Experimental Study on the Anti-Scouring Characteristics of Bedrock in Engineering Reservoir Areas That Are Conducive to Sustainable Development

High-speed water flow conditions can cause erosion of the bedrock in engineering areas. Due to the lack of accurate evaluation of bedrock scour and erosion rates, there has been a consumption of manpower and resources without achieving satisfactory engineering outcomes. Therefore, studying the scouring and erosion effects of water flow on bedrock is of significant importance for maintaining the sustainable development and safety of engineering projects. Using the bedrock prototype from the Xiaonanhai site in the upper reaches of the Yangtze River, a model test device was developed to conduct anti-scour tests on the bedrock. The study quantitatively examined the basic physical properties, incipient erosion velocity, and erosion rates of different types of bedrock. The study found that the prototype bedrock under natural exposure, submerged immersion, and alternating wet and dry conditions showed a trend of decreased tensile strength, with the alternating wet and dry conditions being the most detrimental to maintaining the physical properties of the rock mass. The anti-scour velocity of silty claystone and clayey siltstone samples increased with the increase in tensile strength, and the erosion rate increased with the increase in shear stress. If the shear stress is kept constant, the erosion rate decreases with the increase in tensile strength. The erosion rate is inversely proportional to the ratio of the bedrock’s tensile strength to the riverbed shear stress, with the fitting relationship showing a piecewise linear distribution. The research results can provide guidance for the safe production of engineering involving bedrock erosion in engineering reservoir areas that are conducive to sustainable development.