Author
Listed:
- Á. Ní Bhreasail
- P. D. Lee
- C. O'Sullivan
- C. H. Fenton
- R. Hamilton
- P. Rockett
- T. Connolley
Abstract
Phase‐contrast synchrotron micro‐computed tomography (μCT) is well suited to studying the microstructure of frozen soil. To take advantage of the high‐resolution three‐dimensional images that can be generated using μCT, a specialised in‐situ rig was designed and commissioned. This miniature temperature‐controlled oedometer is capable of controlling soil sample thermal gradients and applying uniaxial deformation while measuring stress. This system was used to apply repeated freeze‐thaw cycles to water‐saturated samples of Leighton Buzzard sand, Reigate sand and spherical glass ballotini (an idealised soil). High‐resolution images were obtained using a monochromatic, parallel beam of x‐rays generated on Beamline I12 of the Diamond synchrotron. Cracking in the ice was directly measured utilising the phase‐contrast fringes generated by ice‐air interfaces. Examination of these images revealed two modes of crack formation in the ice phase of frozen soil: micro‐cracks between soil particles, and longer, well‐developed cracks that follow along ice‐soil particle boundaries and span across the ice between particles. Both crack types were orientated parallel to the freezing front (normal to the heat flow), affecting both the frozen soils' mechanical behaviour, and we hypothesise that these cracks are potential initiation sites for ice lens development. Copyright © 2012 John Wiley & Sons, Ltd.
Suggested Citation
Á. Ní Bhreasail & P. D. Lee & C. O'Sullivan & C. H. Fenton & R. Hamilton & P. Rockett & T. Connolley, 2012.
"In‐Situ Observation of Cracks in Frozen Soil using Synchrotron Tomography,"
Permafrost and Periglacial Processes, John Wiley & Sons, vol. 23(2), pages 170-176, April.
Handle:
RePEc:wly:perpro:v:23:y:2012:i:2:p:170-176
DOI: 10.1002/ppp.1737
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:perpro:v:23:y:2012:i:2:p:170-176. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)1099-1530 .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.