IDEAS home Printed from https://ideas.repec.org/a/sae/engenv/v34y2023i8p3292-3309.html
   My bibliography  Save this article

Conversion of biomass into biofuel by microwave pyrolysis: Assessment of energy and exergy aspect

Author

Listed:
  • Ahmed Elsayed Mahmoud Fodah
  • Taha Abdelfattah Mohammed Abdelwahab

Abstract

Higher heating value, energy and exergy analysis of bio-oil and biochar from microwave pyrolysis have been assessed. The energy efficiency for the pyrolysis system has been analyzed by the comparisons of energy based on heating values. The exergy analysis was done using standard relationships by the fraction of energy actually available for practical uses as biofuel. The yield of bio-oil and its higher heating value (HHV) were increased by 2–13% and 25–130% respectively when the microwave power increased from 500 W to 700 W, then both are decreased at 900 W. Using activated carbon (AC) had a remarkable effect on increasing the yield and HHV of bio-oil by 18–31% and 3–7 times respectively more than other cases. By using the additives, the yield of biochar decreased remarkably, while its HHV increased by 12%-40% compared to without additive. The maximum energy and exergy rate (1.74 MJ/h) of the bio-oil were obtained at 700 W level of microwave power using AC additive, while for biochar were 1.95 MJ/h and 2 MJ/h when no additive used. The maximum values of energy and exergy of the bio-oil were computed to be 27% and 26% respectively at 700 W using AC as an additive. The maximum values of energy and exergy efficiency of biochar were calculated to be 33% and 32% respectively when pyrolyzed at 500 W using AC. The energy and exergy efficiencies of the pyrolysis system were computed to be maximum value of 53.3% and 52.8% respectively at 700 W using AC additive.

Suggested Citation

  • Ahmed Elsayed Mahmoud Fodah & Taha Abdelfattah Mohammed Abdelwahab, 2023. "Conversion of biomass into biofuel by microwave pyrolysis: Assessment of energy and exergy aspect," Energy & Environment, , vol. 34(8), pages 3292-3309, December.
    • Handle: RePEc:sae:engenv:v:34:y:2023:i:8:p:3292-3309
    DOI: 10.1177/0958305X221122929
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/0958305X221122929
    Download Restriction: no
    File URL: https://libkey.io/10.1177/0958305X221122929?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:engenv:v:34:y:2023:i:8:p:3292-3309. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.