IDEAS home Printed from https://ideas.repec.org/a/bla/inecol/v26y2022i4p1487-1503.html
   My bibliography  Save this article

Quo vadis MFA? Integrated material flow analysis to support material efficiency

Author

Listed:
  • Joris Baars
  • Mohammad Ali Rajaeifar
  • Oliver Heidrich

Abstract

Material efficiency (ME) strategies are pursued by governments and companies to reduce environmental emissions, improve supply chain resilience, and enhance cost competitiveness. Material flow analysis (MFA) methods are useful to quantify raw material stocks and flows and assess the potential impacts of ME strategies. Although the popularity of MFA methods is increasing, there are methodological limitations that hinder its use as a decision support tool for prospective assessments. To overcome some of these, MFA is increasingly integrated with other methods from different research fields. This paper categorizes integrated MFA methods by identifying and explaining the methods and their applications. A semi‐structured literature review screened a wide range of methods integrated with MFA prospective analysis and evaluated their applications from 158 studies. This showed that integrated MFA can be used to: (1) include economic, social, and environmental layers; (2) improve the technical foundation of MFA by including entropy and exergy analyses and process engineering methods; (3) include economic mechanisms and link the economic system to the material system; and (4) improve the representation of materials in existing methods and models. Our research demonstrates that integrated MFA should be a central method in planning and designing ME strategies for companies and governments. This paper provides an important knowledge base of integrated MFA methods and creates a discussion point on MFA, where the research field is currently at or indeed where it could be heading in the future, that is, “Quo Vadis” MFA.

Suggested Citation

  • Joris Baars & Mohammad Ali Rajaeifar & Oliver Heidrich, 2022. "Quo vadis MFA? Integrated material flow analysis to support material efficiency," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1487-1503, August.
    • Handle: RePEc:bla:inecol:v:26:y:2022:i:4:p:1487-1503
    DOI: 10.1111/jiec.13288
    as

