Author
Listed:
- Abdul Hakim
(Universiti Kuala Lumpur, Malaysian Institute of Chemical and Bioengineering Technology, Lot 1988 Bandar Vendor Taboh Naning, 78000 Alor Gajah, Melaka, Malaysia)
- Syahidatul Aisyah
(Universiti Kuala Lumpur, Malaysian Institute of Chemical and Bioengineering Technology, Lot 1988 Bandar Vendor Taboh Naning, 78000 Alor Gajah, Melaka, Malaysia)
- Mohd Edyazuan
(Universiti Kuala Lumpur, Malaysian Institute of Chemical and Bioengineering Technology, Lot 1988 Bandar Vendor Taboh Naning, 78000 Alor Gajah, Melaka, Malaysia)
Abstract
Solar desalination is a process of removing salt content in brackish or saline water and converting it into fresh water by the aid of solar energy. The portable solar basin was utilized to undergo this process and the collected desalinated water was to be compared with the Drinking Water Quality Standard in order to identify the safety and cleanliness of the water produced. The main purpose of this study is to improve the solar basin designs which yield the optimum volume of purified water that achieve the quality of drinking water and low cost. The solar basin was designed with the angle tilt of 15° which it able to achieve maximum sun ray exposure. The solar basin that was used is the conventional type single slope with different component inside the solar basin (without stages and rocks; with stages and without rocks; and with both stages and rocks. The source of water be used in this process is seawater (Pengkalan Balak Beach), ground water (Cherana Puteh Hot Spring) and river (small stream of Sungai Siput). The basin solar design with steps and rocks able to produce maximum desalinated water up to 1120 ml per day with average temperature of 59.7 °C, almost 100% reduction of COD, TDS, conductivity, element traces of Ca, Mg, Na and K with BOD level of 1.55 mg/l which mostly comply with the drinking water standard.
Suggested Citation
Abdul Hakim & Syahidatul Aisyah & Mohd Edyazuan, 2019.
"Development Of Solar Desalination System By Using Basin Solar Energy,"
INWASCON Technology Magazine(i-TECH MAG), Zibeline International Publishing, vol. 1, pages 13-18, September.
Handle:
RePEc:zib:zitecm:v:1:y:2019:p:13-18
DOI: 10.26480/itechmag.01.2019.13.18
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zitecm:v:1:y:2019:p:13-18. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing (email available below). General contact details of provider: https://www.itechmag.org .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.