IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v114y2014icp327-334.html
   My bibliography  Save this article

Modelling and selection of micro-CHP systems for domestic energy supply: The dimension of network-wide primary energy consumption

Author

Listed:
  • Fubara, Tekena Craig
  • Cecelja, Franjo
  • Yang, Aidong

Abstract

Mathematical modelling and optimisation of the Distributed Energy Supply System (DESS) using natural gas, both at the building level and the overall energy supply network level was carried out for three types of micro-combined heat and power (micro-CHP) – solid oxide fuel cells, Stirling engines, internal combustion engines – and for two different operating strategies – cost-driven and primary energy-driven. The modelling framework captures the overall impact of the adoption of micro-CHP systems on the total primary energy usage in both generation and distribution. A detailed case study on the UK domestic energy supply was undertaken by applying both operating strategies to four different sizes of houses. The best technology selected in each case was evaluated in terms of the economics, total primary energy consumption, and reduction of central power generation requirement. It was shown that the primary energy consumption driven option selected technologies which could potentially achieve 6–10% reduction of total primary energy use compared to the base case where micro-CHP was not adopted, which is nearly two times the reduction by the cost-driven strategy.

Suggested Citation

  • Fubara, Tekena Craig & Cecelja, Franjo & Yang, Aidong, 2014. "Modelling and selection of micro-CHP systems for domestic energy supply: The dimension of network-wide primary energy consumption," Applied Energy, Elsevier, vol. 114(C), pages 327-334.
    • Handle: RePEc:eee:appene:v:114:y:2014:i:c:p:327-334
    DOI: 10.1016/j.apenergy.2013.09.069
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261913008167
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2013.09.069?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hawkes, Adam & Leach, Matthew, 2005. "Impacts of temporal precision in optimisation modelling of micro-Combined Heat and Power," Energy, Elsevier, vol. 30(10), pages 1759-1779.
    2. Bianchi, Michele & De Pascale, Andrea & Spina, Pier Ruggero, 2012. "Guidelines for residential micro-CHP systems design," Applied Energy, Elsevier, vol. 97(C), pages 673-685.
    3. Hawkes, A.D. & Leach, M.A., 2007. "Cost-effective operating strategy for residential micro-combined heat and power," Energy, Elsevier, vol. 32(5), pages 711-723.
    4. Barbieri, Enrico Saverio & Melino, Francesco & Morini, Mirko, 2012. "Influence of the thermal energy storage on the profitability of micro-CHP systems for residential building applications," Applied Energy, Elsevier, vol. 97(C), pages 714-722.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Maghanki, Maryam Mohammadi & Ghobadian, Barat & Najafi, Gholamhassan & Galogah, Reza Janzadeh, 2013. "Micro combined heat and power (MCHP) technologies and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 510-524.
    2. Di Somma, M. & Graditi, G. & Heydarian-Forushani, E. & Shafie-khah, M. & Siano, P., 2018. "Stochastic optimal scheduling of distributed energy resources with renewables considering economic and environmental aspects," Renewable Energy, Elsevier, vol. 116(PA), pages 272-287.
    3. Mongibello, Luigi & Bianco, Nicola & Caliano, Martina & Graditi, Giorgio, 2016. "Comparison between two different operation strategies for a heat-driven residential natural gas-fired CHP system: Heat dumping vs. load partialization," Applied Energy, Elsevier, vol. 184(C), pages 55-67.
    4. Löbberding, Laurens & Madlener, Reinhard, 2019. "Techno-economic analysis of micro fuel cell cogeneration and storage in Germany," Applied Energy, Elsevier, vol. 235(C), pages 1603-1613.
