IDEAS home Printed from https://ideas.repec.org/a/baq/taprar/v6y2023i3p12-17.html
   My bibliography  Save this article

Characteristics of black liquor after alkaline delignification of paulownia wood

Author

Listed:
  • Anna Denysenko

    (National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»)

  • Romaniia Cheropkina

    (National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»)

Abstract

The object of research is the black liquor of the alkaline pulping sample Paulownia Clone in Vitro 112® with active alkali consumption of 14, 18 and 22 % in Na2O units from the mass of completely dry raw materials.The problem solved in the work is related to the formation of waste in the form of black liquor during pulp production. It is noted that as a result of the production of 1 ton of cellulose, up to 7 tons of black liquor is formed.In the course of the work, an analysis of the total titrated and active alkalinity in the white and black liquor after cooking paulownia wood was carried out, and the pH value was determined. The dependence of the content of dry substances in black liquor on the consumption of active alkali, the duration of cooking, the presence of a catalyst, and the final temperature of the delignification process is given. The amount of organic and mineral components of dry substances of black liquor per 1 ton of air-dry fibrous semi-finished products was calculated.It was established that with an increase in temperature by 20 °C (from 150 to 170 °C) and a duration of approximately 1.5 times (from 60 to 90 min and from 90 to 150 min), with the same consumption of active alkali and the use of a catalyst in the conditions after sodium pulping, the content of dry substances in the black liquor increases by 1.5–3 %. This regularity is explained by the transition into the solution of a greater number of dissolution products of lignin, hemicelluloses, and mineral substances.Estimated values for the content of mineral and organic substances in black liquor after cooking paulownia wood for a duration of 150 min and a final temperature of 170 °C at different consumptions of active alkali and the use of catalysts in the form of anthraquinone and ethyl alcohol are within the range of 1024-1518 kg per 1 ton dry pulps of normal yield and can be used in practice. The obtained results can be used to form an assessment of the black liquor as an additional resource potential for the economy of production.

Suggested Citation

  • Anna Denysenko & Romaniia Cheropkina, 2023. "Characteristics of black liquor after alkaline delignification of paulownia wood," Technology audit and production reserves, PC TECHNOLOGY CENTER, vol. 6(3(74)), pages 12-17, December.
    • Handle: RePEc:baq:taprar:v:6:y:2023:i:3:p:12-17
    DOI: 10.15587/2706-5448.2023.293363
    as

    Download full text from publisher

    File URL: https://journals.uran.ua/tarp/article/download/293363/287383
    Download Restriction: no
    File URL: https://libkey.io/10.15587/2706-5448.2023.293363?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Katja Kuparinen & Esa Vakkilainen & Tero Tynjälä, 2019. "Biomass-based carbon capture and utilization in kraft pulp mills," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 24(7), pages 1213-1230, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jussi Saari & Ekaterina Sermyagina & Juha Kaikko & Markus Haider & Marcelo Hamaguchi & Esa Vakkilainen, 2021. "Evaluation of the Energy Efficiency Improvement Potential through Back-End Heat Recovery in the Kraft Recovery Boiler," Energies, MDPI, vol. 14(6), pages 1-21, March.
    2. Jussi Saari & Petteri Peltola & Katja Kuparinen & Juha Kaikko & Ekaterina Sermyagina & Esa Vakkilainen, 2023. "Novel BECCS implementation integrating chemical looping combustion with oxygen uncoupling and a kraft pulp mill cogeneration plant," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 28(4), pages 1-26, April.
    3. Nwaoha, Chikezie & Tontiwachwuthikul, Paitoon, 2019. "Carbon dioxide capture from pulp mill using 2-amino-2-methyl-1-propanol and monoethanolamine blend: Techno-economic assessment of advanced process configuration," Applied Energy, Elsevier, vol. 250(C), pages 1202-1216.
    4. Jagu Schippers, Emma & Massol, Olivier, 2022. "Unlocking CO2 infrastructure deployment: The impact of carbon removal accounting," Energy Policy, Elsevier, vol. 171(C).
    5. Furszyfer Del Rio, Dylan D. & Sovacool, Benjamin K. & Griffiths, Steve & Bazilian, Morgan & Kim, Jinsoo & Foley, Aoife M. & Rooney, David, 2022. "Decarbonizing the pulp and paper industry: A critical and systematic review of sociotechnical developments and policy options," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    6. Bello, Sara & Galán-Martín, Ángel & Feijoo, Gumersindo & Moreira, Maria Teresa & Guillén-Gosálbez, Gonzalo, 2020. "BECCS based on bioethanol from wood residues: Potential towards a carbon-negative transport and side-effects," Applied Energy, Elsevier, vol. 279(C).
    7. Vadim Fetisov & Adam M. Gonopolsky & Maria Yu. Zemenkova & Schipachev Andrey & Hadi Davardoost & Amir H. Mohammadi & Masoud Riazi, 2023. "On the Integration of CO 2 Capture Technologies for an Oil Refinery," Energies, MDPI, vol. 16(2), pages 1-19, January.
    8. Jussi Saari & Ekaterina Sermyagina & Katja Kuparinen & Satu Lipiäinen & Juha Kaikko & Marcelo Hamaguchi & Clara Mendoza-Martinez, 2022. "Improving Kraft Pulp Mill Energy Efficiency through Low-Temperature Hydrothermal Carbonization of Biological Sludge," Energies, MDPI, vol. 15(17), pages 1-16, August.
    9. Katja Kuparinen & Satu Lipiäinen & Esa Vakkilainen & Timo Laukkanen, 2023. "Effect of biomass-based carbon capture on the sustainability and economics of pulp and paper production in the Nordic mills," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(1), pages 648-668, January.
    10. Lim, Jonghun & Kim, Junghwan, 2022. "Optimizing ash deposit removal system to maximize biomass recycling as renewable energy for CO2 reduction," Renewable Energy, Elsevier, vol. 190(C), pages 1006-1017.
    11. Satu Lipiäinen & Esa Vakkilainen, 2021. "Role of the Finnish forest industry in mitigating global change: energy use and greenhouse gas emissions towards 2035," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 26(2), pages 1-19, February.
    12. Bogdanov, Dmitrii & Gulagi, Ashish & Fasihi, Mahdi & Breyer, Christian, 2021. "Full energy sector transition towards 100% renewable energy supply: Integrating power, heat, transport and industry sectors including desalination," Applied Energy, Elsevier, vol. 283(C).
    13. Adolfo Carvallo & Mabel Vega-Coloma, 2024. "Environmental Life Cycle Assessment of Bleached Pulp from Eucalyptus: Chilean Case," Sustainability, MDPI, vol. 16(21), pages 1-18, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:baq:taprar:v:6:y:2023:i:3:p:12-17. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Iryna Prudius (email available below). General contact details of provider: https://journals.uran.ua/tarp/issue/archive .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.