IDEAS home Printed from https://ideas.repec.org/a/taf/gcmbxx/v18y2015i2p124-129.html
   My bibliography  Save this article

Microstructural residual stress in particle-filled dental composite

Author

Listed:
  • Ondřej Prejzek
  • Miroslav Španiel
  • Tomáš Mareš

Abstract

The main goal of this study is to develop a micromechanical model of a particle-filled dental composite focused on the residual stress (RS) field developed during the curing process in its microstructure. A finite element model of a representative volume element of filler and resin was developed, and volumetric shrinkage was simulated during the curing process. Four material models (von Mises plasticity model, Drucker–Prager plasticity model, von Mises plasticity model with stress relaxation and Drucker–Prager plasticity with stress relaxation) of the polymer resin were built to assess the influence of the material model on the resulting internal stress. The relationship between the curing process and the magnitude of the stress components will be described, and an analysis of the post-curing state of the material in particular microstructure locations will be conducted in this study. Obtained RS is comparable to the stresses developed in the material under the external load. The substantial dependence on the choice of material model for resin is to be observed, and the suitability of particular models is discussed.

Suggested Citation

  • Ondřej Prejzek & Miroslav Španiel & Tomáš Mareš, 2015. "Microstructural residual stress in particle-filled dental composite," Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis Journals, vol. 18(2), pages 124-129, January.
    • Handle: RePEc:taf:gcmbxx:v:18:y:2015:i:2:p:124-129
    DOI: 10.1080/10255842.2013.781158
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1080/10255842.2013.781158
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1080/10255842.2013.781158?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:taf:gcmbxx:v:18:y:2015:i:2:p:124-129. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Longhurst (email available below). General contact details of provider: http://www.tandfonline.com/gcmb .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.