IDEAS home Printed from https://ideas.repec.org/a/plo/pone00/0237039.html
   My bibliography  Save this article

Research on the deformation law for flat rolling of a core filled tube based on the slab method

Author

Listed:
  • Junlong Qi
  • Xianghua Liu
  • Haitao Gao
  • Xiangkun Sun

Abstract

The deformation law for axisymmetric deformation during the drawing of a core filled tube (CORFT) has been studied. However, the results of such studies could not be used in the flat rolling process of the CORFT, which is a plan deformation condition. In this paper, the inner core material and outer steel tube were successively analyzed based on the slab method during the flat rolling process (plan deformation) of the CORFT, and equations for wall thickness, core density, and roll force have been developed. The theoretical results solved by the developed equations were compared with the experimental results, revealing adequate accuracy for engineering requirements. The influences of rolling parameters on the roll force and the ultimate value of the relative density of the core material were studied, and the limiting condition for a larger roll force or higher value for relative density was obtained.

Suggested Citation

  • Junlong Qi & Xianghua Liu & Haitao Gao & Xiangkun Sun, 2020. "Research on the deformation law for flat rolling of a core filled tube based on the slab method," PLOS ONE, Public Library of Science, vol. 15(8), pages 1-21, August.
    • Handle: RePEc:plo:pone00:0237039
    DOI: 10.1371/journal.pone.0237039
    as

