IDEAS home Printed from https://ideas.repec.org/a/hin/jnlmpe/4812470.html
   My bibliography  Save this article

PTFE in Wet and Dry Drilling: Two-Tier Modeling and Optimization through ANFIS

Author

Listed:
  • Sangeetha Elango
  • Kaviarasan Varadaraju
  • Elango Natarajan
  • Ezra Morris Abraham Gnanamuthu
  • R. Durairaj
  • P. Mariappan
  • Nagarajan Deivanayagampillai

Abstract

This research is done to determine the optimum parameters to drill polytetrafluoroethylene (PTFE) and to investigate the effect of two-tier modeling for enhanced response in optimization. RSM model was done with L27 experimental design, considering speed (N), feed (f), and tool point angle (Ɵ). RSM data were further trained and tested using the Adaptive Neuro-Fuzzy Inference System (ANFIS), and β coefficient values were restructured to form revised RSM model. Both nonrevised RSM model and revised RSM model were used in Genetic Algorithm to locate the minimum surface roughness. ANFIS revised RSM model deviates from the experimental results by 2.6% and 2.86% for dry and wet condition; meanwhile, nonrevised RSM model deviates by 4.76% and 4.94%, respectively. The research concludes that two-tier modeling using RSM and ANFIS is better. Spindle speed of 1656 rpm, feed rate of 0.05 mm/min, and point angle of 100° are the optimum conditions to drill PTFE material where the best surface quality of 0.68 μm at wet drilling can be achieved.

Suggested Citation

  • Sangeetha Elango & Kaviarasan Varadaraju & Elango Natarajan & Ezra Morris Abraham Gnanamuthu & R. Durairaj & P. Mariappan & Nagarajan Deivanayagampillai, 2022. "PTFE in Wet and Dry Drilling: Two-Tier Modeling and Optimization through ANFIS," Mathematical Problems in Engineering, Hindawi, vol. 2022, pages 1-10, April.
    • Handle: RePEc:hin:jnlmpe:4812470
    DOI: 10.1155/2022/4812470
    as

    Download full text from publisher

    File URL: http://downloads.hindawi.com/journals/mpe/2022/4812470.pdf
    Download Restriction: no
    File URL: http://downloads.hindawi.com/journals/mpe/2022/4812470.xml
    Download Restriction: no
    File URL: https://libkey.io/10.1155/2022/4812470?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:hin:jnlmpe:4812470. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Mohamed Abdelhakeem (email available below). General contact details of provider: https://www.hindawi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.