    Download full text from publisher

    File URL: https://doi.org/10.1111/jiec.13288
    Download Restriction: no
    File URL: https://libkey.io/10.1111/jiec.13288?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Helias Udo de Haes & Reinout Heijungs & Gjalt Huppes & Ester van der Voet & Jean‐Paul Hettelingh, 2000. "Full Mode and Attribution Mode in Environmental Analysis," Journal of Industrial Ecology, Yale University, vol. 4(1), pages 45-56, January.
    2. Fernandez-Mena, Hugo & Gaudou, Benoit & Pellerin, Sylvain & MacDonald, Graham K. & Nesme, Thomas, 2020. "Flows in Agro-food Networks (FAN): An agent-based model to simulate local agricultural material flows," Agricultural Systems, Elsevier, vol. 180(C).
    3. Rechberger, H. & Graedel, T. E., 2002. "The contemporary European copper cycle: statistical entropy analysis," Ecological Economics, Elsevier, vol. 42(1-2), pages 59-72, August.
    4. Eric Masanet & Niko Heeren & Shigemi Kagawa & Jonathan Cullen & Reid Lifset & Richard Wood, 2021. "Material efficiency for climate change mitigation," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 254-259, April.
    5. Stefan Pauliuk & Anders Arvesen & Konstantin Stadler & Edgar G. Hertwich, 2017. "Industrial ecology in integrated assessment models," Nature Climate Change, Nature, vol. 7(1), pages 13-20, January.
    6. Stefan Pauliuk & Guillaume Majeau-Bettez & Daniel B. Müller, 2015. "A General System Structure and Accounting Framework for Socioeconomic Metabolism," Journal of Industrial Ecology, Yale University, vol. 19(5), pages 728-741, October.
    7. Niko Heeren & Stefanie Hellweg, 2019. "Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 253-267, February.
    8. Andrew McCarthy & Rob Dellink & Ruben Bibas, 2018. "The Macroeconomics of the Circular Economy Transition: A Critical Review of Modelling Approaches," OECD Environment Working Papers 130, OECD Publishing.
    9. Peter L. Daniels & Stephen Moore, 2001. "Approaches for Quantifying the Metabolism of Physical Economies: Part I: Methodological Overview," Journal of Industrial Ecology, Yale University, vol. 5(4), pages 69-93, October.
    10. Grames, Johanna & Zoboli, Ottavia & Laner, David & Rechberger, Helmut & Zessner, Matthias & Sánchez-Romero, Miguel & Prskawetz, Alexia, 2019. "Understanding feedbacks between economic decisions and the phosphorus resource cycle: A general equilibrium model including material flows," Resources Policy, Elsevier, vol. 61(C), pages 311-347.
    11. Schwarz, Hans-Gunter, 2006. "Economic materials-product chain models: Current status, further development and an illustrative example," Ecological Economics, Elsevier, vol. 58(2), pages 373-392, June.
    12. Snyder, Hannah, 2019. "Literature review as a research methodology: An overview and guidelines," Journal of Business Research, Elsevier, vol. 104(C), pages 333-339.
    13. Lessard, Jean-Martin & Habert, Guillaume & Tagnit-Hamou, Arezki & Amor, Ben, 2021. "A time-series material-product chain model extended to a multiregional industrial symbiosis: The case of material circularity in the cement sector," Ecological Economics, Elsevier, vol. 179(C).
    14. Riddle, Matthew & Macal, Charles M. & Conzelmann, Guenter & Combs, Todd E. & Bauer, Diana & Fields, Fletcher, 2015. "Global critical materials markets: An agent-based modeling approach," Resources Policy, Elsevier, vol. 45(C), pages 307-321.
    15. Choi, Chul Hun & Cao, Jinjian & Zhao, Fu, 2016. "System Dynamics Modeling of Indium Material Flows under Wide Deployment of Clean Energy Technologies," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 59-71.
    16. Bouman, Mathijs & Heijungs, Reinout & van der Voet, Ester & van den Bergh, Jeroen C. J. M. & Huppes, Gjalt, 2000. "Material flows and economic models: an analytical comparison of SFA, LCA and partial equilibrium models," Ecological Economics, Elsevier, vol. 32(2), pages 195-216, February.
    17. Greenfield, Aaron & Graedel, T.E., 2013. "The omnivorous diet of modern technology," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 1-7.
    18. Max Marwede & Armin Reller, 2014. "Estimation of Life Cycle Material Costs of Cadmium Telluride– and Copper Indium Gallium Diselenide–Photovoltaic Absorber Materials based on Life Cycle Material Flows," Journal of Industrial Ecology, Yale University, vol. 18(2), pages 254-267, April.
