IDEAS home Printed from https://ideas.repec.org/a/hin/jnlmpe/2393799.html
   My bibliography  Save this article

Experimental Research on the Measurement of High-Pressure Microflow Based on Momentum Principle

Author

Listed:
  • Hua Xia
  • Fuqiang Luo
  • Zhong Wang
  • Jianguo Wang

Abstract

The fuel injector is an important component of the diesel engine. It has a great influence on the atomization of diesel fuel injection, the formation of mixed gas, and combustion emissions. Due to the current nozzle structure, processing level, and the internal hydraulic conditions of each nozzle, there are certain differences between the injection rules of each hole, and there are few methods to quantify the quality of the injector using mathematical methods in engineering. Based on the principle of spray momentum, this paper measures the injection characteristics of each hole of four five-hole pressureless chamber injectors of the same model and analyzes the circulating fuel injection volume and flow coefficient of each injector and each hole under different working conditions. It is proposed to evaluate the quality of the injector with the average circulating fuel injection volume, average flow coefficient, and nonuniformity as indicators. The test results are as follows: there are differences in the circulating fuel injection volume and flow coefficient between each hole of the same fuel injector. With the increase of the fuel injection pump speed, the average circulating fuel injection volume of each hole differs by 2.8%–47.5%, and the average flow coefficient differs by 3.7%–30%; as the fuel injection volume increases, the average circulating fuel injection volume of each injector differs 1.8%–36%, and the average flow coefficient difference is 2.5%–28.7%. The circulating fuel injection volume and flow coefficient of different fuel injectors of the same model are different. With the increase of the fuel injection pump speed, the average circulating fuel injection volume of each injector differs by 3.5%–9.6%, and the average flow coefficient differs by 1.4%–5.7%; as the fuel injection volume increases, the average circulating fuel injection volume of each injector differs 0.3%–5.5%, and the average flow coefficient difference is 2.8–4.2%. The relative flow coefficient of each hole differs from 0 to 0.02, and the nonuniformity differs from 1.8% to 16.9%. The relative circulating fuel injection amount of each hole differs from 0.02 to 0.1, and the nonuniformity differs from 1.1% to 6.9%. The relative flow coefficient of each hole and its nonuniformity is smaller than the relative circulating fuel injection volume of each hole and its nonuniformity.

Suggested Citation

  • Hua Xia & Fuqiang Luo & Zhong Wang & Jianguo Wang, 2021. "Experimental Research on the Measurement of High-Pressure Microflow Based on Momentum Principle," Mathematical Problems in Engineering, Hindawi, vol. 2021, pages 1-13, November.
  • Handle: RePEc:hin:jnlmpe:2393799
    DOI: 10.1155/2021/2393799
    as

    Download full text from publisher

    File URL: http://downloads.hindawi.com/journals/mpe/2393799.pdf
    Download Restriction: no

    File URL: http://downloads.hindawi.com/journals/mpe/2393799.xml
    Download Restriction: no

    File URL: https://libkey.io/10.1155/2021/2393799?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:hin:jnlmpe:2393799. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Mohamed Abdelhakeem (email available below). General contact details of provider: https://www.hindawi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.