IDEAS home Printed from https://ideas.repec.org/p/mag/wpaper/08014.html
   My bibliography  Save this paper

Linear Programming for a Cutting Problem in the Wood Processing Industry – A Case Study

Author

Listed:
  • Sören Koch

    (Faculty of Economics and Management, Otto-von-Guericke University Magdeburg)

  • Sebastian König
  • Gerhard Wäscher

    (Faculty of Economics and Management, Otto-von-Guericke University Magdeburg)

Abstract

In this paper the authors present a case study from the wood-processing industry. It focuses on a cutting process in which material from stock is cut down in order to provide the items required by the customers in the desired qualities, sizes, and quantities. In particular, two aspects make this cutting process special. Firstly, the cutting process is strongly interdependent with a preceding handling process, which, consequently, cannot be planned independently. Secondly, if the trim loss is of a certain minimum size, it can be returned into stock and used as input to subsequent cutting processes. In order to reduce the cost of the cutting process, a decision support tool has been developed which incorporates a linear programming model as a central feature. The model is described in detail, and experience from the application of the tool is reported.

Suggested Citation

  • Sören Koch & Sebastian König & Gerhard Wäscher, 2008. "Linear Programming for a Cutting Problem in the Wood Processing Industry – A Case Study," FEMM Working Papers 08014, Otto-von-Guericke University Magdeburg, Faculty of Economics and Management.
    • Handle: RePEc:mag:wpaper:08014
    as

    Download full text from publisher

    File URL: http://www.ww.uni-magdeburg.de/fwwdeka/femm/a2008_Dateien/2008_14.pdf
    File Function: First version, 2008
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Dyckhoff, Harald, 1990. "A typology of cutting and packing problems," European Journal of Operational Research, Elsevier, vol. 44(2), pages 145-159, January.
    2. Gradisar, Miro & Resinovic, Gortan & Kljajic, Miroljub, 1999. "A hybrid approach for optimization of one-dimensional cutting," European Journal of Operational Research, Elsevier, vol. 119(3), pages 719-728, December.
    3. Trkman, Peter & Gradisar, Miro, 2007. "One-dimensional cutting stock optimization in consecutive time periods," European Journal of Operational Research, Elsevier, vol. 179(2), pages 291-301, June.
    4. Kurt Eisemann, 1957. "The Trim Problem," Management Science, INFORMS, vol. 3(3), pages 279-284, April.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Cherri, Adriana Cristina & Arenales, Marcos Nereu & Yanasse, Horacio Hideki & Poldi, Kelly Cristina & Gonçalves Vianna, Andréa Carla, 2014. "The one-dimensional cutting stock problem with usable leftovers – A survey," European Journal of Operational Research, Elsevier, vol. 236(2), pages 395-402.
    2. Erjavec, J. & Gradisar, M. & Trkman, P., 2012. "Assessment of stock size to minimize cutting stock production costs," International Journal of Production Economics, Elsevier, vol. 135(1), pages 170-176.
    3. Melega, Gislaine Mara & de Araujo, Silvio Alexandre & Jans, Raf, 2018. "Classification and literature review of integrated lot-sizing and cutting stock problems," European Journal of Operational Research, Elsevier, vol. 271(1), pages 1-19.
    4. Anselmo Ramalho Pitombeira-Neto & Bruno de Athayde Prata, 2020. "A matheuristic algorithm for the one-dimensional cutting stock and scheduling problem with heterogeneous orders," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 28(1), pages 178-192, April.
    5. Delorme, Maxence & Iori, Manuel & Martello, Silvano, 2016. "Bin packing and cutting stock problems: Mathematical models and exact algorithms," European Journal of Operational Research, Elsevier, vol. 255(1), pages 1-20.
    6. Alexander Abuabara & Reinaldo Morabito, 2009. "Cutting optimization of structural tubes to build agricultural light aircrafts," Annals of Operations Research, Springer, vol. 169(1), pages 149-165, July.
    7. Kallrath, Julia & Rebennack, Steffen & Kallrath, Josef & Kusche, Rüdiger, 2014. "Solving real-world cutting stock-problems in the paper industry: Mathematical approaches, experience and challenges," European Journal of Operational Research, Elsevier, vol. 238(1), pages 374-389.
    8. Ortmann, Frank G. & Ntene, Nthabiseng & van Vuuren, Jan H., 2010. "New and improved level heuristics for the rectangular strip packing and variable-sized bin packing problems," European Journal of Operational Research, Elsevier, vol. 203(2), pages 306-315, June.
    9. Douglas Alem & Pedro Munari & Marcos Arenales & Paulo Ferreira, 2010. "On the cutting stock problem under stochastic demand," Annals of Operations Research, Springer, vol. 179(1), pages 169-186, September.
    10. Trkman, Peter & Gradisar, Miro, 2007. "One-dimensional cutting stock optimization in consecutive time periods," European Journal of Operational Research, Elsevier, vol. 179(2), pages 291-301, June.
    11. Reinertsen, Harald & Vossen, Thomas W.M., 2010. "The one-dimensional cutting stock problem with due dates," European Journal of Operational Research, Elsevier, vol. 201(3), pages 701-711, March.
    12. Maimon, Oded & Dayagi, Arie, 1995. "Nesting planning based on production priorities and technological efficiency," European Journal of Operational Research, Elsevier, vol. 80(1), pages 121-129, January.
    13. Stoyan, Yu. G. & Pankratov, A. V., 1999. "Regular packing of congruent polygons on the rectangular sheet," European Journal of Operational Research, Elsevier, vol. 113(3), pages 653-675, March.
    14. Russo, Mauro & Sforza, Antonio & Sterle, Claudio, 2013. "An improvement of the knapsack function based algorithm of Gilmore and Gomory for the unconstrained two-dimensional guillotine cutting problem," International Journal of Production Economics, Elsevier, vol. 145(2), pages 451-462.
    15. Letchford, Adam N. & Amaral, Andre, 2001. "Analysis of upper bounds for the Pallet Loading Problem," European Journal of Operational Research, Elsevier, vol. 132(3), pages 582-593, August.
    16. Parada Daza, Victor & Gomes de Alvarenga, Arlindo & de Diego, Jose, 1995. "Exact solutions for constrained two-dimensional cutting problems," European Journal of Operational Research, Elsevier, vol. 84(3), pages 633-644, August.
    17. Mhand Hifi & Rym M'Hallah, 2005. "An Exact Algorithm for Constrained Two-Dimensional Two-Staged Cutting Problems," Operations Research, INFORMS, vol. 53(1), pages 140-150, February.
    18. Riehme, Jan & Scheithauer, Guntram & Terno, Johannes, 1996. "The solution of two-stage guillotine cutting stock problems having extremely varying order demands," European Journal of Operational Research, Elsevier, vol. 91(3), pages 543-552, June.
    19. Ramón Alvarez-Valdes & Rafael Martí & Jose M. Tamarit & Antonio Parajón, 2007. "GRASP and Path Relinking for the Two-Dimensional Two-Stage Cutting-Stock Problem," INFORMS Journal on Computing, INFORMS, vol. 19(2), pages 261-272, May.
    20. Klaus Jansen & Roberto Solis-Oba, 2011. "A Polynomial Time OPT + 1 Algorithm for the Cutting Stock Problem with a Constant Number of Object Lengths," Mathematics of Operations Research, INFORMS, vol. 36(4), pages 743-753, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:mag:wpaper:08014. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Guido Henkel (email available below). General contact details of provider: https://edirc.repec.org/data/fwmagde.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.