    19. Edward J Manderson & Timothy J Considine, 2018. "An Economic Perspective on Industrial Ecology," Review of Environmental Economics and Policy, Association of Environmental and Resource Economists, vol. 12(2), pages 304-323.
    20. Kandelaars, Patricia P. A. A. H. & van den Bergh, Jeroen C. J. M., 1997. "Dynamic analysis of materials-product chains: An application to window frames," Ecological Economics, Elsevier, vol. 22(1), pages 41-61, July.
    21. Pothen, Frank, 2013. "The metal resources (METRO) model: A dynamic partial equilibrium model for metal markets applied to rare earth elements," ZEW Discussion Papers 13-112, ZEW - Leibniz Centre for European Economic Research.
    22. Jeltsje de Kraker & Katarzyna Kujawa-Roeleveld & Marcelo J. Villena & Claudia Pabón-Pereira, 2019. "Decentralized Valorization of Residual Flows as an Alternative to the Traditional Urban Waste Management System: The Case of Peñalolén in Santiago de Chile," Sustainability, MDPI, vol. 11(22), pages 1-26, November.
    23. Skelton, Alexandra C.H. & Paroussos, Leonidas & Allwood, Julian M., 2020. "Comparing energy and material efficiency rebound effects: an exploration of scenarios in the GEM-E3 macroeconomic model," Ecological Economics, Elsevier, vol. 173(C).
    24. Mario Schmidt & Michiyasu Nakajima, 2013. "Material Flow Cost Accounting as an Approach to Improve Resource Efficiency in Manufacturing Companies," Resources, MDPI, vol. 2(3), pages 1-12, September.
    25. Vered Blass & Charles J. Corbett, 2018. "Same Supply Chain, Different Models: Integrating Perspectives from Life Cycle Assessment and Supply Chain Management," Journal of Industrial Ecology, Yale University, vol. 22(1), pages 18-30, February.
    26. Paul Wolfram & Qingshi Tu & Niko Heeren & Stefan Pauliuk & Edgar G. Hertwich, 2021. "Material efficiency and climate change mitigation of passenger vehicles," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 494-510, April.
    27. Florian Flachenecker & Raimund Bleischwitz & Jun E. Rentschler, 2017. "Investments in material efficiency: the introduction and application of a comprehensive cost–benefit framework," Journal of Environmental Economics and Policy, Taylor & Francis Journals, vol. 6(2), pages 107-120, April.
    28. Raimund Bleischwitz, 2010. "International economics of resource productivity – Relevance, measurement, empirical trends, innovation, resource policies," International Economics and Economic Policy, Springer, vol. 7(2), pages 227-244, August.
    29. David Rochat & Claudia R. Binder & Jaime Diaz & Olivier Jolliet, 2013. "Combining Material Flow Analysis, Life Cycle Assessment, and Multiattribute Utility Theory," Journal of Industrial Ecology, Yale University, vol. 17(5), pages 642-655, October.
    30. Laner, David & Rechberger, Helmut, 2007. "Treatment of cooling appliances: Interrelations between environmental protection, resource conservation, and recovery rates," Resources, Conservation & Recycling, Elsevier, vol. 52(1), pages 136-155.
    31. Wiedenhofer, Dominik & Fishman, Tomer & Lauk, Christian & Haas, Willi & Krausmann, Fridolin, 2019. "Integrating Material Stock Dynamics Into Economy-Wide Material Flow Accounting: Concepts, Modelling, and Global Application for 1900–2050," Ecological Economics, Elsevier, vol. 156(C), pages 121-133.
    32. Daniel R. Cooper & Nicole A. Ryan & Kyle Syndergaard & Yongxian Zhu, 2020. "The potential for material circularity and independence in the U.S. steel sector," Journal of Industrial Ecology, Yale University, vol. 24(4), pages 748-762, August.
    33. Augiseau, Vincent & Barles, Sabine, 2017. "Studying construction materials flows and stock: A review," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 153-164.
    34. Dimitra Ioannidou & Niko Heeren & Guido Sonnemann & Guillaume Habert, 2019. "The future in and of criticality assessments," Journal of Industrial Ecology, Yale University, vol. 23(4), pages 751-766, August.
    35. Thomas Beaussier & Sylvain Caurla & Véronique Bellon Maurel & Eléonore Loiseau, 2019. "Coupling economic models and environmental assessment methods to support regional policies : A critical review," Post-Print hal-02021423, HAL.
