IDEAS home Printed from https://ideas.repec.org/a/gam/jresou/v8y2019i2p107-d238387.html
   My bibliography  Save this article

Effect of Ambient Parameters on the Temperature Distribution of Photovoltaic (PV) Modules

Author

Listed:
  • Divine Atsu

    (Doctoral School of Mechanical Engineering, Szent Istvan University, 2100 Godollo, Hungary
    Department of Energy Systems Engineering, Koforidua Technical University, KF-981 Koforidua, Ghana)

  • Alok Dhaundiyal

    (Doctoral School of Mechanical Engineering, Szent Istvan University, 2100 Godollo, Hungary)

Abstract

This paper pivots around the influence of thermal parameters on the temperature distribution of a (PV) module. The solar irradiance, ambient temperature, and heat transfer coefficient were examined for four differently manufactured solar modules. A finite element analysis of the solar system was carried out to simulate the prevailing thermal conditions. It was determined through analysis that the heat transfer coefficient had a significant effect on the boundaries of the PV modules. The temperature gradient was relatively high at the boundary, whereas the main body had the least deviation from the mean value of experimental data. The high value of irradiance is favorable for a large PV system, while the heat transfer coefficient should be low for avoiding undulation of the thermal gradient across the plate. The temperature distribution on the surface of the PV modules largely depended on the geometry and the material used for the design purpose.

Suggested Citation

  • Divine Atsu & Alok Dhaundiyal, 2019. "Effect of Ambient Parameters on the Temperature Distribution of Photovoltaic (PV) Modules," Resources, MDPI, vol. 8(2), pages 1-12, June.
    • Handle: RePEc:gam:jresou:v:8:y:2019:i:2:p:107-:d:238387
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2079-9276/8/2/107/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2079-9276/8/2/107/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Siddiqui, M.U. & Arif, A.F.M., 2013. "Electrical, thermal and structural performance of a cooled PV module: Transient analysis using a multiphysics model," Applied Energy, Elsevier, vol. 112(C), pages 300-312.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dan Craciunescu & Laurentiu Fara, 2023. "Investigation of the Partial Shading Effect of Photovoltaic Panels and Optimization of Their Performance Based on High-Efficiency FLC Algorithm," Energies, MDPI, vol. 16(3), pages 1-28, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sargunanathan, S. & Elango, A. & Mohideen, S. Tharves, 2016. "Performance enhancement of solar photovoltaic cells using effective cooling methods: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 382-393.
    2. Imtiaz Hussain, M. & Lee, Gwi Hyun, 2015. "Experimental and numerical studies of a U-shaped solar energy collector to track the maximum CPV/T system output by varying the flow rate," Renewable Energy, Elsevier, vol. 76(C), pages 735-742.
    3. Castanheira, André F.A. & Fernandes, João F.P. & Branco, P.J. Costa, 2018. "Demonstration project of a cooling system for existing PV power plants in Portugal," Applied Energy, Elsevier, vol. 211(C), pages 1297-1307.
    4. Zhou, Jicheng & Zhang, Zhe & Ke, Haoyun, 2019. "PV module temperature distribution with a novel segmented solar cell absorbance model," Renewable Energy, Elsevier, vol. 134(C), pages 1071-1080.
    5. Michael, Jee Joe & S, Iniyan & Goic, Ranko, 2015. "Flat plate solar photovoltaic–thermal (PV/T) systems: A reference guide," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 62-88.
    6. Kandil, A.A. & Awad, Mohamed M. & Sultan, Gamal I. & Salem, Mohamed S., 2022. "Investigating the performance characteristics of low concentrated photovoltaic systems utilizing a beam splitting device under variable cutoff wavelengths," Renewable Energy, Elsevier, vol. 196(C), pages 375-389.
    7. Aly, Shahzada Pamir & Ahzi, Said & Barth, Nicolas, 2019. "An adaptive modelling technique for parameters extraction of photovoltaic devices under varying sunlight and temperature conditions," Applied Energy, Elsevier, vol. 236(C), pages 728-742.
    8. Osma-Pinto, German & Ordóñez-Plata, Gabriel, 2020. "Dynamic thermal modelling for the prediction of the operating temperature of a PV panel with an integrated cooling system," Renewable Energy, Elsevier, vol. 152(C), pages 1041-1054.
    9. Nivelle, Philippe & Tsanakas, John A. & Poortmans, Jef & Daenen, Michaël, 2021. "Stress and strain within photovoltaic modules using the finite element method: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    10. Shanmugam, Mathiyazhagan & Maganti, Lakshmi Sirisha, 2023. "Improvement of uniformity of irradiance on truncated compound parabolic concentrator by introducing the homogenizer ratio," Renewable Energy, Elsevier, vol. 204(C), pages 580-592.
    11. Pathak, M.J.M. & Sanders, P.G. & Pearce, J.M., 2014. "Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems," Applied Energy, Elsevier, vol. 120(C), pages 115-124.
    12. Rejeb, Oussama & Gaillard, Leon & Giroux-Julien, Stéphanie & Ghenai, Chaouki & Jemni, Abdelmajid & Bettayeb, Maamar & Menezo, Christophe, 2020. "Novel solar PV/Thermal collector design for the enhancement of thermal and electrical performances," Renewable Energy, Elsevier, vol. 146(C), pages 610-627.
    13. Radwan, Ali & Ahmed, Mahmoud, 2017. "The influence of microchannel heat sink configurations on the performance of low concentrator photovoltaic systems," Applied Energy, Elsevier, vol. 206(C), pages 594-611.
    14. Bevilacqua, Piero & Perrella, Stefania & Bruno, Roberto & Arcuri, Natale, 2021. "An accurate thermal model for the PV electric generation prediction: long-term validation in different climatic conditions," Renewable Energy, Elsevier, vol. 163(C), pages 1092-1112.
    15. Li, Fuxiang & Wu, Wei, 2022. "Coupled electrical-thermal performance estimation of photovoltaic devices: A transient multiphysics framework with robust parameter extraction and 3-D thermal analysis," Applied Energy, Elsevier, vol. 319(C).
    16. Li, Qingxiang & Zhu, Li & Sun, Yong & Lu, Lin & Yang, Yang, 2020. "Performance prediction of Building Integrated Photovoltaics under no-shading, shading and masking conditions using a multi-physics model," Energy, Elsevier, vol. 213(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jresou:v:8:y:2019:i:2:p:107-:d:238387. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.