Author
Listed:
- Ludovica Varriale
(Department of Mechanical and Process Engineering, Division of Bioprocess Engineering, Rhein-Palatinate Technical University Kaiserslautern-Landau, 67663 Kaiserslautern, Germany)
- Jan-Niklas Hengsbach
(Department of Mechanical and Process Engineering, Division of Bioprocess Engineering, Rhein-Palatinate Technical University Kaiserslautern-Landau, 67663 Kaiserslautern, Germany)
- Tianyi Guo
(Department of Bioprocess Engineering and Downstream Processing, University of Applied Sciences Aachen, 52428 Jülich, Germany)
- Katrin Kuka
(Julius Kühn-Institute (JKI), Federal Research Centre for Cultivated Plants, 38116 Braunschweig, Germany)
- Nils Tippkötter
(Department of Bioprocess Engineering and Downstream Processing, University of Applied Sciences Aachen, 52428 Jülich, Germany)
- Roland Ulber
(Department of Mechanical and Process Engineering, Division of Bioprocess Engineering, Rhein-Palatinate Technical University Kaiserslautern-Landau, 67663 Kaiserslautern, Germany)
Abstract
Perennial ryegrass ( Lolium perenne ) is an underutilized lignocellulosic biomass that has several benefits such as high availability, renewability, and biomass yield. The grass press-juice obtained from the mechanical pretreatment can be used for the bio-based production of chemicals. Lactic acid is a platform chemical that has attracted consideration due to its broad area of applications. For this reason, the more sustainable production of lactic acid is expected to increase. In this work, lactic acid was produced using complex medium at the bench- and reactor scale, and the results were compared to those obtained using an optimized press-juice medium. Bench-scale fermentations were carried out in a pH-control system and lactic acid production reached approximately 21.84 ± 0.95 g/L in complex medium, and 26.61 ± 1.2 g/L in press-juice medium. In the bioreactor, the production yield was 0.91 ± 0.07 g/g, corresponding to a 1.4-fold increase with respect to the complex medium with fructose. As a comparison to the traditional ensiling process, the ensiling of whole grass fractions of different varieties harvested in summer and autumn was performed. Ensiling showed variations in lactic acid yields, with a yield up to 15.2% dry mass for the late-harvested samples, surpassing typical silage yields of 6–10% dry mass.
Suggested Citation
Ludovica Varriale & Jan-Niklas Hengsbach & Tianyi Guo & Katrin Kuka & Nils Tippkötter & Roland Ulber, 2024.
"Sustainable Production of Lactic Acid Using a Perennial Ryegrass as Feedstock—A Comparative Study of Fermentation at the Bench- and Reactor-Scale, and Ensiling,"
Sustainability, MDPI, vol. 16(18), pages 1-19, September.
Handle:
RePEc:gam:jsusta:v:16:y:2024:i:18:p:8054-:d:1478419
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:18:p:8054-:d:1478419. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.