IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v147y2015icp386-395.html
   My bibliography  Save this article

Transient simulation of a two-door frost-free refrigerator subjected to periodic door opening and evaporator frosting

Author

Listed:
  • Borges, Bruno N.
  • Melo, Cláudio
  • Hermes, Christian J.L.

Abstract

This paper describes a quasi-steady-state simulation model for predicting the transient behavior of a two-door household refrigerator subjected to periodic door opening and evaporator frosting. A semi-empirical steady-state model was developed for the refrigeration loop, whereas a transient model was devised to predict the energy and mass transfer into and within the refrigerated compartments, and also the frost build-up on the evaporator. The key empirical heat and mass transfer parameters required by the model were derived from a set of experiments performed in-house in a climate-controlled chamber. In general, it was found that the model predictions followed closely the experimental trends for the power consumption (deviations within ±10%) and for the compartment temperatures (deviations within ±2K) when the doors are opened periodically and frost is allowed to accumulate over the evaporator.

Suggested Citation

  • Borges, Bruno N. & Melo, Cláudio & Hermes, Christian J.L., 2015. "Transient simulation of a two-door frost-free refrigerator subjected to periodic door opening and evaporator frosting," Applied Energy, Elsevier, vol. 147(C), pages 386-395.
    • Handle: RePEc:eee:appene:v:147:y:2015:i:c:p:386-395
    DOI: 10.1016/j.apenergy.2015.01.089
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261915001257
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2015.01.089?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Negrão, Cezar O.R. & Hermes, Christian J.L., 2011. "Energy and cost savings in household refrigerating appliances: A simulation-based design approach," Applied Energy, Elsevier, vol. 88(9), pages 3051-3060.
    2. Borges, Bruno N. & Hermes, Christian J.L. & Gonçalves, Joaquim M. & Melo, Cláudio, 2011. "Transient simulation of household refrigerators: A semi-empirical quasi-steady approach," Applied Energy, Elsevier, vol. 88(3), pages 748-754, March.
    3. Hermes, Christian J.L. & Melo, Cláudio & Knabben, Fernando T. & Gonçalves, Joaquim M., 2009. "Prediction of the energy consumption of household refrigerators and freezers via steady-state simulation," Applied Energy, Elsevier, vol. 86(7-8), pages 1311-1319, July.
    4. Mastrullo, R. & Mauro, A.W. & Menna, L. & Palma, A. & Vanoli, G.P., 2014. "Transient model of a vertical freezer with door openings and defrost effects," Applied Energy, Elsevier, vol. 121(C), pages 38-50.
    5. Mahlia, T.M.I. & Saidur, R., 2010. "A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator-freezers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1888-1900, September.
    6. Barbosa Jr., Jader R. & Melo, Cláudio & Hermes, Christian J.L. & Waltrich, Paulo J., 2009. "A study of the air-side heat transfer and pressure drop characteristics of tube-fin [`]no-frost' evaporators," Applied Energy, Elsevier, vol. 86(9), pages 1484-1491, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Harrington, Lloyd & Aye, Lu & Fuller, Bob, 2018. "Impact of room temperature on energy consumption of household refrigerators: Lessons from analysis of field and laboratory data," Applied Energy, Elsevier, vol. 211(C), pages 346-357.
    2. Zheng, Zhuang & Pan, Jia & Huang, Gongsheng & Luo, Xiaowei, 2022. "A bottom-up intra-hour proactive scheduling of thermal appliances for household peak avoiding based on model predictive control," Applied Energy, Elsevier, vol. 323(C).
    3. Christian J. L. Hermes & Joel Boeng & Diogo L. da Silva & Fernando T. Knabben & Andrew D. Sommers, 2021. "Evaporator Frosting in Refrigerating Appliances: Fundamentals and Applications," Energies, MDPI, vol. 14(18), pages 1-23, September.
    4. Piyanut Saengsikhiao & Juntakan Taweekun, 2021. "Energy Efficiency Improvement Solutions for Supermarkets by Low-E Glass Door and Digital Semi-Hermetic Compressor," Energies, MDPI, vol. 14(11), pages 1-11, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Harrington, Lloyd & Aye, Lu & Fuller, Bob, 2018. "Impact of room temperature on energy consumption of household refrigerators: Lessons from analysis of field and laboratory data," Applied Energy, Elsevier, vol. 211(C), pages 346-357.
    2. Mastrullo, R. & Mauro, A.W. & Menna, L. & Palma, A. & Vanoli, G.P., 2014. "Transient model of a vertical freezer with door openings and defrost effects," Applied Energy, Elsevier, vol. 121(C), pages 38-50.
