IDEAS home Printed from https://ideas.repec.org/h/spr/prbchp/978-3-319-67101-7_25.html
   My bibliography  Save this book chapter

Choosing the Appropriate Technology for Wastewater Treatment Regarding Energy Sustainability

In: Modeling Innovation Sustainability and Technologies

Author

Listed:
  • David Pereira

    (New University of Lisbon)

  • Inês Moura

    (Adductio)

Abstract

This paper intends to present a study about the costing of construction and operation of a particular branch of wastewater treatment: the use of activated sludge systems. There are three classical options of this process taken into consideration: extended aeration, conventional aeration with standard rate sludge digestion and conventional aeration with high rate sludge digestion and energy valorization. In a large range of served population the treatment alternatives were evaluated, designed according to the current parameters. The economic study of the treatment alternative used a geometrical pre-design, followed by measured work and quotation. This technical-economical modeling allows for the obtainment of interesting conclusions for the future design of wastewater treatment plants, whether they be new facilities or installations that need enlargement and/or rehabilitation. Based on practical assumptions there’s a definition of the served population which brings advantages to the use of one or other alternatives, considering almost exclusively economical and financial criteria. The designer must have the responsibility to consider other factors that are discussed widely. The purpose of the present study, being an academic dissertation, was to offer a general tool for decision. Since it was based on actual average market conditions, it may present deviations when applied to real situations, requiring adaptation from qualified technicians. As it is well-known a wider range of contributing equivalent population should be served, with advantages, by a treatment that incorporates biogas use from mesophilic anaerobic digestion, to produce heat and/ or electricity. On the other hand, smaller equivalent populations use to their advantage extended aeration systems, without separated digestion. The question to answer was for what population there was no doubt about the decision to take without making too many design exercises. In this study the range of populations where one or other system is obviously a good option are divided by a middle range, called “the doubt region”, that has to be studied with more accuracy, due to local and particular characteristics. This “doubt region” includes activated sludge systems with conventional aeration using standard rate anaerobic digestion or treated digestion or extended aeration ones, competing according to actual local conditions. These qualitative results were expected, being the present dissertation a contribution to delimit these results in a quantitative way. It was concluded that the conventional aerated systems with standard rate digestion start to compensate, comparing with the extended aeration systems costs, in 15 years, for served equivalent populations higher than 10,000 inhabitants. The activated sludge conventional aeration system with heated and mixed digesters and energy production from biogas becomes economically viable for the same project duration, from about 35,000 inhabitants served (according to this study, from 33,500 inhabitants), regarding average Portuguese conditions. In between, deep studies must be done, wherein there is the possibility of using separate digestion of primary and secondary sludge in standard rate digesters, a type of solution that is falling into disuse, because of the exploration´s disadvantages, but whose study should be performed to reduce the inconveniences, decrease the energetic consumptions in comparison with extended aeration systems, for a range of equivalent population where the implementation of high rate digestion with energy production is not yet justified.

Suggested Citation

  • David Pereira & Inês Moura, 2018. "Choosing the Appropriate Technology for Wastewater Treatment Regarding Energy Sustainability," Springer Proceedings in Business and Economics, in: Albertina Dias & Bror Salmelin & David Pereira & Miguel Sales Dias (ed.), Modeling Innovation Sustainability and Technologies, pages 319-326, Springer.
  • Handle: RePEc:spr:prbchp:978-3-319-67101-7_25
    DOI: 10.1007/978-3-319-67101-7_25
    as

    Download full text from publisher

    To our knowledge, this item is not available for download. To find whether it is available, there are three options:
    1. Check below whether another version of this item is available online.
    2. Check on the provider's web page whether it is in fact available.
    3. Perform a search for a similarly titled item that would be available.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:prbchp:978-3-319-67101-7_25. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.