IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v261y2022ipas0360544222021430.html
   My bibliography  Save this article

Characterization of FCC slurry oil products thermally converted over modified coke powder

Author

Listed:
  • Li, Jiazhou
  • Chen, Xiaodong
  • Zhang, Yuming
  • Xu, Jinghui
  • Liu, Yindong
  • Wang, Luhai
  • Zhang, Wei
  • Guo, Jinjun
  • Zhang, Wenbin
  • Sun, Qiang
  • Qi, Yunfei

Abstract

Slurry oil contains considerable amounts of aromatics but has the drawbacks of difficult cracking and easy coking. Fluidized thermal conversion technique realizes not only the aromatics enrichment but also the removal of solid particles in slurry oil. Herein, the fluidized thermal conversion of slurry oil using unmodified Coke, Ni-modified Coke and Fe-modified Coke as heat carriers were investigated at 500 °C by a fluidized bed reactor. The results demonstrated that two modified Coke produced the lower oil yields of 83.33 wt% (Ni-modified Coke) and 82.57 wt% (Fe-modified Coke) and the higher coke yields of 14.72 wt% (Ni-modified Coke) and 15.59 wt% (Fe-modified Coke) in comparison to the oil and coke yields of 84.02 and 14.21 wt% over unmodified Coke. Moreover, the yield of gas product H2 increased significantly from 5.0 mL/g (unmodified Coke) to 17.5 mL/g (Fe-modified Coke) and 22.4 mL/g (Ni-modified Coke). Slurry oil consisted mainly of aromatics, of which aromatics with two to five rings accounted for 77.14 wt%. Upon using unmodified Coke, Ni-modified Coke and Fe-modified Coke, the proportion of aromatics with two to five rings increased up to 85.86, 89.49 and 87.08 wt% respectively, realizing the aromatics enrichment effectively. Fluidized thermal conversion also facilitated the solid particles removal from slurry oil. The removal rates over unmodified Coke, Ni-modified Coke and Fe-modified Coke were higher than 95%. All above experimental results indicated that fluidized thermal conversion technique could realize the efficient utilization of both slurry oil and fluidized coke powder. The aromatics enrichment and the solid particles removal in slurry oil could be achieved efficiently.

