IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v207y2020ics0360544220311932.html
   My bibliography  Save this article

Experimental study of steam and carbon dioxide microwave plasma for advanced thermal treatment application

Author

Listed:
  • Vecten, S.
  • Wilkinson, M.
  • Martin, A.
  • Dexter, A.
  • Bimbo, N.
  • Dawson, R.
  • Herbert, B.

Abstract

Pollution reduction from waste management and energy generation is necessary to mitigate climate change and is one of the major challenges of the 21st century. This can be achieved through the development of innovative energy recovery technologies from biomass and wastes, such as microwave plasma gasification. An envelope of stable CO2 plasma operation is described, by varying working gas flow rate at applied microwave powers between 1 and 6 kW, whereas H2O plasma operation is possible with flow rate ranging from 20 to 50 g/min and microwave powers between 2.5 and 6 kW. The temperature generated in a large chamber connected to the plasma torch is recorded, reaching up to 850 °C, showing a heterogeneous temperature distribution. In addition, optical emission spectroscopy measurements provide an insight into plasma chemistry and demonstrate the dissociation of CO2 and H2O molecules at extremely high temperatures of up to 6300 °C assuming local thermodynamic equilibrium. The experimental results demonstrate that the microwave plasma torch provides an ideal environment for gasification with high temperature and very chemically reactive species. This study provides valuable information for the design of microwave plasma gasification reactors with great potential for effective solid feedstock conversion into high quality syngas for energy production.

