IDEAS home Printed from https://ideas.repec.org/h/ito/pchaps/280613.html
   My bibliography  Save this book chapter

Analysis and Optimization of Process Parameters in Wire Electrical Discharge Machining Based on RSM: A Case Study

In: Response Surface Methodology - Research Advances and Applications

Author

Listed:
  • Aysun Sagbas

Abstract

In this book chapter a review and critical analysis on current research trends in wire electrical discharge machining (WEDM) and relation between different process parameters including pulse on time, pulse off time, servo voltage, peak current, dielectric flow rate, wire speed, wire tension on different process responses include material removal rate (MRR), surface roughness (Ra), sparking gap, wire lag and wire wear ration (WWR) and surface integrity factors was investigated. On the basis of critical evaluation of the available literature following conclusions are summarized. In addition, different modeling and optimization methods used in WEDM were discussed and a case study based on response surface method (RSM) including design of experiment (DoE) carried out to find optimal process parameters effect on surface roughness was conducted. In the final part of the present study was presented some recommendations about the trends for future WEDM researches.

Suggested Citation

  • Aysun Sagbas, 2023. "Analysis and Optimization of Process Parameters in Wire Electrical Discharge Machining Based on RSM: A Case Study," Chapters, in: Palanikumar Kayaroganam (ed.), Response Surface Methodology - Research Advances and Applications, IntechOpen.
    • Handle: RePEc:ito:pchaps:280613
    DOI: 10.5772/intechopen.107539
    as

    Download full text from publisher

    File URL: https://www.intechopen.com/chapters/83896
    Download Restriction: no
    File URL: https://libkey.io/10.5772/intechopen.107539?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Keywords

    optimization; modeling; WEDM; RSM; DoE; surface quality;
    All these keywords.

    JEL classification:

    • C60 - Mathematical and Quantitative Methods - - Mathematical Methods; Programming Models; Mathematical and Simulation Modeling - - - General

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:ito:pchaps:280613. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Slobodan Momcilovic (email available below). General contact details of provider: http://www.intechopen.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.