Author
Abstract
Eight segmented PVC columns (Rudberg pillars) inserted vertically in the treads of three vegetation‐covered (‘turf‐banked’) solifluction lobes at altitudes of 912–1031 m in the Fannich Mountains of NW Scotland were exhumed 35 years after insertion, and downslope displacement of each segment was measured to derive velocity profiles for each site. Data from these profiles yielded average surface velocities of 7.8–10.6 mm a‐1 (mean 8.8 mm a‐1), average volumetric velocities of 8.3–13.3 cm3 cm‐1 a‐1 (mean 10.5 cm3 cm‐1 a‐1) and maximum displacement depths of 290–445 mm (mean 390 mm). Measured volumetric velocities for these maritime periglacial sites are fairly similar to those recorded in high alpine environments, but markedly less than most reported rates for solifluction in areas of warm permafrost or deep seasonal freezing. Movement affects only the uppermost parts of individual lobes, and the measured volumetric velocities imply either very slow advance of lobe fronts (~ 0.7 mm a‐1) or slow thickening and steepening of stationary lobe risers. Velocity profiles decline approximately exponentially with depth over the depth range 50–400 mm, consistent with movement by frost creep alone or frost creep plus gelifluction. Comparison with measured rates of periglacial mass transport elsewhere on British mountains suggests (1) that, contrary to traditional views, surface velocities are similar to (and may exceed) those of ploughing boulders in the same area, and (2) that both surface velocities and volumetric velocities are markedly less than at unvegetated sites where needle ice creep is the dominant component of solifluction. Copyright © 2012 John Wiley & Sons, Ltd.
Suggested Citation
Colin K. Ballantyne, 2013.
"A 35‐Year Record of Solifluction in a Maritime Periglacial Environment,"
Permafrost and Periglacial Processes, John Wiley & Sons, vol. 24(1), pages 56-66, January.
Handle:
RePEc:wly:perpro:v:24:y:2013:i:1:p:56-66
DOI: 10.1002/ppp.1761
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:perpro:v:24:y:2013:i:1:p:56-66. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)1099-1530 .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.