IDEAS home Printed from https://ideas.repec.org/h/spr/spochp/978-3-319-45680-5_11.html
   My bibliography  Save this book chapter

Tensegrity Rings for Deployable Space Antennas: Concept, Design, Analysis, and Prototype Testing

In: Variational Analysis and Aerospace Engineering

Author

Listed:
  • Pier Luigi Ganga

    (Kayser Italia srl)

  • Andrea Micheletti

    (University of Rome “Tor Vergata”)

  • Paolo Podio-Guidugli

    (Accademia Nazionale dei Lincei
    University of Rome “Tor Vergata”)

  • Lucio Scolamiero

    (European Space Agency, ESA ESTEC)

  • Gunnar Tibert

    (Department of Aeronautical and Vehicle Engineering, KTH)

  • Valfredo Zolesi

    (Kayser Italia srl)

Abstract

In this paper, an extended version of Zolesi et al. (Proceedings of the 42nd ICES (AIAA 2012-3601), San Diego, CA, 2012), we describe a tensegrity ring of innovative conception for deployable space antennas. Large deployable space structures are mission-critical technologies for which deployment failure cannot be an option. The difficulty to fully reproduce and test on ground the deployment of large systems dictates the need for extremely reliable architectural concepts. In 2010, ESA promoted a study focused on the pre-development of breakthrough architectural concepts offering superior reliability. This study, which was performed as an initiative of ESA Small Medium Enterprises Office by Kayser Italia at its premises in Livorno (Italy), with Università di Roma TorVergata (Rome, Italy) as sub-contractor and consultancy from KTH (Stockholm, Sweden), led to the identification of an innovative large deployable structure of tensegrity type, which achieves the required reliability because of a drastic reduction in the number of articulated joints in comparison with non-tensegrity architectures. The identified target application was in the field of large space antenna reflectors. The project focused on the overall architecture of a deployable system and the related design implications. With a view toward verifying experimentally the performance of the deployable structure, a reduced-scale breadboard model was designed and manufactured. A gravity off-loading system was designed and implemented, so as to check deployment functionality in a 1-g environment. Finally, a test campaign was conducted, to validate the main design assumptions as well as to ensure the concept’s suitability for the selected target application. The test activities demonstrated satisfactory stiffness, deployment repeatability, and geometric precision in the fully deployed configuration. The test data were also used to validate a finite element model, which predicts a good static and dynamic behavior of the full-scale deployable structure.

Suggested Citation

  • Pier Luigi Ganga & Andrea Micheletti & Paolo Podio-Guidugli & Lucio Scolamiero & Gunnar Tibert & Valfredo Zolesi, 2016. "Tensegrity Rings for Deployable Space Antennas: Concept, Design, Analysis, and Prototype Testing," Springer Optimization and Its Applications, in: Aldo Frediani & Bijan Mohammadi & Olivier Pironneau & Vittorio Cipolla (ed.), Variational Analysis and Aerospace Engineering, pages 269-304, Springer.
    • Handle: RePEc:spr:spochp:978-3-319-45680-5_11
    DOI: 10.1007/978-3-319-45680-5_11
    as

    Download full text from publisher

    To our knowledge, this item is not available for download. To find whether it is available, there are three options:
    1. Check below whether another version of this item is available online.
    2. Check on the provider's web page whether it is in fact available.
    3. Perform a search for a similarly titled item that would be available.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:spochp:978-3-319-45680-5_11. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.