    36. Alexandre Charpentier Poncelet & Christoph Helbig & Philippe Loubet & Antoine Beylot & Stéphanie Muller & Jacques Villeneuve & Bertrand Laratte & Andrea Thorenz & Axel Tuma & Guido Sonnemann, 2021. "Life cycle impact assessment methods for estimating the impacts of dissipative flows of metals," Journal of Industrial Ecology, Yale University, vol. 25(5), pages 1177-1193, October.
    37. Matthew Winning & Alvaro Calzadilla & Raimund Bleischwitz & Victor Nechifor, 2017. "Towards a circular economy: insights based on the development of the global ENGAGE-materials model and evidence for the iron and steel industry," International Economics and Economic Policy, Springer, vol. 14(3), pages 383-407, July.
    38. Rissman, Jeffrey & Bataille, Chris & Masanet, Eric & Aden, Nate & Morrow, William R. & Zhou, Nan & Elliott, Neal & Dell, Rebecca & Heeren, Niko & Huckestein, Brigitta & Cresko, Joe & Miller, Sabbie A., 2020. "Technologies and policies to decarbonize global industry: Review and assessment of mitigation drivers through 2070," Applied Energy, Elsevier, vol. 266(C).
    39. Ekins, Paul & Pollitt, Hector & Summerton, Philip & Chewpreecha, Unnada, 2012. "Increasing carbon and material productivity through environmental tax reform," Energy Policy, Elsevier, vol. 42(C), pages 365-376.
    40. Huang, Chu-Long & Vause, Jonathan & Ma, Hwong-Wen & Yu, Chang-Ping, 2012. "Using material/substance flow analysis to support sustainable development assessment: A literature review and outlook," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 104-116.
    41. L. Andrew Bollinger & Chris Davis & Igor Nikolić & Gerard P.J. Dijkema, 2012. "Modeling Metal Flow Systems," Journal of Industrial Ecology, Yale University, vol. 16(2), pages 176-190, April.
    42. Paul H. Brunner, 2002. "Beyond Materials Flow Analysis," Journal of Industrial Ecology, Yale University, vol. 6(1), pages 8-10, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Anna Christy & Marwa Elnahass & Jaime Amezaga & Anthony Browne & Oliver Heidrich, 2024. "A dynamic framework to align company climate reporting and action with global climate targets," Business Strategy and the Environment, Wiley Blackwell, vol. 33(4), pages 3103-3128, May.
    2. Dhiya Durani Sofian Azizi & Marlia M. Hanafiah & Kok Sin Woon, 2023. "Material Flow Analysis in WEEE Management for Circular Economy: A Content Review on Applications, Limitations, and Future Outlook," Sustainability, MDPI, vol. 15(4), pages 1-22, February.
    3. Paula M. Wenzel & Peter Radgen, 2023. "Extending effectiveness to efficiency: Comparing energy and environmental assessment methods for a wet cooling tower," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 693-706, June.
    4. Neill Bartie & Lucero Cobos‐Becerra & Florian Mathies & Janardan Dagar & Eva Unger & Magnus Fröhling & Markus A. Reuter & Rutger Schlatmann, 2023. "Cost versus environment? Combined life cycle, techno‐economic, and circularity assessment of silicon‐ and perovskite‐based photovoltaic systems," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 993-1007, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lessard, Jean-Martin & Habert, Guillaume & Tagnit-Hamou, Arezki & Amor, Ben, 2021. "A time-series material-product chain model extended to a multiregional industrial symbiosis: The case of material circularity in the cement sector," Ecological Economics, Elsevier, vol. 179(C).
    2. Edgar Battand Towa Kouokam & Vanessa Zeller & Wouter Achten, 2019. "Input-output models and waste management analysis: A critical review," ULB Institutional Repository 2013/359535, ULB -- Universite Libre de Bruxelles.
    3. Stefan Pauliuk & Tomer Fishman & Niko Heeren & Peter Berrill & Qingshi Tu & Paul Wolfram & Edgar G. Hertwich, 2021. "Linking service provision to material cycles: A new framework for studying the resource efficiency–climate change (RECC) nexus," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 260-273, April.
    4. Alessio Miatto & Claudia Sartori & Martina Bianchi & Paolo Borin & Andrea Giordano & Shoshanna Saxe & T.E. Graedel, 2022. "Tracking the material cycle of Italian bricks with the aid of building information modeling," Journal of Industrial Ecology, Yale University, vol. 26(2), pages 609-626, April.
    5. Schwarz, Hans-Gunter, 2006. "Economic materials-product chain models: Current status, further development and an illustrative example," Ecological Economics, Elsevier, vol. 58(2), pages 373-392, June.
