IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v80y2005i1p77-95.html
   My bibliography  Save this article

Effects of tapes with double-sided delta-winglets on heat and vortex characteristics

Author

Listed:
  • Yakut, Kenan
  • Sahin, Bayram
  • Celik, Cafer
  • Alemdaroglu, Nihal
  • Kurnuc, Aslihan

Abstract

An experimental study was carried out for tapes with double-sided delta-winglets under different geometrical and flow parameters, including angles of attack (90°, 60° and 30°), winglet heights (8, 12 and 16 mm), pitch arrangements (25, 50 and 75 mm) and Reynolds numbers (3690, 10493 and 16906). By using the Taguchi experimental-design method, the optimum parameters of the turbulator were determined by obtaining the Nusselt number, friction factor, amplitude of fluctuation pressure of the vortices and the vortex-shedding frequency. First of all, each goal was optimized, separately. Then, all the goals were optimized together, considering the priority of the goals, and the optimum results were obtained at a Reynolds number of 16906, 25 mm pitch, 8 mm height of winglet and 30° angle of attack, so that vortex-shedding frequencies are maximised. For lower frequencies, optimum conditions occurred at a Reynolds number of 16906 for 75 mm pitch, 8 mm height of winglet and 60° angle of attack.

Suggested Citation

  • Yakut, Kenan & Sahin, Bayram & Celik, Cafer & Alemdaroglu, Nihal & Kurnuc, Aslihan, 2005. "Effects of tapes with double-sided delta-winglets on heat and vortex characteristics," Applied Energy, Elsevier, vol. 80(1), pages 77-95, January.
    • Handle: RePEc:eee:appene:v:80:y:2005:i:1:p:77-95
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(04)00036-4
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yakut, Kenan & Sahin, Bayram, 2004. "Flow-induced vibration analysis of conical rings used for heat transfer enhancement in heat exchangers," Applied Energy, Elsevier, vol. 78(3), pages 273-288, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alam, Tabish & Kim, Man-Hoe, 2018. "A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 813-839.
    2. Zhao, X.B. & Tang, G.H. & Ma, X.W. & Jin, Y. & Tao, W.Q., 2014. "Numerical investigation of heat transfer and erosion characteristics for H-type finned oval tube with longitudinal vortex generators and dimples," Applied Energy, Elsevier, vol. 127(C), pages 93-104.
    3. Ganapathy, T. & Murugesan, K. & Gakkhar, R.P., 2009. "Performance optimization of Jatropha biodiesel engine model using Taguchi approach," Applied Energy, Elsevier, vol. 86(11), pages 2476-2486, November.
    4. Gawande, Vipin B. & Dhoble, A.S. & Zodpe, D.B., 2014. "Effect of roughness geometries on heat transfer enhancement in solar thermal systems – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 347-378.
    5. Sahin, Bayram & Yakut, Kenan & Kotcioglu, Isak & Celik, Cafer, 2005. "Optimum design parameters of a heat exchanger," Applied Energy, Elsevier, vol. 82(1), pages 90-106, September.
    6. Kumar, Raj & Kumar, Anil & Chauhan, Ranchan & Maithani, Rajesh, 2018. "Comparative study of effect of various blockage arrangements on thermal hydraulic performance in a roughened air passage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 447-463.
    7. Ahmed, H.E. & Mohammed, H.A. & Yusoff, M.Z., 2012. "An overview on heat transfer augmentation using vortex generators and nanofluids: Approaches and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5951-5993.
    8. Chamoli, Sunil & Thakur, N.S. & Saini, J.S., 2012. "A review of turbulence promoters used in solar thermal systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3154-3175.
    9. Yakut, Kenan & Alemdaroglu, Nihal & Sahin, Bayram & Celik, Cafer, 2006. "Optimum design-parameters of a heat exchanger having hexagonal fins," Applied Energy, Elsevier, vol. 83(2), pages 82-98, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Younus Hamoudi Assaf & Abdulrazzak Akroot & Hasanain A. Abdul Wahhab & Wadah Talal & Mothana Bdaiwi & Mohammed Y. Nawaf, 2023. "Impact of Nano Additives in Heat Exchangers with Twisted Tapes and Rings to Increase Efficiency: A Review," Sustainability, MDPI, vol. 15(10), pages 1-17, May.
    2. Augusto Della Torre & Gianluca Montenegro & Angelo Onorati & Sumit Khadilkar & Roberto Icarelli, 2019. "Multi-Scale CFD Modeling of Plate Heat Exchangers Including Offset-Strip Fins and Dimple-Type Turbulators for Automotive Applications," Energies, MDPI, vol. 12(15), pages 1-20, August.
    3. Akansu, Selahaddin Orhan, 2006. "Heat transfers and pressure drops for porous-ring turbulators in a circular pipe," Applied Energy, Elsevier, vol. 83(3), pages 280-298, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:80:y:2005:i:1:p:77-95. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.