IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v124y2017icp330-335.html
   My bibliography  Save this article

Experimental investigation of exergy loss analysis in newly designed compact heat exchangers

Author

Listed:
  • İpek, Osman
  • Kılıç, Bayram
  • Gürel, Barış

Abstract

In the present paper, exergy loss analysis of newly designed compact heat exchanger (CHE) was experimentally investigated. For this reason, experimental system used for experimental analysis of the newly designed CHE and brazed plate heat exchanger (BPHE) were designed and constructed. Thermodynamic analysis of newly designed CHE and BPHE were also investigated. The experimental results of the CHE and BPHE are compared. Exergy loss values are calculated for each heat exchanger type. The experimental results show that similar exergy loss values were obtained. The highest exergy loss value for newly designed CHE has been obtained as about 7.6 kW, while the least exergy loss value has been obtained as about 4.65 kW for the same heat exchanger. The results of the experiments are compared and presented graphically.

Suggested Citation

  • İpek, Osman & Kılıç, Bayram & Gürel, Barış, 2017. "Experimental investigation of exergy loss analysis in newly designed compact heat exchangers," Energy, Elsevier, vol. 124(C), pages 330-335.
    • Handle: RePEc:eee:energy:v:124:y:2017:i:c:p:330-335
    DOI: 10.1016/j.energy.2017.02.061
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217302359
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.02.061?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Suphanit, B. & Bischert, A. & Narataruksa, P., 2007. "Exergy loss analysis of heat transfer across the wall of the dividing-wall distillation column," Energy, Elsevier, vol. 32(11), pages 2121-2134.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Hui & Liu, Ying-wen, 2021. "A new optimization concept of the recuperator based on Hampson-type miniature cryocoolers," Energy, Elsevier, vol. 224(C).
    2. Sinan Uguz & Osman Ipek, 2022. "Prediction of the parameters affecting the performance of compact heat exchangers with an innovative design using machine learning techniques," Journal of Intelligent Manufacturing, Springer, vol. 33(5), pages 1393-1417, June.
    3. Chater, Hamza & Asbik, Mohamed & Mouaky, Ammar & Koukouch, Abdelghani & Belandria, Veronica & Sarh, Brahim, 2023. "Experimental and CFD investigation of a helical coil heat exchanger coupled with a parabolic trough solar collector for heating a batch reactor: An exergy approach," Renewable Energy, Elsevier, vol. 202(C), pages 1507-1519.
    4. Keçebaş, Ali & Georgiev, Aleksandar G. & Karaca-Dolgun, Gülşah, 2024. "Exergy and exergoenvironmental analyses for characterizing heat transfer and pressure drop of any heat exchanger," Energy, Elsevier, vol. 290(C).
    5. Adamson, Keri-Marie & Walmsley, Timothy Gordon & Carson, James K. & Chen, Qun & Schlosser, Florian & Kong, Lana & Cleland, Donald John, 2022. "High-temperature and transcritical heat pump cycles and advancements: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khalili-Garakani, Amirhossein & Ivakpour, Javad & Kasiri, Norollah, 2016. "Evolutionary synthesis of optimum light ends recovery unit with exergy analysis application," Applied Energy, Elsevier, vol. 168(C), pages 507-522.
    2. Khoa, T.D. & Shuhaimi, M. & Hashim, H. & Panjeshahi, M.H., 2010. "Optimal design of distillation column using three dimensional exergy analysis curves," Energy, Elsevier, vol. 35(12), pages 5309-5319.
    3. Kiss, Anton A. & Flores Landaeta, Servando J. & Infante Ferreira, Carlos A., 2012. "Towards energy efficient distillation technologies – Making the right choice," Energy, Elsevier, vol. 47(1), pages 531-542.
    4. Khalili-Garakani, Amirhossein & Ivakpour, Javad & Kasiri, Norollah, 2016. "A new search space reduction method based on exergy analysis for distillation columns synthesis," Energy, Elsevier, vol. 116(P1), pages 795-811.
    5. Sun, Jinsheng & Wang, Fan & Ma, Tingting & Gao, Hong & Liu, Yanzhen & Cai, Fang, 2012. "Exergy analysis of a parallel double-effect organosilicon monomer distillation scheme," Energy, Elsevier, vol. 47(1), pages 498-504.
    6. Haragovics, Máté & Mizsey, Péter, 2014. "A novel application of exergy analysis: Lean manufacturing tool to improve energy efficiency and flexibility of hydrocarbon processing," Energy, Elsevier, vol. 77(C), pages 382-390.
    7. Cossio-Vargas, E. & Hernandez, S. & Segovia-Hernandez, J.G. & Cano-Rodriguez, M.I., 2011. "Simulation study of the production of biodiesel using feedstock mixtures of fatty acids in complex reactive distillation columns," Energy, Elsevier, vol. 36(11), pages 6289-6297.
    8. Kim, Young Han, 2015. "Energy saving of side-column DWCs for quaternary separation," Energy, Elsevier, vol. 86(C), pages 617-626.
    9. Castelo Branco, David A. & Szklo, Alexandre & Gomes, Gabriel & Borba, Bruno S.M.C. & Schaeffer, Roberto, 2011. "Abatement costs of CO2 emissions in the Brazilian oil refining sector," Applied Energy, Elsevier, vol. 88(11), pages 3782-3790.
    10. Sun, Jinsheng & Wang, Fan & Ma, Tingting & Gao, Hong & Wu, Peng & Liu, Lili, 2012. "Energy and exergy analysis of a five-column methanol distillation scheme," Energy, Elsevier, vol. 45(1), pages 696-703.
    11. Long, Nguyen Van Duc & Lee, Moonyong, 2015. "A hybrid technology combining heat pump and thermally coupled distillation sequence for retrofit and debottlenecking," Energy, Elsevier, vol. 81(C), pages 103-110.
    12. Kim, Young Han, 2016. "Energy saving of benzene separation process for environmentally friendly gasoline using an extended DWC (divided wall column)," Energy, Elsevier, vol. 100(C), pages 58-65.
    13. Sun, Jinsheng & Dai, Leilei & Shi, Ming & Gao, Hong & Cao, Xijia & Liu, Guangxin, 2014. "Further optimization of a parallel double-effect organosilicon distillation scheme through exergy analysis," Energy, Elsevier, vol. 69(C), pages 370-377.
    14. Khoa, T.D. & Shuhaimi, M. & Nam, H.M., 2012. "Application of three dimensional exergy analysis curves for absorption columns," Energy, Elsevier, vol. 37(1), pages 273-280.
    15. Choe, Changgwon & Haider, Junaid & Lim, Hankwon, 2023. "Carbon capture and liquefaction from methane steam reforming unit: 4E’s analysis (Energy, Exergy, Economic, and Environmental)," Applied Energy, Elsevier, vol. 332(C).
    16. Kim, Young Han, 2014. "Application of partially diabatic divided wall column to floating liquefied natural gas plant," Energy, Elsevier, vol. 70(C), pages 435-443.
    17. Nguyen, Nghi & Demirel, Yaşar, 2011. "Using thermally coupled reactive distillation columns in biodiesel production," Energy, Elsevier, vol. 36(8), pages 4838-4847.
    18. Zhang, Hongru & Wang, Shuai & Tang, Jiaxuan & Li, Ningning & Li, Yanan & Cui, Peizhe & Wang, Yinglong & Zheng, Shiqing & Zhu, Zhaoyou & Ma, Yixin, 2021. "Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis," Energy, Elsevier, vol. 229(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:124:y:2017:i:c:p:330-335. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.