Author
Listed:
- Evgeniy Prikhodko
(Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan)
- Alexandr Nikiforov
(Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan)
- Akmaral Kinzhibekova
(Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan)
- Nazgul Aripova
(Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan)
- Amangeldy Karmanov
(Department of Heat Power Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan)
- Vladimir Ryndin
(Department of Mechanics and Oil and Gas Engineering, Toraighyrov University, 64 Lomov Str., Pavlodar 140000, Kazakhstan)
Abstract
An important element of the operation of high-temperature aggregates are modes that change over time. During these modes, maximum temperature changes are recorded in the cross-section of the lining of the aggregate. The difference in temperature leads to the formation of thermal stresses, which are the main reason for the repair of aggregates. During rapid heating, the inner layers of the lining are subjected to compressive stresses, while during rapid cooling, these layers experience tensile stresses. Under the same conditions, rapid cooling of the lining is more critical, since refractories have poor resistance to tension. The purpose of the study is to calculate and analyze the thermal stresses that arise during cooling of the casting ladle lining. The stresses are determined based on the calculation of the unsteady temperature field of the lining. Thermal stress values are necessary for analysis of the current cooling rates of casting ladles and subsequent development of optimal cooling modes for the lining. To solve the heat conductivity equation, a numerical method was chosen using an implicit four-point difference scheme. To study the cooling process of the casting ladle lining, temperature measurements were carried out in the zone of the greatest wear of the lining. Under conditions of natural convection, cooling of the casting ladle lining occurs unevenly. Cooling schedules during natural convection are characterized by significant unevenness and high rates of temperature decrease. The cooling rates of the inner surface of the lining at the initial stage of cooling significantly exceed the values recommended in the technical literature. Such cooling rates lead to the appearance of significant thermal stresses in the lining. For a refractory that has not been in service, the maximum thermal compressive stresses exceed the ultimate compressive strength by 1.27 times, and the tensile stresses exceed the corresponding limit values by 4.4 times. For refractories that have worked three fuses in the ladle lining, the maximum thermal compressive stresses exceed the ultimate compressive strength by 1.28 times, and the tensile stresses exceed the corresponding limit values by 3.19 times. The studied cooling modes for the casting ladle lining are unacceptable for operation. Cooling, taking into account the indicated rates, leads to the destruction of the lining material. To increase the resistance and duration of the working campaign of casting ladle linings, it is necessary to develop cooling modes for the lining at speeds at which the resulting thermal stresses do not exceed the strength of the refractory materials.
Suggested Citation
Evgeniy Prikhodko & Alexandr Nikiforov & Akmaral Kinzhibekova & Nazgul Aripova & Amangeldy Karmanov & Vladimir Ryndin, 2024.
"Analysis of the Cooling Modes of the Lining of a Ferroalloy-Casting Ladle,"
Energies, MDPI, vol. 17(5), pages 1-12, March.
Handle:
RePEc:gam:jeners:v:17:y:2024:i:5:p:1229-:d:1351094
Download full text from publisher
Most related items
These are the items that most often cite the same works as this one and are cited by the same works as this one.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:5:p:1229-:d:1351094. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.