Author
Listed:
- Xiaodong Dong
(Xizang Autonomous Region Energy Research Demonstration Center, Lhasa 850015, China)
- Chuanhui Zhu
(The College of Electrical Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou 310018, China)
Abstract
Thermal storage technology has received increasing attention under the policy of encouraging the development of renewable energy and new clean energy. Optimizing the heat exchange system of phase change thermal storage heat exchangers to obtain better performance has become increasingly urgent. This study comprehensively investigated the actual process of heat transfer and assessed the heat transfer correlation laws between the heat transfer fluids, heat exchange tubes, fins, and phase change materials. Taking the heat exchange efficiency of the heat exchanger as a guide, a simulation was conducted on the effect of the presence and quantity of fins as well as the flow rate of the cooling liquid on the heat exchange efficiency of the heat exchanger. The simulation results showed that too many or too few fins were not conducive to improving heat transfer efficiency. In addition, no positive correlation was observed between the flow rate of the cooling liquid in the heat exchanger and the heat transfer efficiency of the heat exchanger. Specifically, models with slightly slower cooling liquid flow rates had a higher heat transfer efficiency. After a sensitivity analysis, it was found that the number of fins had a more significant effect on the heat transfer efficiency of the heat exchanger than the flow rate of the cooling liquid. The heat exchanger with five fins and a cooling liquid flow rate of 0.1 m/s demonstrated the best heat transfer effect, achieving a temperature drop of 14.76% within 5 min.
Suggested Citation
Xiaodong Dong & Chuanhui Zhu, 2024.
"Research on the Heat Transfer Performance of Phase Change Heat Storage Heat Exchangers Based on Heat Transfer Optimization,"
Energies, MDPI, vol. 17(16), pages 1-14, August.
Handle:
RePEc:gam:jeners:v:17:y:2024:i:16:p:4150-:d:1460417
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:16:p:4150-:d:1460417. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.