    3. Negrão, Cezar O.R. & Hermes, Christian J.L., 2011. "Energy and cost savings in household refrigerating appliances: A simulation-based design approach," Applied Energy, Elsevier, vol. 88(9), pages 3051-3060.
    4. Qureshi, Bilal A. & Inam, Muhammad & Antar, Mohamed A. & Zubair, Syed M., 2013. "Experimental energetic analysis of a vapor compression refrigeration system with dedicated mechanical sub-cooling," Applied Energy, Elsevier, vol. 102(C), pages 1035-1041.
    5. Chen, Jiayu & Jain, Rishee K. & Taylor, John E., 2013. "Block Configuration Modeling: A novel simulation model to emulate building occupant peer networks and their impact on building energy consumption," Applied Energy, Elsevier, vol. 105(C), pages 358-368.
    6. Belman-Flores, J.M. & Barroso-Maldonado, J.M. & Rodríguez-Muñoz, A.P. & Camacho-Vázquez, G., 2015. "Enhancements in domestic refrigeration, approaching a sustainable refrigerator – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 955-968.
    7. Liu, Guoqiang & Yan, Gang & Yu, Jianlin, 2021. "A review of refrigerator gasket: Development trend, heat and mass transfer characteristics, structure and material optimization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    8. Waltrich, Maicon & Hermes, Christian J.L. & Melo, Cláudio, 2011. "Simulation-based design and optimization of refrigeration cassettes," Applied Energy, Elsevier, vol. 88(12), pages 4756-4765.
    9. Xinhao Hu & Zhongbin Zhang & Dandan Cai, 2020. "A Mathematical Tightening of Instantaneous Indoor and Outdoor Dry-Bulb and Wet-Bulb Temperature Tolerances," Energies, MDPI, vol. 13(6), pages 1-16, March.
    10. Maximilian Lösch & Markus Fallmann & Agnes Poks & Martin Kozek, 2023. "Simulation-Based Sizing of a Secondary Loop Cooling System for a Refrigerated Vehicle," Energies, MDPI, vol. 16(18), pages 1-23, September.
    11. Hossieny, Nemat & Shrestha, Som S. & Owusu, Osei A. & Natal, Manuel & Benson, Rick & Desjarlais, Andre, 2019. "Improving the energy efficiency of a refrigerator-freezer through the use of a novel cabinet/door liner based on polylactide biopolymer," Applied Energy, Elsevier, vol. 235(C), pages 1-9.
    12. Shao, Liang-Liang & Yang, Liang & Zhang, Chun-Lu, 2010. "Comparison of heat pump performance using fin-and-tube and microchannel heat exchangers under frost conditions," Applied Energy, Elsevier, vol. 87(4), pages 1187-1197, April.
    13. Cai, Wei & Liu, Fei & Zhang, Hua & Liu, Peiji & Tuo, Junbo, 2017. "Development of dynamic energy benchmark for mass production in machining systems for energy management and energy-efficiency improvement," Applied Energy, Elsevier, vol. 202(C), pages 715-725.
    14. Mahlia, T.M.I. & Tohno, S. & Tezuka, T., 2012. "A review on fuel economy test procedure for automobiles: Implementation possibilities in Malaysia and lessons for other countries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 4029-4046.
    15. Jain, Manisha & Rao, Anand B. & Patwardhan, Anand, 2018. "Appliance labeling and consumer heterogeneity: A discrete choice experiment in India," Applied Energy, Elsevier, vol. 226(C), pages 213-224.
    16. Wu, H. & Tassou, S.A. & Karayiannis, T.G., 2013. "Modelling and control approaches for energy reduction in continuous frying systems," Applied Energy, Elsevier, vol. 112(C), pages 939-948.
    17. Mahirah Kamaludin & Muhd Azrin Shah Razali & Nazatul Faizah Haron & A. A. Azlina, 2021. "Energy Efficiency Labelling: Investigating Students Preferences and Awareness on the Energy-efficient Electrical Appliances in Hostel," International Journal of Energy Economics and Policy, Econjournals, vol. 11(2), pages 300-308.
    18. Martin Almenta, M. & Morrow, D.J. & Best, R.J. & Fox, B. & Foley, A.M., 2016. "Domestic fridge-freezer load aggregation to support ancillary services," Renewable Energy, Elsevier, vol. 87(P2), pages 954-964.
    19. Silitonga, A.S. & Atabani, A.E. & Mahlia, T.M.I. & Sebayang, A.H., 2011. "Techno-economic analysis and environmental impact of fuel economy labels for passenger cars in Indonesia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 5212-5217.
    20. Safarzadeh, Soroush & Rasti-Barzoki, Morteza & Hejazi, Seyed Reza & Piran, Md Jalil, 2020. "A game theoretic approach for the duopoly pricing of energy-efficient appliances regarding innovation protection and social welfare," Energy, Elsevier, vol. 200(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:147:y:2015:i:c:p:386-395. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.