    6. Karan Bhuwalka & Randolph E. Kirchain & Elsa A. Olivetti & Richard Roth, 2023. "Quantifying the drivers of long‐term prices in materials supply chains," Journal of Industrial Ecology, Yale University, vol. 27(1), pages 141-154, February.
    7. Le Boulzec, Hugo & Delannoy, Louis & Andrieu, Baptiste & Verzier, François & Vidal, Olivier & Mathy, Sandrine, 2022. "Dynamic modeling of global fossil fuel infrastructure and materials needs: Overcoming a lack of available data," Applied Energy, Elsevier, vol. 326(C).
    8. Yue Ren & Xin Sun & Paul Wolfram & Shaoqiong Zhao & Xu Tang & Yifei Kang & Dongchang Zhao & Xinzhu Zheng, 2023. "Hidden delays of climate mitigation benefits in the race for electric vehicle deployment," Nature Communications, Nature, vol. 14(1), pages 1-12, December.
    9. Vita, Gibran & Lundström, Johan R. & Hertwich, Edgar G. & Quist, Jaco & Ivanova, Diana & Stadler, Konstantin & Wood, Richard, 2019. "The Environmental Impact of Green Consumption and Sufficiency Lifestyles Scenarios in Europe: Connecting Local Sustainability Visions to Global Consequences," Ecological Economics, Elsevier, vol. 164(C), pages 1-1.
    10. Carlos Pablo Sigüenza & Bernhard Steubing & Arnold Tukker & Glenn A. Aguilar‐Hernández, 2021. "The environmental and material implications of circular transitions: A diffusion and product‐life‐cycle‐based modeling framework," Journal of Industrial Ecology, Yale University, vol. 25(3), pages 563-579, June.
    11. Maxwell Woody & Michael T. Craig & Parth T. Vaishnav & Geoffrey M. Lewis & Gregory A. Keoleian, 2022. "Optimizing future cost and emissions of electric delivery vehicles," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 1108-1122, June.
    12. Porcelli, Roberto & Gibon, Thomas & Marazza, Diego & Righi, Serena & Rugani, Benedetto, 2023. "Prospective environmental impact assessment and simulation applied to an emerging biowaste-based energy technology in Europe," Renewable and Sustainable Energy Reviews, Elsevier, vol. 176(C).
    13. Yupeng Liu & Jiajia Li & Wei‐Qiang Chen & Lulu Song & Shaoqing Dai, 2022. "Quantifying urban mass gain and loss by a GIS‐based material stocks and flows analysis," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 1051-1060, June.
    14. Carine Lausselet & Johana Paola Forero Urrego & Eirik Resch & Helge Brattebø, 2021. "Temporal analysis of the material flows and embodied greenhouse gas emissions of a neighborhood building stock," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 419-434, April.
    15. Alzaghrini, Nadine & Milovanoff, Alexandre & Roy, Riddhiman & Abdul-Manan, Amir F.N. & McKechnie, Jon & Posen, I. Daniel & MacLean, Heather L., 2024. "Closing the GHG mitigation gap with measures targeting conventional gasoline light-duty vehicles – A scenario-based analysis of the U.S. fleet," Applied Energy, Elsevier, vol. 359(C).
    16. Liu, Fangying & Su, Chi Wei & Tao, Ran & Qin, Meng & Umar, Muhammad, 2024. "Fintech and aluminium: Strategic enablers of climate change mitigation and sustainable mineral policy," Resources Policy, Elsevier, vol. 91(C).
    17. Stefan Pauliuk & Niko Heeren, 2020. "ODYM—An open software framework for studying dynamic material systems: Principles, implementation, and data structures," Journal of Industrial Ecology, Yale University, vol. 24(3), pages 446-458, June.
    18. Kaixin Huang & Matthew J. Eckelman, 2022. "Appending material flows to the National Energy Modeling System (NEMS) for projecting the physical economy of the United States," Journal of Industrial Ecology, Yale University, vol. 26(1), pages 294-308, February.
    19. Ta-Thi Huong & Liang Dong & Izhar Hussain Shah & Hung-Suck Park, 2021. "Exploring the Sustainability of Resource Flow and Productivity Transition in Vietnam from 1978 to 2017: MFA and DEA-Based Malmquist Productivity Index Approach," Sustainability, MDPI, vol. 13(21), pages 1-26, October.
    20. Lukas Folkens & Petra Schneider, 2022. "Responsible Carbon Resource Management through Input-Oriented Cap and Trade (IOCT)," Sustainability, MDPI, vol. 14(9), pages 1-17, May.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:bla:inecol:v:26:y:2022:i:4:p:1487-1503. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: http://www.blackwellpublishing.com/journal.asp?ref=1088-1980 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.