Author
Listed:
- M. SANTHANAKUMAR
(Department of Industrial Engineering, College of Engineering Guindy, Anna University, Chennai, Tamil Nadu, India)
- R. VIJAYAKUMAR
(��Department of Mechanical Engineering, GRT Institute of Engineering and Technology, Tiruttani, Tamil Nadu, India)
- R. ADALARASAN
(��Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai 602105, Tamilnadu, India)
- M. RAJESH
(�Department of Mechanical Engineering, Hindustan Institute of Technology and Science, Chennai, Tamil Nadu, India)
Abstract
This work investigates the piercing of microholes in turbine shroud rings (Inconel-625) using the Abrasive Waterjet Cutting process. The concern with the hole piercing is the kerf angle caused by the attenuation of the jet energy and stand-off distance, which seriously impacts the processing precision of abrasive water jet piercing. The effects of piercing parameters like machining time (40, 60 and 80s), abrasive mesh size (80 mesh and 120 mesh), stand-off distance (1, 2, 3 and 4mm), abrasive jet pressure (100, 125, 150 and 175MPa) are studied to reduce the kerf angle. The kerf angle increased linearly with a stand-off distance increase at different machining times. By piercing for 60s and 80s, the lowest values of kerf angle are obtained (0.03∘ and 0.02∘). The optimum conditions for making a pierced hole with a minimum kerf angle of 0.02∘ were achieved with a machining time- of 60s, abrasive mesh size- of 20 mesh, and abrasive jet pressure- of Scanning electron microscope (SEM) images and visual measuring system (VMS) images are used to identify the surface characteristics in kerf zone. The features, including ploughing, particle embedment, lip impression and wear path due to the ductile mode of erosion caused by high energy impact, is also discussed.
Suggested Citation
M. Santhanakumar & R. Vijayakumar & R. Adalarasan & M. Rajesh, 2024.
"An In-Depth Investigation On Kerf Angle In Pierced Hole On Inconel-625 Superalloy Using Abrasive Waterjet Cutting Process,"
Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 31(12), pages 1-23, December.
Handle:
RePEc:wsi:srlxxx:v:31:y:2024:i:12:n:s0218625x24500999
DOI: 10.1142/S0218625X24500999
Download full text from publisher
As the access to this document is restricted, you may want to search for a different version of it.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:31:y:2024:i:12:n:s0218625x24500999. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.