IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i3p1873-d1040263.html
   My bibliography  Save this article

Environmental Sustainability of Industrial Waste-Based Cementitious Materials: A Review, Experimental Investigation and Life-Cycle Assessment

Author

Listed:
  • Satheeskumar Navaratnam

    (School of Engineering, RMIT University, Melbourne, VIC 3001, Australia)

  • Quddus Tushar

    (School of Engineering, RMIT University, Melbourne, VIC 3001, Australia)

  • Israt Jahan

    (School of Engineering, RMIT University, Melbourne, VIC 3001, Australia)

  • Guomin Zhang

    (School of Engineering, RMIT University, Melbourne, VIC 3001, Australia)

Abstract

Wall plaster production induces significant environmental impacts during its entire life as it consumes a high amount of cement and natural resources. Therefore, in sustainable development, industrial wastes are partially replaced to produce cementitious material to reduce environmental impacts. This study aims to identify the optimal environmental benefits from the waste-based cementitious materials that are used to produce wall plaster. Thus, this study involved conducting a comprehensive review of the mechanical and sustainable performance of industrial waste-based cementitious materials focused on wall construction. Then, an experimental test was conducted to ensure the appropriate mix design to enable the required compressive strength. A comparative analysis of mortar showed that it contained 15% (by weight) of fly ash, blast furnace slag, bottom ash, recycled glass, ferronickel slag, expanded polystyrene and wood ash using life-cycle assessment. The results show that mortar containing fly ash has lower environmental impacts in almost all impact categories (i.e., human health, the ecosystem and natural resources). Endpoint damage assessment of mortar mixtures expresses resource extraction cost as the most affected impact criteria. The replacement of globally consumed cement with 15% fly ash can contribute to monetary savings of up to USD 87.74 billion. The assessment clarifies the advantage of incorporating waste products in cement mortar, which allows policymakers to interpret the analysis for decision making. This study also found that the production of industrial wastes for mortar mixes has a significant impact on the environment.

Suggested Citation

  • Satheeskumar Navaratnam & Quddus Tushar & Israt Jahan & Guomin Zhang, 2023. "Environmental Sustainability of Industrial Waste-Based Cementitious Materials: A Review, Experimental Investigation and Life-Cycle Assessment," Sustainability, MDPI, vol. 15(3), pages 1-20, January.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:3:p:1873-:d:1040263
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/3/1873/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/3/1873/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Svetlana Pushkar, 2019. "The Effect of Different Concrete Designs on the Life-Cycle Assessment of the Environmental Impacts of Concretes Containing Furnace Bottom-Ash Instead of Sand," Sustainability, MDPI, vol. 11(15), pages 1-20, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alvin Rahardjo & Satheeskumar Navaratnam & Guomin Zhang & Quddus Tushar & Kate Nguyen, 2024. "Suitability of Foamed Concrete for the Composite Floor System in Mid-to-High-Rise Modular Buildings: Design, Structural, and Sustainability Perspectives," Sustainability, MDPI, vol. 16(4), pages 1-28, February.
    2. Lisley Madeira Coelho & Antônio Carlos Rodrigues Guimarães & Claudio Rafael Cicuto Landim Alves Moreira & Graziella Pereira Pires dos Santos & Sergio Neves Monteiro & Pedro Henrique Poubel Mendonça da, 2024. "Feasibility of Using Ferronickel Slag as a Sustainable Alternative Aggregate in Hot Mix Asphalt," Sustainability, MDPI, vol. 16(19), pages 1-17, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jan Fořt & Jiří Šál & Jaroslav Žák & Robert Černý, 2020. "Assessment of Wood-Based Fly Ash as Alternative Cement Replacement," Sustainability, MDPI, vol. 12(22), pages 1-16, November.
    2. Svetlana Pushkar & Yuri Ribakov, 2020. "Life-Cycle Assessment of Strengthening Pre-Stressed Normal-Strength Concrete Beams with Different Steel-Fibered Concrete Layers," Sustainability, MDPI, vol. 12(19), pages 1-15, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:3:p:1873-:d:1040263. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.