IDEAS home Printed from https://ideas.repec.org/a/wsi/srlxxx/v28y2021i10ns0218625x21500955.html
   My bibliography  Save this article

Measurement Of Surface Quality And Optimization Of Cutting Parameters In Slot Milling Of Gfrp Composite Materials With Different Fiber Ratios Produced By Pultrusion Method

Author

Listed:
  • HARUN YAKA

    (Mechanical Engineering Department, Faculty of Technology, Amasya University, Amasya, Turkey)

Abstract

The final shape of fiber-reinforced polymer (FRP) materials is usually given by machining. However, machining FRP materials is complex and difficult. Appropriate cutting tools and cutting parameters should be determined to overcome these difficulties. In this work, glass fiber-reinforced polymer (GFRP) materials with 60% and 68% fiber ratio, produced by pultrusion method, were machined. End of the milling, surface roughness (Ra), delamination damage factor (Fdd), sound and vibration results were analyzed. Experiments were carried out with Taguchi L16 mixed design and the results were analyzed by Taguchi, ANOVA and Pareto charts. In Taguchi and Pareto analyses, the most effective parameter for surface roughness and delamination damage factor was the feed rate, and the cutting velocity for sound and vibration. Different regression models have been tried. Linear regression was found as most suitable. The significance values of the regression models are 92.04% for surface roughness, 87.12% for delamination damage factor, 98.64% for sound and 73.27% for vibration.

Suggested Citation

  • Harun Yaka, 2021. "Measurement Of Surface Quality And Optimization Of Cutting Parameters In Slot Milling Of Gfrp Composite Materials With Different Fiber Ratios Produced By Pultrusion Method," Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 28(10), pages 1-12, October.
    • Handle: RePEc:wsi:srlxxx:v:28:y:2021:i:10:n:s0218625x21500955
    DOI: 10.1142/S0218625X21500955
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0218625X21500955
    Download Restriction: Access to full text is restricted to subscribers
    File URL: https://libkey.io/10.1142/S0218625X21500955?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:28:y:2021:i:10:n:s0218625x21500955. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.