Author
Listed:
- Keita Nishio
(Aoyama Gakuin University)
- Takashi Kaburagi
(International Christian University)
- Satoshi Kumagai
(Aoyama Gakuin University)
- Toshiyuki Matsumoto
(Aoyama Gakuin University)
- Yosuke Kurihara
(Aoyama Gakuin University)
Abstract
Diagnoses based on the cardiac sound by auscultation that require doctors to obtain cardiac sound in front of a patient is the de facto standard at medical institutions. From the viewpoint of home health management, the burden of the daily monitoring of cardiac sound could be reduced if we could obtain cardiac sounds without applying a stethoscope to the patient?s body. However, prior studies of unconstrained bio-signal measurement methods mainly focused on the detection of low-frequency cardiac movements. We have also proposed an unconstrained cardiac movement measurement method utilizing a pneumatic sensing device. Hence, in this paper we aimed to evaluate whether our pneumatic method also shows sensitivity in the cardiac sound domain. In the proposed method, to measure cardiac sound without restraint, we designed a sheet-shaped device with a high-sensitivity pressure sensor, a rubber tube, an expanded polystyrene spacer, and two polyvinyl chlorides boards. One end of the tube is sealed with glue and the pressure sensor is attached to the other end. The tube with pressure sensor is installed in a groove on the spacer, which is sandwiched between two polyvinyl chlorides boards. When a person lies on the device, cardiac sound changes the pressure in the tube through the upper polyvinyl chloride boards. The pressure sensor then measures the pressure changes. The output signal from the sensor contains noise components as well as the cardiac sound. To extract the cardiac sound, the output signal from the pressure sensor is passed through an analog band-pass filter with a pass frequency of 0.008 Hz to 1 kHz and a non-inverting amplifier with the gain of 2. We evaluated our proposed method in a validity experiment involving a 24-year-old healthy male. The subject was asked to lie on the sensing device, and a stethoscope was applied to his thoracic wall. The correlation coefficient between the frequency spectra calculated by the proposed method and phonocardiogram in the frequency band of 50 Hz to 1 kHz was used as the evaluation index. A correlation coefficient was found of 0.80, showing that the proposed unconstrained measurement method has promising sensitivity in the cardiac sound domain.
Suggested Citation
Keita Nishio & Takashi Kaburagi & Satoshi Kumagai & Toshiyuki Matsumoto & Yosuke Kurihara, 2020.
"Unconstrained Cardiac Sound Measurement Method Utilizing a Pneumatic Sensing Method,"
Proceedings of International Academic Conferences
10012622, International Institute of Social and Economic Sciences.
Handle:
RePEc:sek:iacpro:10012622
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sek:iacpro:10012622. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Klara Cermakova (email available below). General contact details of provider: https://iises.net/ .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.