IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v77y2004i2p131-152.html
   My bibliography  Save this article

Approximate analytical model for two-phase solidification problem in a finned phase-change material storage

Author

Listed:
  • Lamberg, Piia

Abstract

During the phase change in a phase-change material (PCM) storage system, the solid-liquid interface moves away from the heat transfer surface and the surface heat flux decreases due to the increasing thermal resistance of the molten or solidified medium. Heat-transfer enhancement techniques such as fins and honeycombs have to be used to increase the heat-transfer fraction in the store. The purpose of this paper is to develop a simplified analytical model which predicts the solid-liquid interface location and temperature distribution of the fin in the solidification process with a constant end-wall temperature in the finned two-dimensional PCM store. The storage is initially in a liquid state and its temperature is greater than the solidification temperature of the PCM. The analytical results are compared to the numerical results calculated using the heat-capacity method. The results show that the analytical model gives a satisfactory estimation for the fin temperature and the solid-liquid interface when the length-to-height ratio ([lambda]) of the storage cell is smaller than 6.0 and the fin length is smaller than 0.06 m. The error made in the fraction of solidified PCM is ±10% when the analytical model is used rather than the two-dimensional numerical model.

Suggested Citation

  • Lamberg, Piia, 2004. "Approximate analytical model for two-phase solidification problem in a finned phase-change material storage," Applied Energy, Elsevier, vol. 77(2), pages 131-152, February.
    • Handle: RePEc:eee:appene:v:77:y:2004:i:2:p:131-152
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(03)00106-5
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dutil, Yvan & Rousse, Daniel R. & Salah, Nizar Ben & Lassue, Stéphane & Zalewski, Laurent, 2011. "A review on phase-change materials: Mathematical modeling and simulations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 112-130, January.
    2. Campos-Celador, A. & Diarce, G. & González-Pino, I. & Sala, J.M., 2013. "Development and comparative analysis of the modeling of an innovative finned-plate latent heat thermal energy storage system," Energy, Elsevier, vol. 58(C), pages 438-447.
    3. Colella, Francesco & Sciacovelli, Adriano & Verda, Vittorio, 2012. "Numerical analysis of a medium scale latent energy storage unit for district heating systems," Energy, Elsevier, vol. 45(1), pages 397-406.
    4. Saulius Pakalka & Kęstutis Valančius & Giedrė Streckienė, 2021. "Experimental and Theoretical Investigation of the Natural Convection Heat Transfer Coefficient in Phase Change Material (PCM) Based Fin-and-Tube Heat Exchanger," Energies, MDPI, vol. 14(3), pages 1-14, January.
    5. Borreguero, Ana M. & Luz Sánchez, M. & Valverde, José Luis & Carmona, Manuel & Rodríguez, Juan F., 2011. "Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content," Applied Energy, Elsevier, vol. 88(3), pages 930-937, March.
    6. Naghavi, M.S. & Ong, K.S. & Badruddin, I.A. & Mehrali, M. & Silakhori, M. & Metselaar, H.S.C., 2015. "Theoretical model of an evacuated tube heat pipe solar collector integrated with phase change material," Energy, Elsevier, vol. 91(C), pages 911-924.
    7. Yang, Jieren & Chen, Ruirun & Su, Yanqing & Ding, Hongsheng & Guo, Jingjie & Fu, Hengzhi, 2018. "Optimization of electromagnetic energy in cold crucible used for directional solidification of TiAl alloy," Energy, Elsevier, vol. 161(C), pages 143-155.
    8. Agyenim, Francis & Hewitt, Neil & Eames, Philip & Smyth, Mervyn, 2010. "A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(2), pages 615-628, February.
    9. Pitié, F. & Zhao, C.Y. & Baeyens, J. & Degrève, J. & Zhang, H.L., 2013. "Circulating fluidized bed heat recovery/storage and its potential to use coated phase-change-material (PCM) particles," Applied Energy, Elsevier, vol. 109(C), pages 505-513.
    10. Chiu, Justin N.W. & Martin, Viktoria, 2012. "Submerged finned heat exchanger latent heat storage design and its experimental verification," Applied Energy, Elsevier, vol. 93(C), pages 507-516.
    11. Wickramaratne, Chatura & Dhau, Jaspreet S. & Kamal, Rajeev & Myers, Philip & Goswami, D.Y. & Stefanakos, E., 2018. "Macro-encapsulation and characterization of chloride based inorganic Phase change materials for high temperature thermal energy storage systems," Applied Energy, Elsevier, vol. 221(C), pages 587-596.
    12. Yang, Qingyu & Yao, Hui & Yang, Yingying & Azaiez, Mejdi, 2024. "Effect of contact thermal resistance and skeleton thermodynamic properties on solid-liquid phase change heat transfer in porous media: A simulation study," Energy, Elsevier, vol. 300(C).
    13. Jegadheeswaran, S. & Pohekar, Sanjay D., 2009. "Performance enhancement in latent heat thermal storage system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2225-2244, December.
    14. Bazri, Shahab & Badruddin, Irfan Anjum & Naghavi, Mohammad Sajad & Bahiraei, Mehdi, 2018. "A review of numerical studies on solar collectors integrated with latent heat storage systems employing fins or nanoparticles," Renewable Energy, Elsevier, vol. 118(C), pages 761-778.
    15. Cárdenas, Bruno & León, Noel, 2013. "High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 724-737.
    16. Myers, Philip D. & Alam, Tanvir E. & Kamal, Rajeev & Goswami, D.Y. & Stefanakos, E., 2016. "Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer," Applied Energy, Elsevier, vol. 165(C), pages 225-233.
    17. Yang, Moucun & Moghimi, M.A. & Loillier, R. & Markides, C.N. & Kadivar, M., 2023. "Design of a latent heat thermal energy storage system under simultaneous charging and discharging for solar domestic hot water applications," Applied Energy, Elsevier, vol. 336(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:77:y:2004:i:2:p:131-152. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.