Determination of Initial Stiffness of Timber–Steel Composite (TSC) Beams Based on Experiment and Simulation Modeling

Due to improvements in the use of recyclable materials in construction, timber–steel composite (TSC) beams demonstrate high potential for future construction. In this study, a proposed simulation modeling, which was adopted from the simulation modeling of a timber I-shape composite, was applied to estimate the initial stiffness of TSC beams. The strength of each beam could be determined once the initial stiffness was estimated. In addition, a series of experiments were performed to examine the accuracy of the proposed simulation modeling, including the effects of different shapes of steel members, fasteners, and applying and not applying a dowel connection. The results indicated that the simulation modeling could adequately determine strength at a deflection of 1/360 of the span. The ratio of difference between the experimental results and the simulation modeling results was less than 10% if a dowel connection at the web was applied. However, the ratio of difference reached 26% and 24% in the TSC beams without a dowel connection at the web that were fastened with screws and nails at the flange, respectively, revealing the importance of applying a dowel connection at the web. Moreover, the strength of the TSC beams with a dowel connection at the web that were fastened by screws was approximately 15% higher than that of TSC beams without screw fasteners. In conclusion, the proposed simulation modeling can provide designers with a method for estimating the initial stiffness and strength of TSC beams within a deflection of 1/360 of the span, supporting the future application of TSC beams in construction.