(C), pages 1119-1127.
    3. An, Runying & Yu, Biying & Li, Ru & Wei, Yi-Ming, 2018. "Potential of energy savings and CO2 emission reduction in China’s iron and steel industry," Applied Energy, Elsevier, vol. 226(C), pages 862-880.
    4. Chen, Lingen & Yang, Bo & Feng, Huijun & Ge, Yanlin & Xia, Shaojun, 2020. "Performance optimization of an open simple-cycle gas turbine combined cooling, heating and power plant driven by basic oxygen furnace gas in China's steelmaking plants," Energy, Elsevier, vol. 203(C).
    5. Qian Zhou & Helmut Yabar & Takeshi Mizunoya & Yoshiro Higano, 2017. "Evaluation of Integrated Air Pollution and Climate Change Policies: Case Study in the Thermal Power Sector in Chongqing City, China," Sustainability, MDPI, vol. 9(10), pages 1-17, September.
    6. Zhuo, Yuting & Shen, Yansong, 2020. "Three-dimensional transient modelling of coal and coke co-combustion in the dynamic raceway of ironmaking blast furnaces," Applied Energy, Elsevier, vol. 261(C).
    7. Ortega-Fernández, Iñigo & Rodríguez-Aseguinolaza, Javier, 2019. "Thermal energy storage for waste heat recovery in the steelworks: The case study of the REslag project," Applied Energy, Elsevier, vol. 237(C), pages 708-719.
    8. Michel Feidt & Monica Costea & Renaud Feidt & Quentin Danel & Christelle Périlhon, 2020. "New Criteria to Characterize the Waste Heat Recovery," Energies, MDPI, vol. 13(4), pages 1-15, February.
    9. Llera, Rocio & Vigil, Miguel & Díaz-Díaz, Sara & Martínez Huerta, Gemma Marta, 2022. "Prospective environmental and techno-economic assessment of steam production by means of heat pipes in the steel industry," Energy, Elsevier, vol. 239(PD).
    10. Adnan, Muflih A. & Hossain, Mohammad M. & Golam Kibria, Md, 2022. "Converting waste into fuel via integrated thermal and electrochemical routes: An analysis of thermodynamic approach on thermal conversion," Applied Energy, Elsevier, vol. 311(C).
    11. Qi, Jingwei & Wang, Yijie & Xu, Pengcheng & Hu, Ming & Huhe, Taoli & Ling, Xiang & Yuan, Haoran & Chen, Yong, 2024. "Study on the Co-gasification characteristics of biomass and municipal solid waste based on machine learning," Energy, Elsevier, vol. 290(C).
    12. Duan, Cuncun & Chen, Bin, 2020. "Driving factors of water-energy nexus in China," Applied Energy, Elsevier, vol. 257(C).
    13. Rodrigues da Silva, Rafael & Mathias, Flavio Roberto de Carvalho & Bajay, Sergio Valdir, 2018. "Potential energy efficiency improvements for the Brazilian iron and steel industry: Fuel and electricity conservation supply curves for integrated steel mills," Energy, Elsevier, vol. 153(C), pages 816-824.
    14. Pashchenko, Dmitry, 2018. "First law energy analysis of thermochemical waste-heat recuperation by steam methane reforming," Energy, Elsevier, vol. 143(C), pages 478-487.
    15. Yongbum Kwon & Hyeji Lee & Heekwan Lee, 2018. "Implication of the cluster analysis using greenhouse gas emissions of Asian countries to climate change mitigation," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 23(8), pages 1225-1249, December.
    16. Mohamad Aziz, Nur Atiqah & Mohamed, Hassan & Kania, Dina & Ong, Hwai Chyuan & Zainal, Bidattul Syirat & Junoh, Hazlina & Ker, Pin Jern & Silitonga, A.S., 2024. "Bioenergy production by integrated microwave-assisted torrefaction and pyrolysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 191(C).
    17. Osat, Mohammad & Shojaati, Faryar & Osat, Mojtaba, 2023. "A solar-biomass system associated with CO2 capture, power generation and waste heat recovery for syngas production from rice straw and microalgae: Technological, energy, exergy, exergoeconomic and env," Applied Energy, Elsevier, vol. 340(C).
    18. Bangalore Ashok, Rahul Prasad & Oinas, Pekka & Forssell, Susanna, 2022. "Techno-economic evaluation of a biorefinery to produce γ-valerolactone (GVL), 2-methyltetrahydrofuran (2-MTHF) and 5-hydroxymethylfurfural (5-HMF) from spruce," Renewable Energy, Elsevier, vol. 190(C), pages 396-407.
    19. Piotr Kordel & Radosław Wolniak, 2021. "Technology Entrepreneurship and the Performance of Enterprises in the Conditions of Covid-19 Pandemic: The Fuzzy Set Analysis of Waste to Energy Enterprises in Poland," Energies, MDPI, vol. 14(13), pages 1-22, June.
    20. Ajorloo, Mojtaba & Ghodrat, Maryam & Scott, Jason & Strezov, Vladimir, 2022. "Modelling and statistical analysis of plastic biomass mixture co-gasification," Energy, Elsevier, vol. 256(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:275:y:2023:i:c:s0360544223007739. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.