IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i19p14425-d1252398.html
   My bibliography  Save this article

Exploring Fresh and Hardened Properties of Sustainable 3D-Printed Lightweight Cementitious Mixtures

Author

Listed:
  • Reza Sedghi

    (Department of Civil, Construction, Environmental Engineering, University of New Mexico, Albuquerque, NM 87131, USA)

  • Muhammad Saeed Zafar

    (Department of Civil, Construction, Environmental Engineering, University of New Mexico, Albuquerque, NM 87131, USA)

  • Maryam Hojati

    (Department of Civil, Construction, Environmental Engineering, University of New Mexico, Albuquerque, NM 87131, USA)

Abstract

This study investigates using lightweight concrete in 3D printing to reduce transportation costs and maintain structural strength. Normal-weight river (RS) sand was replaced with pumice and expanded glass at 50% and 100% volumes to decrease the material density. This substitution reduced the weight of various mixes up to 25.1%, with apparent porosity ranging from 11.37% to 27.9%. This study found that aggregate characteristics, including the shape, size, and absorption capacity, influenced printability. Rounded aggregates like expanded glass flowed better and required less water than irregular pumice. Lightweight aggregates had finer textures and higher porosity, needing more water. According to the extrudability results, the best print quality was achieved using 100% expanded glass, incorporating methylcellulose (MC) and polyethylene (PE) fibers. Moreover, the buildability outcomes highlighted a reliance on the printing speed and the water-to-binder (W/B) ratio. Comparing cast and 3D printed specimens, cast concrete reached a maximum compressive strength of 65.6 MPa, while 3D printed concrete achieved a maximum strength of 43.4 MPa. RS had the highest strength (65.6 MPa), while expanded glass showed the lowest (17.5 MPa) in both cast and 3D printed specimens. Adding PE and MC enhanced the print quality and increased the compressive strength due to the fibers’ bridging capacity.

Suggested Citation

  • Reza Sedghi & Muhammad Saeed Zafar & Maryam Hojati, 2023. "Exploring Fresh and Hardened Properties of Sustainable 3D-Printed Lightweight Cementitious Mixtures," Sustainability, MDPI, vol. 15(19), pages 1-37, October.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:19:p:14425-:d:1252398
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/19/14425/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/19/14425/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Shanmugaraj Senthilnathan & Benny Raphael, 2022. "Using Computer Vision for Monitoring the Quality of 3D-Printed Concrete Structures," Sustainability, MDPI, vol. 14(23), pages 1-21, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.

      Corrections

      All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:19:p:14425-:d:1252398. See general information about how to correct material in RePEc.

      If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

      If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

      If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

      For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

      Please note that corrections may take a couple of weeks to filter through the various RePEc services.

      IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.