IDEAS home Printed from https://ideas.repec.org/a/apb/jaterr/2018p27-36.html
   My bibliography  Save this article

Effects of cutting speed on tool nose wear with ACE-MQL aerosol at optimum-temperature

Author

Listed:
  • S. W. M. A. I. Senevirathne

    (Department of Mechanical Engineering, University of Moratuwa, Moratuwa, Sri Lanka)

  • R. K. P. S. Ranaweera

    (Department of Mechanical Engineering, University of Moratuwa, Moratuwa, Sri Lanka)

Abstract

This study is focused on evaluating newly developed chilled-emulsion Minimum Quantity Lubrication (MQL) method on machining hard-to-cut metals. Previous research work revealed that, aerosol at 150C provides the optimal tool life and generates the least surface roughness when machining AISI P20 and D2 tool steels at a given cutting speed. In that context, the influence of varying cutting speeds with MQL aerosol at 15 0C is further studied in this paper. Three cutting speeds were used as per the tool manufacturer’s recommendations. For the aforementioned cutting conditions, tool nose wear were measured and topologies of worn cutting edges were observed and compared. The experimental results revealed that tool wear rate and other forms of damages such as chipping and plastic deformation for different work material have contrasting responses. This indicates that MQL aerosol performance is notably sensitive to work material properties and its benefits as a cutting fluid should be further investigated over wider range of materials.

Suggested Citation

  • S. W. M. A. I. Senevirathne & R. K. P. S. Ranaweera, 2018. "Effects of cutting speed on tool nose wear with ACE-MQL aerosol at optimum-temperature," Journal of Advances in Technology and Engineering Research, A/Professor Akbar A. Khatibi, vol. 4(1), pages 27-36.
  • Handle: RePEc:apb:jaterr:2018:p:27-36
    DOI: 10.20474/jater-4.1.4
    as

    Download full text from publisher

    File URL: https://tafpublications.com/platform/Articles/full-jater4.1.4.php
    Download Restriction: no

    File URL: https://tafpublications.com/gip_content/paper/Jater-4.1.4.pdf
    Download Restriction: no

    File URL: https://libkey.io/10.20474/jater-4.1.4?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Mohamed Abduelmula & Martin Birkett & Chris Connor, 2017. "A Mixed Method Approach to Investigate the Lack of Lean Manufacturing Implementation in Libya," International Journal of Technology and Engineering Studies, PROF.IR.DR.Mohid Jailani Mohd Nor, vol. 3(3), pages 111-116.
    2. Jae-Hoon Lee & Si-Pom Kim & Rock-Won Jeon, 2016. "Optimal design for adiabatic pipes using vacuum at cryogenic temperatures," Journal of Advances in Technology and Engineering Research, A/Professor Akbar A. Khatibi, vol. 2(1), pages 06-11.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Cheng Mei Tung, 2018. "Vertical integration for smart manufacturing-The dynamic capability perspective," Journal of Advances in Technology and Engineering Research, A/Professor Akbar A. Khatibi, vol. 4(2), pages 70-78.
    2. Regina Lambin & Norwaliza Abdul Wahab & Goh Swee Choo & Ramlee Mustapha & Ramlee Abdullah, 2018. "An exploratory study on Indigenous Knowledge of ‘Green Technology’ (IKGT) among orang asli in Malaysia," Journal of Advances in Humanities and Social Sciences, Dr. Yi-Hsing Hsieh, vol. 4(4), pages 183-196.
    3. Bahadir Birecikli & Aydin Turgut, 2017. "The Design and Mechanical Analysis of Double Zigzag Type of Adhesive Joints," International Journal of Technology and Engineering Studies, PROF.IR.DR.Mohid Jailani Mohd Nor, vol. 3(5), pages 177-183.
    4. Guenther Schuh & Christoph Kelzenberg & Jan Wiese & Felix Stracke, 2018. "Industry 4.0 implementation framework for the producing industry," Journal of Advances in Technology and Engineering Research, A/Professor Akbar A. Khatibi, vol. 4(2), pages 79-90.
    5. M. Syafwansyah Effendi & Noor Rahman & Ahmad Hendrawan, 2017. "The Use of Sollar Collector as Preheater and Condensate Pipe as Heat Recovery in Basin Solar Still to Increase Efficency," International Journal of Technology and Engineering Studies, PROF.IR.DR.Mohid Jailani Mohd Nor, vol. 3(6), pages 264-273.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:apb:jaterr:2018:p:27-36. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: A/Professor Akbar A. Khatibi (email available below). General contact details of provider: https://tafpublications.com/platform/published_papers/10 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.