IDEAS home Printed from https://ideas.repec.org/a/caa/jnlrae/v61y2015i2id61-2013-rae.html
   My bibliography  Save this article

Evaluation of selected properties of briquettes from recovered paper and board

Author

Listed:
  • M. Brožek

    (Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic)

Abstract

Worldwide increasing energy demand is today permanently covered by a majority of non-renewable energy sources, namely by coal, crude oil and natural gas. This causes the rapid decline of their reserves and the time gets near when they will be run out. Therefore in the last years the exploitation of renewable energy sources has been permanently preferred. One of alternative fuel forms is fuel on the basis of paper waste. In this paper the results of tests are published, which were carried out using six sorts of recovered paper and board (group and grade 1.05, 1.06, 2.02, 2.05, 2.07 and 2.08 according to CSN EN 643:2002), pressed into the form of briquettes. During the tests following briquettes parameters were watched: moisture content, ash amount, gross calorific value, length and diameter, weight, density, rupture force and mechanical durability. It was proved that briquettes made from recovered paper and board compared with briquettes from wood waste are of high density, high mechanical durability and for their rupture, relatively high force is necessary. But at the same time they have high ash amount and low gross calorific value.

Suggested Citation

  • M. Brožek, 2015. "Evaluation of selected properties of briquettes from recovered paper and board," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 61(2), pages 66-71.
  • Handle: RePEc:caa:jnlrae:v:61:y:2015:i:2:id:61-2013-rae
    DOI: 10.17221/61/2013-RAE
    as

    Download full text from publisher

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/61/2013-RAE.html
    Download Restriction: free of charge

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/61/2013-RAE.pdf
    Download Restriction: free of charge

    File URL: https://libkey.io/10.17221/61/2013-RAE?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. D. Plíštil & M. Brožek & J. Malaťák & P. Heneman, 2004. "Heating briquettes from energy crops," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 50(4), pages 136-139.
    2. D. Plíštil & M. Brožek & J. Malaťák & A. Roy & P. Hutla, 2005. "Mechanical characteristics of standard fuel briquettes on biomass basis," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 51(2), pages 66-72.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Oluwaseyi Kayode Fadele & Temiloluwa Ojuolape Amusan & Ademola Olagoke Afolabi & Clement Adesoji Ogunlade, 2021. "Characterisation of briquettes from forest wastes: Optimisation approach," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 67(3), pages 138-147.
    2. M. Brožek, 2013. "Study of briquette properties at their long-time storage," Journal of Forest Science, Czech Academy of Agricultural Sciences, vol. 59(3), pages 101-106.
    3. R. Koutný & B. Čechová & P. Hutla & P. Jevič, 2007. "Properties of heat briquettes on basis of cotton processing waste," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 53(2), pages 39-46.
    4. D. Herák & A. Kabutey & A. Sedláček & G. Gűrdil, 2011. "Tangent curve utilization for description of mechanical behaviour of pressed mixture," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 57(1), pages 13-18.
    5. M. Brožek & A. Nováková & M. Kolářová, 2012. "Quality evaluation of briquettes made from wood waste," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 58(1), pages 30-35.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:caa:jnlrae:v:61:y:2015:i:2:id:61-2013-rae. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Ivo Andrle (email available below). General contact details of provider: https://www.cazv.cz/en/home/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.