IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v12y2020i20p8393-d426757.html
   My bibliography  Save this article

Mechanical Properties and Damage in Lignite under Combined Cyclic Compression and Shear Loading

Author

Listed:
  • Haoshuai Wu

    (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)

  • Haibo Bai

    (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)

  • Yanlong Chen

    (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)

  • Hai Pu

    (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China
    College of Mining Engineering and Geology, Xinjiang Institute of Engineering, Urumqi 830091, China)

  • Kai Zhang

    (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China)

Abstract

In this paper, uniaxial cyclic compression and shear test was carried out for lignite samples. The effects of inclination angle ( θ ) and upper limit of cyclic stress ( σ max ) on mechanical properties of coal samples were analyzed, and the damage variables of coal samples were studied based on energy dissipation theory. The results show that the uniaxial compressive strength (UCS) of coal samples after uniaxial cyclic compression and shear tests decreases with the increase of the upper limit of cyclic stress and inclination angle. The shear stress component generated by the increase of inclination angle can effectively reduce the UCS and increase the damage degree of coal samples. With the increase of inclination angle, the failure mode of coal samples is changed from tensile failure ( θ = 0°), the combined tensile failure and shear failure ( θ = 5°) to shear failure ( θ = 10°). The peak axial and radial strain of coal samples first increases rapidly and then stagnates. The peak volume strain rapid increases and then stagnates ( θ = 0° and θ = 5°). When the inclination angle is 10°, the peak volume strain first decreases rapidly and then stagnates. Even if the upper limit of cyclic stress is lower than its UCS, it will still promote the propagation of micro cracks and the generation of new cracks and increase the internal damage of coal samples. With the increase of the cycle number, damage variables of coal samples after uniaxial cyclic compression and shear tests nonlinearly increase, and the growth rate decreases gradually.

Suggested Citation

  • Haoshuai Wu & Haibo Bai & Yanlong Chen & Hai Pu & Kai Zhang, 2020. "Mechanical Properties and Damage in Lignite under Combined Cyclic Compression and Shear Loading," Sustainability, MDPI, vol. 12(20), pages 1-21, October.
  • Handle: RePEc:gam:jsusta:v:12:y:2020:i:20:p:8393-:d:426757
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/12/20/8393/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/12/20/8393/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Yanlong Chen & Haoshuai Wu & Hai Pu & Kai Zhang & Feng Ju & Yu Wu & Jiangfeng Liu, 2020. "Investigations of Damage Characteristics in Rock Material Subjected to the Joint Effect of Cyclic Loading and Impact," Energies, MDPI, vol. 13(9), pages 1-21, May.
    2. Liang Chen & Xianbiao Mao & Peng Wu, 2020. "Effect of High Temperature and Inclination Angle on Mechanical Properties and Fracture Behavior of Granite at Low Strain Rate," Sustainability, MDPI, vol. 12(3), pages 1-25, February.
    3. Liang Chen & Peng Wu & Yanlong Chen & Wei Zhang, 2020. "Experimental Study on Physical-mechanical Properties and Fracture Behaviors of Saturated Yellow Sandstone Considering Coupling Effect of Freeze-Thaw and Specimen Inclination," Sustainability, MDPI, vol. 12(3), pages 1-27, January.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sergey Zhironkin & Michal Cehlár, 2021. "Coal Mining Sustainable Development: Economics and Technological Outlook," Energies, MDPI, vol. 14(16), pages 1-8, August.
    2. Naseer Muhammad Khan & Kewang Cao & Qiupeng Yuan & Mohd Hazizan Bin Mohd Hashim & Hafeezur Rehman & Sajjad Hussain & Muhammad Zaka Emad & Barkat Ullah & Kausar Sultan Shah & Sajid Khan, 2022. "Application of Machine Learning and Multivariate Statistics to Predict Uniaxial Compressive Strength and Static Young’s Modulus Using Physical Properties under Different Thermal Conditions," Sustainability, MDPI, vol. 14(16), pages 1-27, August.
    3. Ivica Pavičić & Zlatko Briševac & Anja Vrbaški & Tonći Grgasović & Željko Duić & Deni Šijak & Ivan Dragičević, 2021. "Geometric and Fractal Characterization of Pore Systems in the Upper Triassic Dolomites Based on Image Processing Techniques (Example from Žumberak Mts, NW Croatia)," Sustainability, MDPI, vol. 13(14), pages 1-18, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:12:y:2020:i:20:p:8393-:d:426757. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.