    5. Chesi, Andrea & Ferrara, Giovanni & Ferrari, Lorenzo & Magnani, Sandro & Tarani, Fabio, 2013. "Influence of the heat storage size on the plant performance in a Smart User case study," Applied Energy, Elsevier, vol. 112(C), pages 1454-1465.
    6. Alahäivälä, Antti & Heß, Tobias & Cao, Sunliang & Lehtonen, Matti, 2015. "Analyzing the optimal coordination of a residential micro-CHP system with a power sink," Applied Energy, Elsevier, vol. 149(C), pages 326-337.
    7. Wakui, Tetsuya & Yokoyama, Ryohei, 2012. "Optimal sizing of residential SOFC cogeneration system for power interchange operation in housing complex from energy-saving viewpoint," Energy, Elsevier, vol. 41(1), pages 65-74.
    8. Hawkes, A.D. & Leach, M.A., 2008. "On policy instruments for support of micro combined heat and power," Energy Policy, Elsevier, vol. 36(8), pages 2963-2972, August.
    9. Ondeck, Abigail D. & Edgar, Thomas F. & Baldea, Michael, 2015. "Optimal operation of a residential district-level combined photovoltaic/natural gas power and cooling system," Applied Energy, Elsevier, vol. 156(C), pages 593-606.
    10. Chaduvula, Hemanth & Das, Debapriya, 2023. "Analysis of microgrid configuration with optimal power injection from grid using point estimate method embedded fuzzy-particle swarm optimization," Energy, Elsevier, vol. 282(C).
    11. Dominik Kryzia & Marta Kuta & Dominika Matuszewska & Piotr Olczak, 2020. "Analysis of the Potential for Gas Micro-Cogeneration Development in Poland Using the Monte Carlo Method," Energies, MDPI, vol. 13(12), pages 1-24, June.
    12. Adam, Alexandros & Fraga, Eric S. & Brett, Dan J.L., 2018. "A modelling study for the integration of a PEMFC micro-CHP in domestic building services design," Applied Energy, Elsevier, vol. 225(C), pages 85-97.
    13. Morini, Mirko & Pinelli, Michele & Spina, Pier Ruggero & Venturini, Mauro, 2013. "Optimal allocation of thermal, electric and cooling loads among generation technologies in household applications," Applied Energy, Elsevier, vol. 112(C), pages 205-214.
    14. Di Somma, M. & Yan, B. & Bianco, N. & Graditi, G. & Luh, P.B. & Mongibello, L. & Naso, V., 2017. "Multi-objective design optimization of distributed energy systems through cost and exergy assessments," Applied Energy, Elsevier, vol. 204(C), pages 1299-1316.
    15. Murugan, S. & Horák, Bohumil, 2016. "A review of micro combined heat and power systems for residential applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 144-162.
    16. Anvari, Simin & Desideri, Umberto & Taghavifar, Hadi, 2020. "Design of a combined power, heating and cooling system at sized and undersized configurations for a reference building: Technoeconomic and topological considerations in Iran and Italy," Applied Energy, Elsevier, vol. 258(C).
    17. Mongibello, Luigi & Bianco, Nicola & Caliano, Martina & Graditi, Giorgio, 2015. "Influence of heat dumping on the operation of residential micro-CHP systems," Applied Energy, Elsevier, vol. 160(C), pages 206-220.
    18. Wakui, Tetsuya & Yokoyama, Ryohei & Tamura, Itaru & Kegasa, Akeshi, 2009. "Effect of power interchange operation of multiple household gas engine cogeneration systems on energy-saving," Energy, Elsevier, vol. 34(12), pages 2092-2100.
    19. Martínez-Lera, S. & Ballester, J. & Martínez-Lera, J., 2013. "Analysis and sizing of thermal energy storage in combined heating, cooling and power plants for buildings," Applied Energy, Elsevier, vol. 106(C), pages 127-142.
    20. Pérez-Iribarren, E. & González-Pino, I. & Azkorra-Larrinaga, Z. & Gómez-Arriarán, I., 2020. "Optimal design and operation of thermal energy storage systems in micro-cogeneration plants," Applied Energy, Elsevier, vol. 265(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:114:y:2014:i:c:p:327-334. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.