Poly-Methyl-Methacrylate Rods in Light-Transmitting Concrete: A Critical Investigation into Sustainable Implementation

The development of special concrete focussed on sustainability and energy conservation has been approached through the use of recycled materials, novel techniques and processes, and materials that harness natural energy. This paper presents the results of one such study on the development of light-transmitting concrete using a novel polymeric transmitting media, poly-methyl-methacrylate, and a detailed analysis of the results obtained. Four variants based on the diameter and number of rods have been studied, with 5 and 10 mm diameter rods incorporated into 100 mm cube samples. A positive correlation between the area of rods and transmittance has been established; however, a loss in compressive and flexural strength was observed. Seasonal and monthly variation results indicate higher transmittance in summer, with the highest transmittance being observed in the month of May and the monsoon having the lowest transmittance, specifically in the month of July. The results of a case study of the application of the material have also been presented. The cost of construction has been studied, and the prediction of electricity consumption during operations has been carried out. The results have indicated the feasibility of use, even with the high initial cost. Variants have been shown to return the investments in a period of 7–31 years. Additionally, three of the four variants showed a sharp decrease in total CO 2 emissions by eliminating the need for energy for daylighting and eliminating the consumption of electricity throughout the service life. Variants have been shown to return the investments in a period of 7–31 years. Additionally, three of the four variants show a sharp decrease in total CO 2 emissions by eliminating the need for energy for daylighting and eliminating the consumption of electricity throughout the service life.