Suggested Citation

  • Vecten, S. & Wilkinson, M. & Martin, A. & Dexter, A. & Bimbo, N. & Dawson, R. & Herbert, B., 2020. "Experimental study of steam and carbon dioxide microwave plasma for advanced thermal treatment application," Energy, Elsevier, vol. 207(C).
    • Handle: RePEc:eee:energy:v:207:y:2020:i:c:s0360544220311932
    DOI: 10.1016/j.energy.2020.118086
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220311932
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118086?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hong, Yong C. & Lee, Sang J. & Shin, Dong H. & Kim, Ye J. & Lee, Bong J. & Cho, Seong Y. & Chang, Han S., 2012. "Syngas production from gasification of brown coal in a microwave torch plasma," Energy, Elsevier, vol. 47(1), pages 36-40.
    2. Sharaf, Omar Z. & Orhan, Mehmet F., 2014. "An overview of fuel cell technology: Fundamentals and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 810-853.
    3. Lupa, Christopher J. & Wylie, Steve R. & Shaw, Andrew & Al-Shamma'a, Ahmed & Sweetman, Andrew J. & Herbert, Ben M.J., 2013. "Gas evolution and syngas heating value from advanced thermal treatment of waste using microwave-induced plasma," Renewable Energy, Elsevier, vol. 50(C), pages 1065-1072.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Owen Sedej & Eric Mbonimpa & Trevor Sleight & Jeremy Slagley, 2022. "Application of Machine Learning to Predict the Performance of an EMIPG Reactor Using Data from Numerical Simulations," Energies, MDPI, vol. 15(7), pages 1-22, March.
    2. Wu, Tianyi & Wang, Junfeng & Zhang, Wei & Zuo, Lei & Xu, Haojie & Li, Bin, 2023. "Plasma bubble characteristics and hydrogen production performance of methanol decomposition by liquid phase discharge," Energy, Elsevier, vol. 273(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Ming & Woudstra, T. & Promes, E.J.O. & Restrepo, S.Y.G. & Aravind, P.V., 2014. "System development and self-sustainability analysis for upgrading human waste to power," Energy, Elsevier, vol. 68(C), pages 377-384.
    2. Das, Himadry Shekhar & Tan, Chee Wei & Yatim, A.H.M., 2017. "Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 268-291.
    3. Jae Yun Jeong & Inje Kang & Ki Seok Choi & Byeong-Hee Lee, 2018. "Network Analysis on Green Technology in National Research and Development Projects in Korea," Sustainability, MDPI, vol. 10(4), pages 1-12, April.
    4. Elhambakhsh, Abbas & Van Duc Long, Nguyen & Lamichhane, Pradeep & Hessel, Volker, 2023. "Recent progress and future directions in plasma-assisted biomass conversion to hydrogen," Renewable Energy, Elsevier, vol. 218(C).
    5. Lv, Xiuqing & Chen, Huili & Zhou, Wei & Li, Si-Dian & Cheng, Fangqin & Shao, Zongping, 2022. "SrCo0.4Fe0.4Zr0.1Y0.1O3-δ, A new CO2 tolerant cathode for proton-conducting solid oxide fuel cells," Renewable Energy, Elsevier, vol. 185(C), pages 8-16.
    6. Mehrpooya, Mehdi & Ansarinasab, Hojat & Mousavi, Seyed Ali, 2021. "Life cycle assessment and exergoeconomic analysis of the multi-generation system based on fuel cell for methanol, power, and heat production," Renewable Energy, Elsevier, vol. 172(C), pages 1314-1332.
    7. Lin, Jui-Yen & Shih, Yu-Jen & Chen, Po-Yen & Huang, Yao-Hui, 2016. "Precipitation recovery of boron from aqueous solution by chemical oxo-precipitation at room temperature," Applied Energy, Elsevier, vol. 164(C), pages 1052-1058.
    8. Wang, Junye, 2015. "Theory and practice of flow field designs for fuel cell scaling-up: A critical review," Applied Energy, Elsevier, vol. 157(C), pages 640-663.
    9. Owen Sedej & Eric Mbonimpa & Trevor Sleight & Jeremy Slagley, 2022. "Application of Machine Learning to Predict the Performance of an EMIPG Reactor Using Data from Numerical Simulations," Energies, MDPI, vol. 15(7), pages 1-22, March.
    10. Xuexia Zhang & Zixuan Yu & Weirong Chen, 2019. "Life Prediction Based on D-S ELM for PEMFC," Energies, MDPI, vol. 12(19), pages 1-15, September.
    11. Bao, Zhiming & Niu, Zhiqiang & Jiao, Kui, 2020. "Gas distribution and droplet removal of metal foam flow field for proton exchange membrane fuel cells," Applied Energy, Elsevier, vol. 280(C).
    12. Jiang, Hongliang & Xu, Liangfei & Li, Jianqiu & Hu, Zunyan & Ouyang, Minggao, 2019. "Energy management and component sizing for a fuel cell/battery/supercapacitor hybrid powertrain based on two-dimensional optimization algorithms," Energy, Elsevier, vol. 177(C), pages 386-396.
    13. Li, Yan & Feng, Yanhui & Zhang, Xinxin & Wu, Chuansong, 2014. "Energy propagation in plasma arc welding with keyhole tracking," Energy, Elsevier, vol. 64(C), pages 1044-1056.
    14. Saka, Kenan & Orhan, Mehmet Fatih, 2022. "Analysis of stack operating conditions for a polymer electrolyte membrane fuel cell," Energy, Elsevier, vol. 258(C).
    15. Faydi, Younes & Djdiaa, AbdelAli & Laabassi, Hichame & Ait Omar, Aissam & Bouzekri, Hicham, 2024. "Contribution of green hydrogen vector to guarantee electricity feeding in remote areas- Case study," Renewable Energy, Elsevier, vol. 222(C).
    16. Zhu, Li & Chen, Junghui, 2018. "Prognostics of PEM fuel cells based on Gaussian process state space models," Energy, Elsevier, vol. 149(C), pages 63-73.
    17. Mohammadi, Mohammad & Noorollahi, Younes & Mohammadi-ivatloo, Behnam & Yousefi, Hossein, 2017. "Energy hub: From a model to a concept – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1512-1527.
    18. Isa, Normazlina Mat & Das, Himadry Shekhar & Tan, Chee Wei & Yatim, A.H.M. & Lau, Kwan Yiew, 2016. "A techno-economic assessment of a combined heat and power photovoltaic/fuel cell/battery energy system in Malaysia hospital," Energy, Elsevier, vol. 112(C), pages 75-90.
    19. Pu, Zonghua & Zhang, Gaixia & Hassanpour, Amir & Zheng, Dewen & Wang, Shanyu & Liao, Shijun & Chen, Zhangxin & Sun, Shuhui, 2021. "Regenerative fuel cells: Recent progress, challenges, perspectives and their applications for space energy system," Applied Energy, Elsevier, vol. 283(C).
    20. Ji-Hyun Oh & Tien-Dung Vuong & Kwang-Yong Kim, 2022. "Optimization of a Membraneless Microfluidic Fuel Cell with a Double-Bridge Flow Channel," Energies, MDPI, vol. 15(3), pages 1-13, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:207:y:2020:i:c:s0360544220311932. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.