Author
Listed:
- Xiaoyan Teng
(College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China)
- Can Wang
(Nanjing Research Institute of Electronics Technology, Nanjing 210039, China)
- Xudong Jiang
(Mechanical Power and Engineering College, Harbin University of Science and Technology, Harbin 150080, China)
- Xiangyang Chen
(College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China)
Abstract
To improve the fatigue resistance of engineering structures, topology optimization has always been an effective design strategy. The direct calculation of large-scale local fatigue constraints remains a challenge due to high computational cost. In the past, the constraint aggregation techniques, such as the P-norm method, were often applied to aggregate local fatigue constraints into a global constraint, whereas the resultant optimal solution was not consistent with the original problem. In order to meet the local fatigue constraints accurately and reduce the number of constraints, the augmented Lagrangian scheme is employed to transform the original problem into the unconstrained problem. To evaluate the fatigue strength at every material point of structures under the proportional load with variable amplitude, we adopt the Sines fatigue criterion based on the Palmgren–Miner linear damage assumption. In addition, we solve the fatigue-constrained topology optimization problem on the unstructured polygonal meshes, which are not sensitive to numerical instabilities, such as checkerboard patterns, compared with lower-order triangular and bilateral meshes. We provide some numerical examples to validate the potential of the presented method to solve the fatigue-constrained topology optimization problem. Numerical results demonstrate that the optimized designs considering local fatigue constraints have a higher ratio of fatigue resistance to material consumption than those obtained through the traditional P-norm method. Therefore, the proposed approach retaining the local nature of fatigue constraints is more beneficial for realizing the efficient material utilization in structural topology.
Suggested Citation
Xiaoyan Teng & Can Wang & Xudong Jiang & Xiangyang Chen, 2023.
"Structural Topology Optimization with Local Finite-Life Fatigue Constraints,"
Mathematics, MDPI, vol. 11(5), pages 1-17, March.
Handle:
RePEc:gam:jmathe:v:11:y:2023:i:5:p:1220-:d:1085502
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:11:y:2023:i:5:p:1220-:d:1085502. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.