Author
Listed:
- Liang Cheng
(Research Institute of Geological Exploration and Development, Chuanqing Drilling Engineering Company, Ltd., China National Petroleum Corporation (CNPC), Chengdu 610500, China
International Nature Gas Technology Support Center, China National Petroleum Corporation (CNPC), Chengdu 610500, China)
- Yang Xie
(Research Institute of Geological Exploration and Development, Chuanqing Drilling Engineering Company, Ltd., China National Petroleum Corporation (CNPC), Chengdu 610500, China
International Nature Gas Technology Support Center, China National Petroleum Corporation (CNPC), Chengdu 610500, China)
- Jie Chen
(International Ltd., Chuanqing Drilling Engineering Company, Ltd., China National Petroleum Corporation (CNPC), Chengdu 610500, China)
- Xiao Wang
(State Key Laboratory of Oil & Gas Reservoir and Exploitation, Southwest Petroleum University, Chengdu 610500, China
School of Petroleum and Natural Gas Engineering, Southwest Petroleum University, Chengdu 610500, China)
- Zhongming Luo
(Research Institute of Geological Exploration and Development, Chuanqing Drilling Engineering Company, Ltd., China National Petroleum Corporation (CNPC), Chengdu 610500, China
International Nature Gas Technology Support Center, China National Petroleum Corporation (CNPC), Chengdu 610500, China)
- Guo Chen
(Research Institute of Geological Exploration and Development, Chuanqing Drilling Engineering Company, Ltd., China National Petroleum Corporation (CNPC), Chengdu 610500, China
International Nature Gas Technology Support Center, China National Petroleum Corporation (CNPC), Chengdu 610500, China)
Abstract
Our target USH reservoir in the D oilfield is characterized by “inverse rhythm” deposition with the noticeable features of “high porosity and low permeability”. The reservoir has been developed with waterflooding using horizontal wells. Due to the strong heterogeneity of the reservoir, water channeling is severe, and the water cut has reached 79%. Considering the high temperature and high salinity reservoir conditions, polymer microspheres (PMs) were selected to realize conformance control. In this study, characterization of the polymer microsphere suspension was achieved via morphology, size distribution, and viscosity measurement. Furthermore, a multi-scale visualization study of the reservoir development process, including waterflooding, polymer microsphere flooding, and subsequent waterflooding, was conducted using macro-scale coreflooding and calcite-etched micromodels. It was revealed that the polymer microspheres could swell in the high salinity brine (170,000 ppm) by 2.7 times if aged for 7 days, accompanied by a viscosity increase. This feature is beneficial for the injection at the wellbore while swelled to work as a profile control agent in the deep formation. The macro-scale coreflood with a 30 cm × 30 cm × 4.5 cm layer model with 108 electrodes installed enabled the oil distribution visualization from different perpendicular cross sections. In this way, the in situ conformance control ability of the polymer microsphere was revealed both qualitatively and quantitatively. Furthermore, building on the calcite-etched visible micro-model, the pore-scale variation of the residual oil when subjected to waterflooding, polymer microsphere waterflooding, and subsequent waterflooding was collected, which revealed the oil displacement efficiency increase by polymer microspheres directly. The pilot test in the field also proves the feasibility of conformance control by the polymer microspheres, i.e., more than 40,000 bbls of oil increase was observed in the produces, accompanied by an obvious water reduction.
Suggested Citation
Liang Cheng & Yang Xie & Jie Chen & Xiao Wang & Zhongming Luo & Guo Chen, 2024.
"Multi-Scale Visualization Study of Water and Polymer Microsphere Flooding through Horizontal Wells in Low-Permeability Oil Reservoir,"
Energies, MDPI, vol. 17(18), pages 1-17, September.
Handle:
RePEc:gam:jeners:v:17:y:2024:i:18:p:4597-:d:1477484
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:18:p:4597-:d:1477484. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.