    Download full text from publisher

    File URL: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0237039
    Download Restriction: no
    File URL: https://journals.plos.org/plosone/article/file?id=10.1371/journal.pone.0237039&type=printable
    Download Restriction: no
    File URL: https://libkey.io/10.1371/journal.pone.0237039?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. He, Kun & Wang, Li, 2017. "A review of energy use and energy-efficient technologies for the iron and steel industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 1022-1039.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hu, Xueyue & Wang, Chunying & Elshkaki, Ayman, 2024. "Material-energy Nexus: A systematic literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    2. Yuancheng Lin & Honghua Yang & Linwei Ma & Zheng Li & Weidou Ni, 2021. "Low-Carbon Development for the Iron and Steel Industry in China and the World: Status Quo, Future Vision, and Key Actions," Sustainability, MDPI, vol. 13(22), pages 1-28, November.
    3. Fábio de Oliveira Neves & Henrique Ewbank & José Arnaldo Frutuoso Roveda & Andrea Trianni & Fernando Pinhabel Marafão & Sandra Regina Monteiro Masalskiene Roveda, 2022. "Economic and Production-Related Implications for Industrial Energy Efficiency: A Logistic Regression Analysis on Cross-Cutting Technologies," Energies, MDPI, vol. 15(4), pages 1-19, February.
    4. Shijie Ding & Jing Zhao & Meng Zhang & Sheng Yang & Hongwei Zhang, 2022. "Measuring the environmental protection efficiency and productivity of the 49 largest iron and steel enterprises in China," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(1), pages 454-472, January.
    5. Rao Fu & Kun Peng & Peng Wang & Honglin Zhong & Bin Chen & Pengfei Zhang & Yiyi Zhang & Dongyang Chen & Xi Liu & Kuishuang Feng & Jiashuo Li, 2023. "Tracing metal footprints via global renewable power value chains," Nature Communications, Nature, vol. 14(1), pages 1-14, December.
    6. Haendel, Michael & Hirzel, Simon & Süß, Marlene, 2022. "Economic optima for buffers in direct reduction steelmaking under increasing shares of renewable hydrogen," Renewable Energy, Elsevier, vol. 190(C), pages 1100-1111.
    7. Bhadbhade, Navdeep & Zuberi, M. Jibran S. & Patel, Martin K., 2019. "A bottom-up analysis of energy efficiency improvement and CO2 emission reduction potentials for the swiss metals sector," Energy, Elsevier, vol. 181(C), pages 173-186.
    8. Skoczkowski, Tadeusz & Verdolini, Elena & Bielecki, Sławomir & Kochański, Max & Korczak, Katarzyna & Węglarz, Arkadiusz, 2020. "Technology innovation system analysis of decarbonisation options in the EU steel industry," Energy, Elsevier, vol. 212(C).
    9. Askar A. Akaev & Olga I. Davydova, 2021. "Mathematical Description of Energy Transition Scenarios Based on the Latest Technologies and Trends," Energies, MDPI, vol. 14(24), pages 1-25, December.
    10. Sergio García García & Vicente Rodríguez Montequín & Henar Morán Palacios & Adriano Mones Bayo, 2020. "A Mixed Integer Linear Programming Model for the Optimization of Steel Waste Gases in Cogeneration: A Combined Coke Oven and Converter Gas Case Study," Energies, MDPI, vol. 13(15), pages 1-25, July.
    11. Marcin Sajdak & Roksana Muzyka & Grzegorz Gałko & Ewelina Ksepko & Monika Zajemska & Szymon Sobek & Dariusz Tercki, 2022. "Actual Trends in the Usability of Biochar as a High-Value Product of Biomass Obtained through Pyrolysis," Energies, MDPI, vol. 16(1), pages 1-30, December.
    12. Hu, Zhengbiao & He, Dongfeng & Zhao, Hongbo, 2023. "Multi-objective optimization of energy distribution in steel enterprises considering both exergy efficiency and energy cost," Energy, Elsevier, vol. 263(PB).
    13. Llera, Rocio & Vigil, Miguel & Díaz-Díaz, Sara & Martínez Huerta, Gemma Marta, 2022. "Prospective environmental and techno-economic assessment of steam production by means of heat pipes in the steel industry," Energy, Elsevier, vol. 239(PD).
    14. Mikhail A. Averbukh & Nikolay A. Zhukov & Stanislav V. Khvorostenko & Vasiliy I. Panteleev, 2019. "Reducing Electric Power Losses in the System of Power Supply Due to Compensation of Higher Harmonics of Currents: Economic and Energy Efficiency Outcomes," International Journal of Energy Economics and Policy, Econjournals, vol. 9(4), pages 396-403.
    15. Liu, Changxin & Xie, Zhihui & Sun, Fengrui & Chen, Lingen, 2017. "Exergy analysis and optimization of coking process," Energy, Elsevier, vol. 139(C), pages 694-705.
    16. Zhang, Hanxin & Sun, Wenqiang & Li, Weidong & Ma, Guangyu, 2022. "A carbon flow tracing and carbon accounting method for exploring CO2 emissions of the iron and steel industry: An integrated material–energy–carbon hub," Applied Energy, Elsevier, vol. 309(C).
    17. Wang, Yihan & Wen, Zongguo & Yao, Jianguo & Doh Dinga, Christian, 2020. "Multi-objective optimization of synergic energy conservation and CO2 emission reduction in China's iron and steel industry under uncertainty," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    18. Lee, Boreum & Kim, Hyunwoo & Lee, Hyunjun & Byun, Manhee & Won, Wangyun & Lim, Hankwon, 2020. "Technical and economic feasibility under uncertainty for methane dry reforming of coke oven gas as simultaneous H2 production and CO2 utilization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    19. Victor A. Alcal Abraham & Elkin D. Alem n Causil & Vladimir Sousa Santos & Eliana Noriega Angarita & Julio R. G mez Sarduy, 2021. "Identification of Savings Opportunities in a Steel Manufacturing Industry," International Journal of Energy Economics and Policy, Econjournals, vol. 11(4), pages 43-50.
    20. António da Silva Gonçalves, Vítor & Mil-Homens dos Santos, Feliz José, 2019. "Energy management system ISO 50001:2011 and energy management for sustainable development," Energy Policy, Elsevier, vol. 133(C).

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:plo:pone00:0237039. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: plosone (email available below). General contact details of provider: https://journals.plos.org/plosone/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.