Positioning of Pedelecs for a Pedelec Sharing System with Free-Floating Bikes

For intelligent mobility concepts in growing urban environments, positioning of transportation vehicles and generally moving objects is a fundamental prerequisite. Global Navigation Satellite Systems (GNSS) are commonly used for this purpose, but especially in urban environments under certain conditions, they offer limited accuracy due to buildings, tunnels, etc. that can deviate or mask the satellite signals. The use of existing built-in sensors of the vehicle and the installation of additional sensors can be utilized to describe the movement of the vehicle independently of GNSS. This conforms to the concept of dead reckoning (DR). Both systems (GNSS and DR) can be integrated and prepared to work together since they compensate their respective weaknesses efficiently. In this study, a method to integrate different inertial sensors (gyroscope and accelerometer) and GNSS is investigated. Pedelecs usually do not have many inbuilt additional sensors like it is the case in cars; therefore, additional low-cost sensors have to be used. An extended Kalman filter (EKF) is the base of calculations to perform data integration. Driving tests are realized to check the performance of the integration model. The results show that positioning in situations where GNSS data is not available can be done through dead reckoning for a short period of time. The weak point hereby is the calibration of the accelerometer. Inaccurate accelerometer data cause increasing inaccuracy of the position due to the double integration of the acceleration over time.