On the effect of S-parameter stability of antenna and coupler on electrical balance duplexing

Electrical Balance Duplexers (EBDs) provide transmit-receive isolation to implement a form of self-interference cancellation to facilitate simultaneous transmission and reception from a single antenna in systems like In-Band Full-duplex (IBFD) transceivers. EBD works by coupling transmitter, receiver, antenna, and balancing impedance using a hybrid coupler. In recent pieces of literature, antenna impedance variations are considered the main factor limiting the EBD isolation bandwidth, while the EBD balancing impedance needs to be equal as much as possible to the antenna impedance to achieve high isolation. But hybrid couplers are also not ideal elements, and their S-parameters are not stable in the frequency domain. In this work, five broadband RF devices (two antennas, two couplers, and a 50-Ohm RF-load) are used to form four EBD set-ups. One of the antennas, designed by the authors, has more impedance stability in the frequency domain than the other one, which is a commercial antenna. Also, one of the couplers, designed by the authors, has more S-parameter stability in Ultra-Wideband (UWB) frequency domain than the other one, which is a commercial UWB coupler. The implemented EBDs show that when both antenna and coupler have strong S-parameter stabilities in the frequency domain, wider isolation bandwidth (UWB 1.5–3.5 GHz range) and higher EBD isolation are obtained.