Suggested Citation

  • Li, Jiazhou & Chen, Xiaodong & Zhang, Yuming & Xu, Jinghui & Liu, Yindong & Wang, Luhai & Zhang, Wei & Guo, Jinjun & Zhang, Wenbin & Sun, Qiang & Qi, Yunfei, 2022. "Characterization of FCC slurry oil products thermally converted over modified coke powder," Energy, Elsevier, vol. 261(PA).
  • Handle: RePEc:eee:energy:v:261:y:2022:i:pa:s0360544222021430
    DOI: 10.1016/j.energy.2022.125257
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222021430
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2022.125257?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hu, Mian & Laghari, Mahmood & Cui, Baihui & Xiao, Bo & Zhang, Beiping & Guo, Dabin, 2018. "Catalytic cracking of biomass tar over char supported nickel catalyst," Energy, Elsevier, vol. 145(C), pages 228-237.
    2. Li, Jiazhou & Zhang, Yuming & Wang, Bing & Zhang, Wei, 2022. "Research on the aromatics enrichment and solid particles removal during slurry oil fluidized thermal conversion," Energy, Elsevier, vol. 240(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Zhikun & Zhu, Zongyuan & Shen, Boxiong & Liu, Lina, 2019. "Insights into biochar and hydrochar production and applications: A review," Energy, Elsevier, vol. 171(C), pages 581-598.
    2. Pang, Yunji & Wu, Yuting & Chen, Yisheng & Luo, Fuliang & Chen, Junjun, 2020. "Degradation effect of Ce/Al2O3 catalyst on pyrolysis volatility of pine," Renewable Energy, Elsevier, vol. 162(C), pages 134-143.
    3. Yang, Xiaoxia & Gu, Shengshen & Kheradmand, Amanj & Kan, Tao & He, Jing & Strezov, Vladimir & Zou, Ruiping & Yu, Aibing & Jiang, Yijiao, 2022. "Tunable syngas production from biomass: Synergistic effect of steam, Ni–CaO catalyst, and biochar," Energy, Elsevier, vol. 254(PB).
    4. Hervy, Maxime & Weiss-Hortala, Elsa & Pham Minh, Doan & Dib, Hadi & Villot, Audrey & Gérente, Claire & Berhanu, Sarah & Chesnaud, Anthony & Thorel, Alain & Le Coq, Laurence & Nzihou, Ange, 2019. "Reactivity and deactivation mechanisms of pyrolysis chars from bio-waste during catalytic cracking of tar," Applied Energy, Elsevier, vol. 237(C), pages 487-499.
    5. Wang, Shuxiao & Zhang, Yuyuan & Shan, Rui & Gu, Jing & Yuan, Haoran & Chen, Yong, 2022. "Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production," Energy, Elsevier, vol. 246(C).
    6. Deng, Jin & Liu, Ziliang & Qin, Tao & Chen, Xin & Li, Kuo & Meng, Linshuai & Zhao, Yan & Zhou, Yujie & Yuan, Shenfu, 2022. "Development of Ni-doped Fe/Ca catalyst to be used for hydrogen-rich syngas production during medicine residue pyrolysis," Energy, Elsevier, vol. 254(PA).
    7. Shen, Feng & Xiong, Xinni & Fu, Junyan & Yang, Jirui & Qiu, Mo & Qi, Xinhua & Tsang, Daniel C.W., 2020. "Recent advances in mechanochemical production of chemicals and carbon materials from sustainable biomass resources," Renewable and Sustainable Energy Reviews, Elsevier, vol. 130(C).
    8. Yang, Hanmin & Cui, Yuxiao & Han, Tong & Sandström, Linda & Jönsson, Pär & Yang, Weihong, 2022. "High-purity syngas production by cascaded catalytic reforming of biomass pyrolysis vapors," Applied Energy, Elsevier, vol. 322(C).
    9. Lu, Chen & Zhang, Xitong & Gao, Ying & Lin, Yunhao & Xu, Jiayu & Zhu, Chong & Zhu, Yuezhao, 2021. "Parametric study of catalytic co-gasification of cotton stalk and aqueous phase from wheat straw using hydrothermal carbonation," Energy, Elsevier, vol. 216(C).
    10. Zhang, Li & Yao, Zonglu & Zhao, Lixin & Li, Zhihe & Yi, Weiming & Kang, Kang & Jia, Jixiu, 2021. "Synthesis and characterization of different activated biochar catalysts for removal of biomass pyrolysis tar," Energy, Elsevier, vol. 232(C).
    11. Lin, Qunqing & Zhang, Shuping & Wang, Jiaxing & Yin, Haoxin, 2021. "Synthesis of modified char-supported Ni–Fe catalyst with hierarchical structure for catalytic cracking of biomass tar," Renewable Energy, Elsevier, vol. 174(C), pages 188-198.
    12. Li, Lin & Tang, Dawei & Song, Yongchen & Jiang, Bo & Zhang, Qian, 2018. "Hydrogen production from ethanol steam reforming on Ni-Ce/MMT catalysts," Energy, Elsevier, vol. 149(C), pages 937-943.
    13. Wang, Shuxiao & Shan, Rui & Lu, Tao & Zhang, Yuyuan & Yuan, Haoran & Chen, Yong, 2020. "Pyrolysis char derived from waste peat for catalytic reforming of tar model compound," Applied Energy, Elsevier, vol. 263(C).
    14. Zhang, Shuping & Yin, Haoxin & Wang, Jiaxing & Zhu, Shuguang & Xiong, Yuanquan, 2021. "Catalytic cracking of biomass tar using Ni nanoparticles embedded carbon nanofiber/porous carbon catalysts," Energy, Elsevier, vol. 216(C).
    15. Gu, Jing & Wang, Shuxiao & Lu, Tao & Wu, Yufeng & Yuan, Haoran & Chen, Yong, 2020. "Synthesis and evaluation of pyrolysis waste peat char supported catalyst for steam reforming of toluene," Renewable Energy, Elsevier, vol. 160(C), pages 964-973.
    16. Hu, Mian & Ye, Zhiheng & Zhang, Qi & Xue, Qiping & Li, Zhibin & Wang, Junliang & Pan, Zhiyan, 2022. "Towards understanding the chemical reactions between KOH and oxygen-containing groups during KOH-catalyzed pyrolysis of biomass," Energy, Elsevier, vol. 245(C).
    17. Yang Gao & Huaqing Xie & Zhenyu Yu & Mengxin Qin & Zhenguo Wu & Panlei Wang & Xi Zhao & Shiyi Zhang, 2023. "Two-Stage Dry Reforming Process for Biomass Gasification: Product Characteristics and Energy Analysis," Energies, MDPI, vol. 16(12), pages 1-13, June.
    18. Ly, Hoang Vu & Lim, Dong-Hyeon & Sim, Jae Wook & Kim, Seung-Soo & Kim, Jinsoo, 2018. "Catalytic pyrolysis of tulip tree (Liriodendron) in bubbling fluidized-bed reactor for upgrading bio-oil using dolomite catalyst," Energy, Elsevier, vol. 162(C), pages 564-575.
    19. Gao, Ningbo & Salisu, Jamilu & Quan, Cui & Williams, Paul, 2021. "Modified nickel-based catalysts for improved steam reforming of biomass tar: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    20. Li, Jian & Tao, Junyu & Yan, Beibei & Cheng, Kexin & Chen, Guanyi & Hu, Jianli, 2020. "Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound," Applied Energy, Elsevier, vol. 261(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:261:y:2022:i:pa:s0360544222021430. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.